Using of high-speed mills for biomass disintegration

ArticleThe need for mechanical disintegration of biomass is very current topic with regard to the requirements of an agrarian sector, beside the importance of a material’s moisture content reduction to be used in further applications. The drawbacks of commonly applied devices are the limited use of moist biomass and high energy consumption for disintegration. In collaboration with LAVARIS company, there were tested two high-speed mills LAV 400/1R with single rotor (used for a first milling) and LAV 300/2R with double rotors (used for a second milling), which were primarily designed for crushing of concrete, rubber and construction waste. The goal of the new technical solution was a disintegration of biomass on example of pine sawdust and miscanthus together with examination of simultaneous drying in order to achieve a desired fraction (particle size) and moisture content of biomass material. Experimental tests on highspeed mills have shown the following results: in case of pine sawdust about 98% of output particle size after passing through the first and second milling was smaller than 1.5 mm, and smaller than 1 mm for miscanthus (sieve analysis method was used for determination), i.e. significant reduction was achieved comparing to initial particle size. Moisture content of the materials after disintegration (first and second) decreased from 37.08% to 8.55% for pine sawdust and from 24.43% to 7.19% for miscanthus. Based on the results, it can be concluded that the mechanical disintegration of biomass by high-speed mills has a great potential to become an effective part of raw materials’ pre-treatment technology, not only in agriculture, but also in production of different types of biofuels

Geosmithia associated with bark beetles and woodborers in the western USA : taxonomic diversity and vector specificity

Fungi in the genus Geosmithia (Ascomycota: Hypocreales) are frequent associates of bark beetles and woodborers that colonize hardwood and coniferous trees. One species, Geosmithia morbida, is an economically damaging invasive species. The authors surveyed the Geosmithia species of California and Colorado, USA, to (i) provide baseline data on taxonomy of Geosmithia and beetle vector specificity across the western USA; (ii) investigate the subcortical beetle fauna for alternative vectors of the invasive G. morbida; and (iii) interpret the community composition of this region within the emerging global biogeography of Geosmithia. Geosmithia was detected in 87% of 126 beetle samples obtained from 39 plant species. Twenty-nine species of Geosmithia were distinguished, of which 13 may be new species. Bark beetles from hardwoods, Cupressus, and Sequoia appear to be regular vectors, with Geosmithia present in all beetle gallery systems examined. Other subcortical insects appear to vector Geosmithia at lower frequencies. Overall, most Geosmithia have a distinct level of vector specificity (mostly high, sometimes low) enabling their separation to generalists and specialists. Plant pathogenic Geosmithia morbida was not found in association with any other beetle besides Pityophthorus juglandis. However, four additional Geosmithia species were found in P. juglandis galleries. When integrated with recent data from other continents, a global pattern of Geosmithia distribution across continents, latitudes, and vectors is emerging: of the 29 Geosmithia species found in the western USA, 12 have not been reported outside of the USA. The most frequently encountered species with the widest global distribution also had the broadest range of beetle vectors. Several Geosmithia spp. with very narrow vector ranges in Europe exhibited the similar degree of specialization in the USA. Such strong canalization in association could reflect an ancient origin of each individual association, or a recent origin and a subsequent diversification in North America.Czech Grant Agency (grant no. 16-15293Y), Long-Term Research Development Project (grant number RVO 67985939), Ministry of Education, Youth and Sports of the Czech Republic (grant number LO1509), USDA NIFA Western Region IPM Center and Critical Issues—Emerging and New Plant and Animal Pests and Diseases grant programs, USDA Forest Service Forest Health Monitoring Program (Detection Monitoring Grant No. INT-DM-09-01 and Evaluation Monitoring Grant No. INT-EM-B-11-03), USDA Forest Service Special Technology Development Grant R4-2011-01 (administered by A. S. Munson).http://www.tandfonline.com/toc/umyc202018-04-24hj2017Forestry and Agricultural Biotechnology Institute (FABI)Microbiology and Plant Patholog

Outline of Fungi and fungus-like taxa

This article provides an outline of the classification of the kingdom Fungi (including fossil fungi. i.e. dispersed spores, mycelia, sporophores, mycorrhizas). We treat 19 phyla of fungi. These are Aphelidiomycota, Ascomycota, Basidiobolomycota, Basidiomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Entorrhizomycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota. The placement of all fungal genera is provided at the class-, order- and family-level. The described number of species per genus is also given. Notes are provided of taxa for which recent changes or disagreements have been presented. Fungus-like taxa that were traditionally treated as fungi are also incorporated in this outline (i.e. Eumycetozoa, Dictyosteliomycetes, Ceratiomyxomycetes and Myxomycetes). Four new taxa are introduced: Amblyosporida ord. nov. Neopereziida ord. nov. and Ovavesiculida ord. nov. in Rozellomycota, and Protosporangiaceae fam. nov. in Dictyosteliomycetes. Two different classifications (in outline section and in discussion) are provided for Glomeromycota and Leotiomycetes based on recent studies. The phylogenetic reconstruction of a four-gene dataset (18S and 28S rRNA, RPB1, RPB2) of 433 taxa is presented, including all currently described orders of fungi

The preparation and characterization of stannous fluoride materials containing strontium

