Impact of foundation layer characteristics on the seismic response of a tailings dam

The foundation layer thickness and stiffness impact the site response by influencing the fundamental frequencies and vibration modes in soil structure interaction (SSI) problems. From a practical perspective, the geotechnical characterisation of earthfill dams is typically focused on the borrow materials comprising the dam, while the foundation materials are often under-characterised, with the depth to the bedrock commonly only approximately estimated. In the seismic response of dams, these unknowns may also impact the deformation patterns affecting the overall stability of the dam. A back-analysis of seismic recorded data for an existing tailings sand dam is performed, to determine the thickness and stiffness of the soil foundation layer by finite element analysis. A cyclic non-linear model (CNL) is employed in the Finite Element analyses which consider different depths to bedrock and soil stiffness profiles. The results suggest satisfactory agreement with the recorded data in terms of acceleration response spectra and amplification ratios and highlight the impact of the foundation layer characteristics on the overall dam response

Which competitive advantages can firms really obtain from ISO14001 certification?

Ten years after the introduction of ISO14001, in this paper we present empirical evidence about the competitive advantages that managers associate to this environmental practice, from a sample of industrial firms located in Spain. The results indicate that the potential competitive advantages are: improvement of the internal efficiency, differentiation advantages, attention to the stakeholders’ requirements, enhancement of the competitive position in the sector and financial savings. Nevertheless managers’ expectations of improving internal efficiency might be the real reason that encourages firms to make the voluntary decision of investing in ISO14001 certificationPeer Reviewe

Comparison of a tailings material and a natural sand in seismic site response analyses

This article investigates the seismic response of a tailings sand material in the context of site response analysis. The computed response is contrasted with that obtained for an equivalent deposit consisting of a well-characterised natural sand. Initially, the fundamental properties of both materials are used to interpret and compare their behaviour in the framework of Critical State Soil Mechanics (CSSM). Subsequently, both materials' monotonic and cyclic responses are calibrated for an advanced bounding surface plasticity model. Finally, the impact of different calibration approaches is examined through site response analyses under a strong motion. This process identifies fundamental differences between the two geo-materials, impacting the single elements simulations, especially the accuracy of undrained cyclic triaxial tests. The site response analyses examined herein show the impact of the calibrations adopted for both materials in terms of acceleration response spectra, displacements, and excess of pore water pressures (PWP). Although a relatively deep phreatic surface is adopted, the cyclic resistance and permeability of both materials plays a dominant role in the site response characteristics, controlling the excess PWP generation and hence the non-linear behaviour in the soil deposit. Finally, parametric studies are also conducted to explore the impact of permeability of the sands in the site response

Bimetallic derivatives of the [M(en)3]3+ ion (M=Cr and Co): A series of compounds with unusual magnetic and structural properties (abstract)

Under the terms of the Creative Commons Attribution (CC BY) license to their work.The crystal structure and magnetic susceptibility of a series of [M(en)3]3+ (M=Cr or Co) derivatives are described. In particular, the crystalline structures of (1) [Cr(en) 3]3[FeCl6]Cl6·H2O, (2) [Co(en)3]3[FeCl6]Cl6· H2O, and (3) [Cr(en)3][FeCl6]·11H 2O are reported. Structural data, in Å, for these compounds are as follows: (1) space group R3, a=15.447(4), c=21.060(6), Z=3; (2) space group R3, a=15.346(3), c=20.880(5), Z=3; (3) space group P3c1, a=11.654(3), c=15.508(4), Z=2. The main structural feature of the first two isomorphous materials is that they consist of a three-dimensional network of triangular antiprisms formed by the [M(en)3]3+ (M=Cr or Co) ions and connected with each other by sharing corners. An [FeCl 6]3- ion is placed at the center of each antiprism. Compound (3) contains a sc arrangement of [Cr(en)3] 3+ and [FeCl6]3- octahedra. In addition, the magnetic susceptibilities of the above-mentioned isomorphous compounds and of [M(en)3][FeCl6] (M=Cr and Co) and [Cr(en)3][InCl6] are reported. While [Cr(en) 3]3[FeCl6]Cl6·H2O orders as a ferrimagnet at 0.91 K, [Cr(en)3][FeCl6] exhibits antiferromagnetic properties with Tc=2.26 K, a temperature rather similar to the antiferromagnetic ordering temperature of [Co(en) 3][FeCl6].Peer Reviewe

The PhoP-Dependent ncRNA Mcr7 Modulates the TAT Secretion System in Mycobacterium tuberculosis

