Assessment of Resilience in Desalination Infrastructure Using Semi-Markov Models

As the supply of desalinated water becomes significant in many countries, the reliable long-term operation of desalination infrastructure becomes paramount. As it is not realistic to build desalination systems with components that never fail, instead the system should be designed with more resilience. To answer the question how resilient the system should be, we present in this paper a quantitative approach to measure system resilience using semi-Markov models. This approach allows to probabilistically represent the resilience of a desalination system, considering the functional or failed states of its components, as well as the probability of failure and repair rates. As the desalination plants are connected with the end-user through water transportation and distribution networks, this approach also enables an evaluation of various network configurations and resilience strategies. A case study addressing a segment of the water system in Saudi Arabia is given with the results, benefits, and limitations of the technique discussed.Center for Complex Engineering Systems at MIT and KACSTUnited States. National Aeronautics and Space Administration (Space Technology Research Fellowship, grant number NNX14AM42H

Ultrasonic Characterization of Porosity in Composites

The determination of levels of porosity is important in the engineering uses of graphite fiber/polymer matrix composites, since the interlaminar shear strength can be greatly reduced by excessive porosity [1]. Research in making nondestructive evaluations using ultrasonics as the probing energy has taken many directions. Hsu [2] has successfully modeled the frequency dependent attenuation to predict porosity levels in composites. Kline [3] has extended the work of Hashsin and Rosen [4] to determine the porosity and fiber volume fraction of composites by solving for the elastic coefficients of the composite structure. The propagation of leaky Lamb waves [5] has also been used to model porosity levels

"Open Innovation" and "Triple Helix" Models of Innovation: Can Synergy in Innovation Systems Be Measured?

The model of "Open Innovations" (OI) can be compared with the "Triple Helix of University-Industry-Government Relations" (TH) as attempts to find surplus value in bringing industrial innovation closer to public R&D. Whereas the firm is central in the model of OI, the TH adds multi-centeredness: in addition to firms, universities and (e.g., regional) governments can take leading roles in innovation eco-systems. In addition to the (transversal) technology transfer at each moment of time, one can focus on the dynamics in the feedback loops. Under specifiable conditions, feedback loops can be turned into feedforward ones that drive innovation eco-systems towards self-organization and the auto-catalytic generation of new options. The generation of options can be more important than historical realizations ("best practices") for the longer-term viability of knowledge-based innovation systems. A system without sufficient options, for example, is locked-in. The generation of redundancy -- the Triple Helix indicator -- can be used as a measure of unrealized but technologically feasible options given a historical configuration. Different coordination mechanisms (markets, policies, knowledge) provide different perspectives on the same information and thus generate redundancy. Increased redundancy not only stimulates innovation in an eco-system by reducing the prevailing uncertainty; it also enhances the synergy in and innovativeness of an innovation system.Comment: Journal of Open Innovations: Technology, Market and Complexity, 2(1) (2016) 1-12; doi:10.1186/s40852-016-0039-

Ears of the Armadillo: Global Health Research and Neglected Diseases in Texas

Neglected tropical diseases (NTDs) have\ud been recently identified as significant public\ud health problems in Texas and elsewhere in\ud the American South. A one-day forum on the\ud landscape of research and development and\ud the hidden burden of NTDs in Texas\ud explored the next steps to coordinate advocacy,\ud public health, and research into a\ud cogent health policy framework for the\ud American NTDs. It also highlighted how\ud U.S.-funded global health research can serve\ud to combat these health disparities in the\ud United States, in addition to benefiting\ud communities abroad

Improving Human Plateaued Motor Skill with Somatic Stimulation

Procedural motor learning includes a period when no substantial gain in performance improvement is obtained even with repeated, daily practice. Prompted by the potential benefit of high-frequency transcutaneous electrical stimulation, we examined if the stimulation to the hand reduces redundant motor activity that likely exists in an acquired hand motor skill, so as to further upgrade stable motor performance. Healthy participants were trained until their motor performance of continuously rotating two balls in the palm of their right hand became stable. In the series of experiments, they repeated a trial performing this cyclic rotation as many times as possible in 15 s. In trials where we applied the stimulation to the relaxed thumb before they initiated the task, most reported that their movements became smoother and they could perform the movements at a higher cycle compared to the control trials. This was not possible when the dorsal side of the wrist was stimulated. The performance improvement was associated with reduction of amplitude of finger displacement, which was consistently observed irrespective of the task demands. Importantly, this kinematic change occurred without being noticed by the participants, and their intentional changes of motor strategies (reducing amplitude of finger displacement) never improved the performance. Moreover, the performance never spontaneously improved during one-week training without stimulation, whereas the improvement in association with stimulation was consistently observed across days during training on another week combined with the stimulation. The improved effect obtained in stimulation trials on one day partially carried over to the next day, thereby promoting daily improvement of plateaued performance, which could not be unlocked by the first-week intensive training. This study demonstrated the possibility of effectively improving a plateaued motor skill, and pre-movement somatic stimulation driving this behavioral change

Can vaccinia virus be replaced by MVA virus for testing virucidal activity of chemical disinfectants?

Background: Vaccinia virus strain Lister Elstree (VACV) is a test virus in the DVV/RKI guidelines as representative of the stable enveloped viruses. Since the potential risk of laboratory-acquired infections with VACV persists and since the adverse effects of vaccination with VACV are described, the replacement of VACV by the modified vaccinia Ankara strain (MVA) was studied by testing the activity of different chemical biocides in three German laboratories. Methods: The inactivating properties of different chemical biocides (peracetic acid, aldehydes and alcohols) were tested in a quantitative suspension test according to the DVV/RKI guideline. All tests were performed with a protein load of 10% fetal calf serum with both viruses in parallel using different concentrations and contact times. Residual virus was determined by endpoint dilution method. Results: The chemical biocides exhibited similar virucidal activity against VACV and MVA. In three cases intra-laboratory differences were determined between VACV and MVA - 40% (v/v) ethanol and 30% (v/v) isopropanol are more active against MVA, whereas MVA seems more stable than VACV when testing with 0.05% glutardialdehyde. Test accuracy across the three participating laboratories was high. Remarkably inter-laboratory differences in the reduction factor were only observed in two cases. Conclusions: Our data provide valuable information for the replacement of VACV by MVA for testing chemical biocides and disinfectants. Because MVA does not replicate in humans this would eliminate the potential risk of inadvertent inoculation with vaccinia virus and disease in non-vaccinated laboratory workers

Small business owners' health and safety intentions: A cross-sectional survey

BACKGROUND: Little is known about the variables underlying small business owners' behavioural intentions toward workplace health and safety. This project explores the relationship between three mediating variables (Attitude Toward Safety, Subjective Norm and Perceived Behavioural Control) and owners' Intentions Toward Safety, following the Theory of Planned Behaviour. We also investigate the role of beliefs underlying each mediating variable. METHODS: Seven hundred businesses (5–50 employees) were randomly selected from 4084 eligible companies in a manufacturing business database (SIC codes 24 to 39). The 348 respondents are on average 51 yrs of age, 86% male, 96% white and have 2 to 4 years of post-secondary school. RESULTS: All three mediator variables are significantly correlated with Intentions Toward Safety; Attitude Toward Safety shows the strongest correlation, which is confirmed by path analysis. Owners with higher attitudes toward safety have a higher probability of believing that improving workplace health and safety will make employees' healthier and happier, show that they care, increase employee productivity, lower workers' compensation costs, increase product quality and lower costs. CONCLUSION: These results suggest that interventions aimed at increasing owners' health and safety intentions (and thus, behaviours) should focus on demonstrating positive employee health and product quality outcomes