The reaction of aqueous solutions of strontium nitrate and stannous fluoride results in the formation of a precipitate which is SrSn\sb2F\sb{6\cdot}H\sb2O, or Sr\sb2Sn\sb2NO\sb3F\sb{7\cdot}2H\sb2O, or a mixture of both, depending on the conditions. The reaction has been studied as a function of various reaction parameters, such as molar ratio, order of addition of reagents, mixing speed, time and temperature. The preparation of these materials is described here. The nature of the products was investigated by various analytical techniques, such as atomic absorption spectrophotometry, fluoride ion electrode analysis, infrared spectroscopy, X-ray diffraction, thermal analyses and Mossbauer spectroscopy. Recrystallization of SrSn\sb2F\sb{6\cdot}H\sb2O and Sr\sb2Sn\sb2NO\sb3F\sb{7\cdot}2H\sb2O from nitric acid was performed in primarily an effort to obtain single crystals that could be used for crystal structure determination by X-ray single crystal diffraction. In addition, it was also used to investigate if any new materials are formed by this method, since it is known to happen if PbSnF\sb4 is recrystallized in nitric acid. Furthermore, highly oriented samples and higher purity of both materials are obtained by recrystallization. Reactions between strontium chloride and stannous fluoride in aqueous solutions were also investigated under similar conditions

Exploring Wild <i>Hordeum spontaneum</i> and <i>Hordeum marinum</i> Accessions as Genetic Resources for Fungal Resistance

Crop Wild Relatives (CWRs), as potential sources of new genetic variants, are being extensively studied to identify genotypes that will be able to confer resistance to biotic stresses. In this study, a collection of barley wild relatives was assessed in the field, and their phenotypic variability was evaluated using a Barley Description List, reflecting the identified ecosites. Overall, the CWRs showed significant field resistance to various fungal diseases. To further investigate their resistance, greenhouse tests were performed, revealing that several CWRs exhibited resistance against Fusarium culmorum, Pyrenophora teres, and Puccinia hordei G.H. Otth. Additionally, to characterize the genetic diversity within the collection, DNA polymorphisms at 21 loci were examined. We successfully employed barley-specific SSR markers, confirming their suitability for identifying H. spontaneum and even H. marinum, i.e., perennial species. The SSR markers efficiently clustered the investigated collection according to species and ecotypes, similarly to the phenotypic assessment. Moreover, SSR markers associated with disease resistance revealed different alleles in comparison to those found in resistant barley cultivars. Overall, our findings highlight that this evaluated collection of CWRs represents a valuable reservoir of genetic variability and resistance genes that can be effectively utilized in breeding programs

Phase Composition of Al-Si Coating from the Initial State to the Hot-Stamped Condition

The chemical and phase composition of the coating and the coating/substrate interface of an Al-Si-coated 22MnB5 hot stamped steel was investigated by means of SEM-EDS, XRD, micro-XRD and electron diffraction. Moreover, the surface profile was analyzed by XPS and roughness measurements. The XPS measurements showed that the thickness of the Si and Al oxide layers increased from 14 to 76 nm after die-quenching, and that the surface roughness increased as well as a result of volume changes caused by phase transformations. In addition to the FeAl(Si) and Fe2Al5 phases and the interdiffusion layer forming complex structures in the coating, electron diffraction confirmed the presence of an Fe2Al5 phase, and also revealed very thin layers of Fe-3(Al,Si)C, Fe-2(Al,Si)(5) and Al-bearing rod-shaped particles in the immediate vicinity of the steel interface. Moreover, the scattered nonuniform layer of the Fe2Al8Si phase was identified in the outermost layer of the coating. Despite numerous studies devoted to researching the phase composition of the Al-Si coating applied to hot stamped steel, electron diffraction revealed very thin layers and particles on the coating/substrate interface and outermost layer, which have not been analyzed in detail

High-Throughput Sequencing Haplotype Analysis Indicates in LRRK2 Gene a Potential Risk Factor for Endemic Parkinsonism in Southeastern Moravia, Czech Republic

Parkinson&rsquo;s disease and parkinsonism are relatively common neurodegenerative disorders. This study aimed to assess potential genetic risk factors of haplotypes in genes associated with parkinsonism in a population in which endemic parkinsonism and atypical parkinsonism have recently been found. The genes ADH1C, EIF4G1, FBXO7, GBA, GIGYF2, HTRA2, LRRK2, MAPT, PARK2, PARK7, PINK1 PLA2G6, SNCA, UCHL1, and VPS35 were analyzed in 62 patients (P) and 69 age-matched controls from the researched area (C1). Variants were acquired by high-throughput sequencing using Ion Torrent workflow. As another set of controls, the whole genome sequencing data from 100 healthy non-related individuals from the Czech population were used (C2); the results were also compared with the Genome Project data (C3). We observed shared findings of four intron (rs11564187, rs36220738, rs200829235, and rs3789329) and one exon variant (rs33995883) in the LRRK2 gene in six patients. A comparison of the C1&ndash;C3 groups revealed significant differences in haplotype frequencies between ratio of 2.09 for C1, 1.65 for C2, and 6.3 for C3, and odds ratios of 13.15 for C1, 2.58 for C2, and 7.6 for C3 were estimated. The co-occurrence of five variants in the LRRK2 gene (very probably in haplotype) could be an important potential risk factor for the development of parkinsonism, even outside the recently described pedigrees in the researched area where endemic parkinsonism is present