The PhoPR two-component system is essential for virulence in Mycobacterium tuberculosis where it controls expression of approximately 2% of the genes, including those for the ESX-1 secretion apparatus, a major virulence determinant. Mutations in phoP lead to compromised production of pathogen-specific cell wall components and attenuation both ex vivo and in vivo. Using antibodies against the native protein in ChIP-seq experiments (chromatin immunoprecipitation followed by high-throughput sequencing) we demonstrated that PhoP binds to at least 35 loci on the M. tuberculosis genome. The PhoP regulon comprises several transcriptional regulators as well as genes for polyketide synthases and PE/PPE proteins. Integration of ChIP-seq results with high-resolution transcriptomic analysis (RNA-seq) revealed that PhoP controls 30 genes directly, whilst regulatory cascades are responsible for signal amplification and downstream effects through proteins like EspR, which controls Esx1 function, via regulation of the espACD operon. The most prominent site of PhoP regulation was located in the intergenic region between rv2395 and PE_PGRS41, where the mcr7 gene codes for a small non-coding RNA (ncRNA). Northern blot experiments confirmed the absence of Mcr7 in an M. tuberculosis phoP mutant as well as low-level expression of the ncRNA in M. tuberculosis complex members other than M. tuberculosis. By means of genetic and proteomic analyses we demonstrated that Mcr7 modulates translation of the tatC mRNA thereby impacting the activity of the Twin Arginine Translocation (Tat) protein secretion apparatus. As a result, secretion of the immunodominant Ag85 complex and the beta-lactamase BlaC is affected, among others. Mcr7, the first ncRNA of M. tuberculosis whose function has been established, therefore represents a missing link between the PhoPR two-component system and the downstream functions necessary for successful infection of the host

Effects of a nanoemulsion with Copaifera officinalis oleoresin against monogenean parasites of Colossoma macropomum: A Neotropical Serrasalmidae.

Monogeneans are ectoparasites that may cause losses in production and productivity in the aquaculture of Colossoma macropomum. Chemotherapeutics used in aquaculture usually have major adverse effects on fish; hence, the use of essential oils has been considered advantageous, but these are not soluble in water. Thus, the use of nanostructures to enhance water solubility of compounds and improve bioactivity may be very promising. This study investigated the antiparasitic activity of nanoemulsion prepared with Copaifera officinalis oleoresin (50, 100, 150, 200 and 300 mg/L), against monogenean parasites from the gills of C. macropomum. The particle size distribution and zeta potential suggested that a potentially kinetic stable system was generated. The nanoemulsion from C. officinalis oleoresin achieved high efficacy (100%) at low concentrations (200 and 300 mg/L) after 15 min of exposure. This was the first time that a nanoemulsion was generated from C. officinalis oleoresin using a solvent-free, non-heating and low-energy method. Moreover, this was the first time that an antiparasitic against monogeneans on fish gills, based on nanoemulsion of C. officinalis oleoresin, was tested

Epicure: a European epidemiological study of patients with an advanced or metastatic Urothelial Carcinoma (UC) having progressed to a platinum-based chemotherapy

Background: Platinum-based systemic chemotherapy is considered the backbone for management of advanced urothelial carcinomas. However there is a lack of real world data on the use of such chemotherapy regimens, on patient profiles and on management after treatment failure. Methods: Fifty-one randomly selected physicians from 4 European countries registered 218 consecutive patients in progression or relapse following a first platinum-based chemotherapy. Patient characteristics, tumor history and treatment regimens, as well as the considerations of physicians on the management of urothelial carcinoma were recorded. Results: A systemic platinum-based regimen had been administered as the initial chemotherapy in 216 patients: 15 in the neoadjuvant setting, 61 in adjuvant therapy conditions, 137 in first-line advanced setting and 3 in other conditions. Of these patients, 76 (35 %) were initially considered as cisplatin-unfit, mainly because of renal impairment (52 patients). After platinum failure, renal impairment was observed in 44 % of patients, ECOG Performance Status ≥ 2 in 17 %, hemoglobinemia 30 % patients). The most frequent all-settings second anticancer therapy regimen was vinflunine (70 % of single-agent and 42 % of all subsequent treatments), the main reasons evoked by physicians (>1 out of 4) being survival benefit, safety and phase III evidence. Conclusion: In this daily practice experience, a majority of patients with urothelial carcinoma previously treated with a platinum-based therapy received a second chemotherapy regimen, most often a single agent after an initial chemotherapy in the advanced setting and preferably a cytotoxic combination after a neoadjuvant or adjuvant chemotherapy. Performance Status and prior response to chemotherapy were the main drivers of further treatment decisions

