41 research outputs found

    Laser spot welding of laser textured steel to aluminium

    Get PDF
    Laser welding of dissimilar metals (steel and aluminium) was investigated with the aim to increase the maximum tensile shear load of the Fe-Al joints. The increase was achieved by texturing the surface of steel prior to the laser spot welding process which was performed in a lap-joint configuration with the steel positioned on top of the aluminium and with a texture faced down to the aluminium surface. This configuration enabled an increase of the bonding area of the joints, because the molten aluminium filled in the gaps of the texture, without the need of increasing the process energy which typically leads to the growth of the intermetallic compounds. Different textures (containing hexagonally arranged craters, parallel lines, grid and spiral patterns) were tested with different laser welding parameters. The Fe-Al joints obtained with the textured steel were found to have up to 25% higher maximum tensile-shear load than the joints obtained with the untextured steel

    In-situ multicore fibre-based pH mapping through obstacles in integrated microfluidic devices

    Full text link
    Microfluidic systems with integrated sensors are ideal platforms to study and emulate processes such as complex multiphase flow and reactive transport in porous media, numerical modeling of bulk systems in medicine, and in engineering. Existing commercial optical fibre sensing systems used in integrated microfluidic devices are based on single-core fibres, limiting the spatial resolution in parameter measurements in such application scenarios. Here, we propose a multicore fibre-based pH system for in-situ pH mapping with tens of micrometer spatial resolution in microfluidic devices. The demonstration uses custom laser-manufactured glass microfluidic devices (called further micromodels) consisting of two round ports. The micromodels comprise two lintels for the injection of various pH buffers and an outlet. The two-port system facilitates the injection of various pH solutions using independent pressure pumps. The multicore fibre imaging system provides spatial information about the pH environment from the intensity distribution of fluorescence emission from the sensor attached to the fibre end facet, making use of the cores in the fibre as independent measurement channels. As a proof-of-concept, we performed pH measurements in micromodels through obstacles (glass and rock beads), showing that the particle features can be clearly distinguishable from the intensity distribution from the fibre sensor.Comment: 12 pages of main draft with 10 figures, 2 pages of supplementary information with 3 figures. Total 14 page

    Nanosecond laser texturing for high friction applications

    Get PDF
    AbstractA nanosecond pulsed Nd:YAG fibre laser with wavelength of 1064nm was used to texture several different steels, including grade 304 stainless steel, grade 316 stainless steel, Cr–Mo–Al ‘nitriding’ steel and low alloy carbon steel, in order to generate surfaces with a high static friction coefficient. Such surfaces have applications, for example, in large engines to reduce the tightening forces required for a joint or to secure precision fittings easily. For the generation of high friction textures, a hexagonal arrangement of laser pulses was used with various pulse overlaps and pulse energies. Friction testing of the samples suggests that the pulse energy should be high (around 0.8mJ) and the laser pulse overlap should be higher than 50% in order to achieve a static friction coefficient of more than 0.5. It was also noted that laser processing increases the surface hardness of samples which appears to correlate with the increase in friction. Energy-Dispersive X-ray spectroscopy (EDX) measurements indicate that this hardness is caused by the formation of hard metal-oxides at the material surface

    Review of Microfluidic Devices and Imaging Techniques for Fluid Flow Study in Porous Geomaterials

    Get PDF
    Understanding transport phenomena and governing mechanisms of different physical and chemical processes in porous media has been a critical research area for decades. Correlating fluid flow behaviour at the micro-scale with macro-scale parameters, such as relative permeability and capillary pressure, is key to understanding the processes governing subsurface systems, and this in turn allows us to improve the accuracy of modelling and simulations of transport phenomena at a large scale. Over the last two decades, there have been significant developments in our understanding of pore-scale processes and modelling of complex underground systems. Microfluidic devices (micromodels) and imaging techniques, as facilitators to link experimental observations to simulation, have greatly contributed to these achievements. Although several reviews exist covering separately advances in one of these two areas, we present here a detailed review integrating recent advances and applications in both micromodels and imaging techniques. This includes a comprehensive analysis of critical aspects of fabrication techniques of micromodels, and the most recent advances such as embedding fibre optic sensors in micromodels for research applications. To complete the analysis of visualization techniques, we have thoroughly reviewed the most applicable imaging techniques in the area of geoscience and geo-energy. Moreover, the integration of microfluidic devices and imaging techniques was highlighted as appropriate. In this review, we focus particularly on four prominent yet very wide application areas, namely “fluid flow in porous media”, “flow in heterogeneous rocks and fractures”, “reactive transport, solute and colloid transport”, and finally “porous media characterization”. In summary, this review provides an in-depth analysis of micromodels and imaging techniques that can help to guide future research in the in-situ visualization of fluid flow in porous media
    corecore