Minimal Energy Routing for Deep Space Satellite Networks

The purpose of this research is to find out a packet routing algorithm for link error rate aware satellite networks, achieving minimal network energy utilization. The existing energy aware routing protocols typically select routes that minimize the total transmission power over the satellites of the path, but do not consider the retransmissions that may be needed. A new protocol considering the link error rates in route selections for satellite networks is required. In our approach of data routing, the effective total transmissions and the energy required for these transmissions is considered. The simulator developed in C#.NET was designed and programmed to simulate and analyze the proposed link error rate aware routing protocol performance. Satellite network models for the simulation were developed using BRITE, a topology generator framework. Simulations are performed and the algorithm performance is analyzed in terms of energy load balance and schedule lengths.Computer Science Departmen

Esthetic Replacement of Maxillary Lateral Incisor with Mary Lever Prosthesis: A Novel Conservative Approach

Dentists often question the use of resin-bonded fixed partial dentures (RBFPDs) for reliable restoration of tooth-bound edentulous spaces. Initial attempts at bonding fixed partialdentures on teeth resulted in early failure due to debonding. In the 1980s and 1990s, improvements in preparation methods, metal alloys and bonding techniques made the RBFPD a more predictable option. This article provides a case report of a restoring a missing maxillary lateral incisor with modified Maryland with the advantages of being fixed to provide a stronger bond as well as being kinder to the periodontal tissues

The rise and sink dependence on the shape of a horizontally wiggling intruder

We investigate the effect of shape and orientation for a horizontally oscillating intruder on its vertical dynamics in a granular medium via Discrete Element Method (DEM) simulations. Five distinct intruder shapes were considered in this study: a disk (OS1), a square (OS2), two rectangles with aspect ratio > 1 (OS3) and < 1 (OS4) respectively, and an equilateral triangle (OS5). The vertical velocity of the oscillating object was observed to be a function of amplitude and frequency (f) (inverse of time period (T)) of oscillation, and the shape of the object. The dynamics of the motion are modelled with the help of a cavity based model which can empirically produce the regimes observed by incorporating the free fall of the particles filling the cavity.The cavity based model assumes that there is a point on the surface of each oscillating object unique to its shape that any grain crossing it will irreversibly reach the bottom of the cavity. This leads to the creation of bed of particles at the bottom of the cavity which increases intruder's elevation as it oscillates, leading to its vertical rise in the granular medium. When an intruder oscillates much faster than the falling rate of the grains, the intruder cannot rise up and thus sinks due to energy provided by the oscillation to the bottom layer. On the contrary, if the intruder oscillates too slow, the cavity gets completely filled much before it returns. The maximum rise rate is thus observed at the oscillation time period where the cavity filling time is equal to the half time period of oscillation. In addition, we observed a minimum amplitude (Amin) below which the vertical position of the IO remains unaltered for various T. We have also presented the time-averaged pressure P, velocity V, and area fraction {\phi} fields around the intruder shapes.Comment: 21 pages, 14 figure

Surgery for Recurrent Glioblastoma

Recurrence of glioblastoma (GB) is inevitable. As the optimal management for recurrent glioblastoma continues to evolve, clear treatment guidelines for are lacking. Existing literature does not clarify the role that second surgery plays in the treatment of these patients. Although few studies report that second surgery is beneficial in select patients and leads to longer overall survival (OS), other studies have demonstrated the limited impact that repeat surgery has on the eventual patient outcome. Maximal safe resection (high extent of resection—EOR) has been proven to improve the OS at reoperation, even when undertaken for cases where the first surgery achieved only a limited EOR. Karnofsky Performance Score (KPS) and age at presentation are valuable prognostic factors that predict better OS and aid in better patient selection for surgical management. The true value of reoperation versus systemic treatment, their effects the patient’s QoL and the added increase in overall survival is better judged after detailed investigation by means of a prospective, randomized trial