Effect of surface chemistry and associated protein corona on the long-term biodegradation of iron oxide nanoparticles in Vivo

The protein corona formed on the surface of a nanoparticle in a biological medium determines its behavior in vivo. Herein, iron oxide nanoparticles containing the same core and shell, but bearing two different surface coatings, either glucose or poly(ethylene glycol), were evaluated. The nanoparticles' protein adsorption, in vitro degradation, and in vivo biodistribution and biotransformation over four months were investigated. Although both types of nanoparticles bound similar amounts of proteins in vitro, the differences in the protein corona composition correlated to the nanoparticles biodistribution in vivo. Interestingly, in vitro degradation studies demonstrated faster degradation for nanoparticles functionalized with glucose, whereas the in vivo results were opposite with accelerated biodegradation and clearance of the nanoparticles functionalized with poly(ethylene glycol). Therefore, the variation in the degradation rate observed in vivo could be related not only to the molecules attached to the surface, but also with the associated protein corona, as the key role of the adsorbed proteins on the magnetic core degradation has been demonstrated in vitro

Understanding factors associated with the translation of cardiovascular research: A multinational case study approach

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited.This article has been made available through the Brunel Open Access Publishing Fund.Background: Funders of health research increasingly seek to understand how best to allocate resources in order to achieve maximum value from their funding. We built an international consortium and developed a multinational case study approach to assess benefits arising from health research. We used that to facilitate analysis of factors in the production of research that might be associated with translating research findings into wider impacts, and the complexities involved. Methods: We built on the Payback Framework and expanded its application through conducting co-ordinated case studies on the payback from cardiovascular and stroke research in Australia, Canada and the United Kingdom. We selected a stratified random sample of projects from leading medical research funders. We devised a series of innovative steps to: minimize the effect of researcher bias; rate the level of impacts identified in the case studies; and interrogate case study narratives to identify factors that correlated with achieving high or low levels of impact. Results: Twenty-nine detailed case studies produced many and diverse impacts. Over the 15 to 20 years examined, basic biomedical research has a greater impact than clinical research in terms of academic impacts such as knowledge production and research capacity building. Clinical research has greater levels of wider impact on health policies, practice, and generating health gains. There was no correlation between knowledge production and wider impacts. We identified various factors associated with high impact. Interaction between researchers and practitioners and the public is associated with achieving high academic impact and translation into wider impacts, as is basic research conducted with a clinical focus. Strategic thinking by clinical researchers, in terms of thinking through pathways by which research could potentially be translated into practice, is associated with high wider impact. Finally, we identified the complexity of factors behind research translation that can arise in a single case. Conclusions: We can systematically assess research impacts and use the findings to promote translation. Research funders can justify funding research of diverse types, but they should not assume academic impacts are proxies for wider impacts. They should encourage researchers to consider pathways towards impact and engage potential research users in research processes. © 2014 Wooding et al.; licensee BioMed Central Ltd.RAND Europe and HERG, with subsequent funding from the NHFA, the HSFC and the CIHR. This research was also partially supported by the Policy Research Programme in the English Department of Health

Preparation of a Nanoemulsion with Carapa guianensis

Andiroba (Carapa guianensis) seeds are the source of an oil with a wide range of biological activities and ethnopharmacological uses. However, few studies have devoted attention to innovative formulations, including nanoemulsions. The present study aimed to obtain a colloidal system with the andiroba oil using a low-energy and organic-solvent-free method. Moreover, the preliminary residual larvicidal activity of the nanoemulsion against Aedes aegypti was evaluated. Oleic and palmitic acids were the major fatty acids, in addition to the phytosterol β-sitosterol and limonoids (tetranortriterpenoids). The required hydrophile-lipophile was around 11.0 and the optimal nanoemulsion was obtained using polysorbate 85. The particle size distribution suggested the presence of small droplets (mean diameter around 150 nm) and low polydispersity index (around 0.150). The effect of temperature on particle size distribution revealed that no major droplet size increase occurred. The preliminary residual larvicidal assay suggested that the mortality increased as a function of time. The present study allowed achievement of a potential bioactive oil in water nanoemulsion that may be a promising controlled release system. Moreover, the ecofriendly approach involved in the preparation associated with the great bioactive potential of C. guianensis makes this nanoemulsion very promising for valorization of this Amazon raw material