Lime-Stabilized Black Cotton Soil and Brick Powder Mixture as Subbase Material

Various researchers, for the past few decades, had tried to stabilize black cotton soil using lime for improving its shrinkage and swelling characteristics. But these days, the cost of lime has increased resulting in increase in need for alternative and cost effective waste materials such as fly ash and rice husk ash. Brick powder, one among the alternative materials, is a fine powdered waste that contains higher proportions of silica and is found near brick kilns in rural areas. The objective of the study is to investigate the use of lime-stabilized black cotton soil and brick powder mixture as subbase material in flexible pavements. Black cotton soil procured from the local area, tested for suitability as subbase material, turned out to be unsuitable as it resulted in very less CBR value. Even lime stabilization of black cotton soil under study has not showed up the required CBR value specified for the subbase material of flexible pavement by MORTH. Hence the lime-stabilized black cotton soil is proportioned with brick powder to obtain optimum mixture that yields a better CBR value. The mixture of 20% brick powder and 80% lime-stabilized black cotton soil under study resulted in increase in the CBR value by about 135% in comparison with lime-stabilized black cotton soil. Thus it is promising to use the mixture of brick powder and lime-stabilized black cotton soil as subbase material in flexible pavements

Home Away from Home

HomeAway is an online business application allowing renters to book their accommodations for rentals of homes or Apartments. This online application allows the owners to update their properties for advertisements and lease them to renters. This website has user friendly functionalities providing services to the customers, owners, and administrators. Just a click away from your destination that quickly you get the best offers as we directly interact with the owners for the benefit of Customers. The service goal of HomeAway project being providing some luxury living, a sense of freedom, caring your loved ones and communities our website goes an extra mile to provide your need connecting to the world. The main goal of this online secure application is to make the job easy allowing everyone to perform quick transactions like for the Owner to manage the property details, Customer to quickly get good deals followed by easy checkout and Administrator to manage properties and financial details. Many such functionalities have been embedded to explore, book and travel benefitting the user

Effectiveness of oral health education versus nicotine replacement therapy for tobacco cessation- a parallel randomized clinical trial

Background: India has millions of tobacco users. It is the leading cause of deaths due to oral cancer and hence needs effective strategies to curb it. Hence the aim of present study was to evaluate and compare the effectiveness of Oral Health Education (OHE) and Nicotine Replacement Therapy (NRT) in tobacco cessation. Material and Methods: The clinical trial consisted of Manohar Lal Kapoor (MLK) factory workers (n= 40) giving history of tobacco consumption (smoking/smokeless) within past 30 days. They were randomized into OHE (n=20) and NRT (n=20) groups. Baseline evaluation (demographic, smoking/ smokeless behaviour) was done. Fagerstrom test was used for Nicotine Dependence (FTND) and to assess nicotine addiction level. Follow up was done at an interval of 1week, 2 weeks, 1 month, 2 months and 3 months to assess the reduction in the mean FTND score. “Nano-CheckTM Rapid Nicotine test” was used for the qualitative detection of cotinine in human urine. Appropriate statistical analysis was performed (Paired and Unpaired t test). Results: In both OHE and NRT group there was a significant reduction ( p < 0.00001) in mean Fagerstrom score at every follow up but when both the groups were compared mean Fagerstrom score reduction was more in NRT than OHE at all time interval though it was not statistically significant ( p >0.05). Conclusions: NRT is better than OHE when both the groups were compared. However, it was found that any intervention given to tobacco users either NRT or OHE is helpful for the patients in the process of quitting tobacc

Efficiency Improvement of Rotary Compressor by Improving the Discharge path through Simulation

To help raise consumer awareness on saving energy and create more energy efficient appliances, the government is upgrading the requirements of star rating of air conditioners. The enhanced star rating in air conditioners will significantly support the energy conservation and protect the environment by reducing greenhouse gas emissions in the fight against climate change. The increasing demand for star rated air-conditioners is compelling the compressor designers to develop & optimize more energy-efficient components. This paper deals with discharge port optimization in a rotary compressor, which is heart of an air-conditioner. The existing discharge port is studied & analyzed for the performance in the aspect of its capacity, EER, mass flow rate, over pressure power, area of PV diagram, motor power, valve functioning & stability. The port is redesigned to obtain improved performance, by analyzing the compressor performance parameters. Analysis is performed to study the stresses on the discharge valve and valve lift. Computational fluid dynamics is used to observe the flow behavior & pressure phenomenon in the rotary compressor, since the compressor shell accumulates the discharge gas pressure. The results are validated with the test and improved EER is observed