2,263 research outputs found
The three-dimensional easy morphological (3-DEMO) classification of scoliosis – Part III, correlation with clinical classification and parameters
BACKGROUND: In the first part of this study we proposed a new classification approach for spinal deformities (3-DEMO classification). To be valid, a classification needs to describe adequately the phenomenon considered (construct validity): a way to verify this issue is comparison with already existing classifications (concurrent and criterion validity). AIM: To compare the 3-DEMO classification and the numerical results of its classificatory parameters with the existing clinical classifications and the Cobb degrees on the frontal and sagittal planes respectively. METHODS: 118 subjects (96 females) with adolescent idiopathic scoliosis (age 15.9 ± 3.1, 37.4 ± 12.5° Cobb) have been classified according to 3-DEMO, SRS-Ponseti, King and Lenke classifications as well as according to sagittal configuration. For all patients we computed the values of the 3-DEMO parameters and the classical Cobb degrees measurements in the frontal and sagittal planes. Statistical analysis comprised Chi Square and Regression analysis, including a multivariate stepwise regression. RESULTS: Three of the four 3-DEMO parameters (Direction, Sagittal and Frontal Shift) correlated with SRS-Ponseti, King and sagittal configuration classifications, but not with Lenke's one. Feeble correlations have been found among numerical parameters, while the stepwise regression allowed us to develop almost satisfactory models to obtain 3-DEMO parameters from classical Cobb degrees measurements. DISCUSSION: These results support the hypothesis of a possible clinical significance of the 3-DEMO classification, even if follow-up studies are needed to better understand these possible correlations and ultimately the classification usefulness. The most interesting 3D parameters appear to be Direction and mainly Phase, the latter being not at all correlated with currently existing classifications. Nevertheless, Shift cannot be easily appreciated on classical frontal and sagittal radiographs, even if it could presumably be calculated
Caffeine intake during pregnancy and adverse birth outcomes: a systematic review and dose–response meta-analysis
Caffeine is commonly consumed during pregnancy, crosses the placenta, with fetal serum concentrations similar to the mother’s, but studies of birth outcome show conflicting findings. We systematically searched Medline and Embase for relevant publications. We conducted meta-analysis of dose–response curves for associations between caffeine intake and spontaneous abortion, stillbirth, preterm delivery, low birth weight and small for gestational age (SGA) infants. Meta-analyses included 60 unique publications from 53 cohort and case–control studies. An increment of 100 g caffeine was associated with a 14 % (95 % CI 10–19 %) increase in risk of spontaneous abortion, 19 % (5–35 %) stillbirth, 2 % (-2 to 6 %) preterm delivery, 7 % (1–12 %) low birth weight, and 10 % (95 % CI 6–14 %) SGA. There was substantial heterogeneity in all models, partly explained by adjustment for smoking and previous obstetric history, but not by prospective assessment of caffeine intake. There was evidence of small-study effects such as publication bias. Greater caffeine intake is associated with an increase in spontaneous abortion, stillbirth, low birth weight, and SGA, but not preterm delivery. There is no identifiable threshold below which the associations are not apparent, but the size of the associations are generally modest within the range of usual intake and are potentially explained by bias in study design or publication. There is therefore insufficient evidence to support further reductions in the maximum recommended intake of caffeine, but maintenance of current recommendations is a wise precaution
Controlled synthesis of SPION@SiOâ‚‚ nanoparticles using design of experiments
The synthesis of single-core superparamagnetic iron oxide nanoparticles (SPIONs) coated with a silica shell of controlled thickness remains a challenge, due to the dependence on a multitude of experimental variables. Herein, we utilise design of experiment (DoE) to study the formation of SPION@SiO2 nanoparticles (NPs) via reverse microemulsion. Using a 33 full factorial design, the influence of reactant concentration of tetraethyl orthosilicate (TEOS) and ammonium hydroxide (NH4OH), as well as the number of fractionated additions of TEOS on the silica shell was investigated with the aim of minimising polydispersity and increasing the population of SPION@SiO2 NPs formed. This investigation facilitated a reproducible and controlled approach for the high yield synthesis of SPION@SiO2 NPs with uniform silica shell thickness. Application of a multiple linear regression analysis established a relationship between the applied experimental variables and the resulting silica shell thickness. These experimental variables were similarly found to dictate the monodispersity of the SPION@SiO2 NPs formed. The overall population of single-core@shell particles was dependent on the interaction between the number of moles of TEOS and NH4OH, with no influence from the number of fractionated additions of TEOS. This work demonstrates the complexity of the preparative method and produces an accessible and flexible synthetic model to achieve monodisperse SPION@SiO2 NPs with controllable shell thickness
In vivo protein-DNA interactions in a glucocorticoid response element require the presence of the hormone
Use of Site-Specifically Tethered Chemical Nucleases to Study Macromolecular Reactions
During a complex macromolecular reaction multiple changes in molecular conformation and interactions with ligands may occur. X-ray crystallography may provide only a limited set of snapshots of these changes. Solution methods can augment such structural information to provide a more complete picture of a macromolecular reaction. We analyzed the changes in protein conformation and protein:nucleic acid interactions which occur during transcription initiation by using a chemical nuclease tethered to cysteines introduced site-specifically into the RNA polymerase of bacteriophage T7 (T7 RNAP). Changes in cleavage patterns as the polymerase steps through transcription reveal a series of structural transitions which mediate transcription initiation. Cleavage by tethered chemical nucleases is seen to be a powerful method for revealing the conformational dynamics of macromolecular reactions, and has certain advantages over cross-linking or energy transfer approaches
A specific scoliosis classification correlating with brace treatment: description and reliability
<p>Abstract</p> <p>Background</p> <p>Spinal classification systems for scoliosis which were developed to correlate with surgical treatment historically have been used in brace treatment as well. Previously, there had not been a scoliosis classification system developed specifically to correlate with brace design and treatment. The purpose of this study is to show the intra- and inter- observer reliability of a new scoliosis classification system correlating with brace treatment.</p> <p>Methods</p> <p>An original classification system ("Rigo Classification") was developed in order to define specific principles of correction required for efficacious brace design and fabrication. The classification includes radiological as well as clinical criteria. The radiological criteria are utilized to differentiate five basic types of curvatures including: (I) imbalanced thoracic (or three curves pattern), (II) true double (or four curve pattern), (III) balanced thoracic and false double (non 3 non 4), (IV) single lumbar and (V) single thoracolumbar. In addition to the radiological criteria, the Rigo Classification incorporates the curve pattern according to SRS terminology, the balance/imbalance at the transitional point, and L4-5 counter-tilting. To test the intra-and inter-observer reliability of the Rigo Classification, three observers (1 MD, 1 PT and 1 CPO) measured (and one of them, the MD, re-measured) 51 AP radiographs including all curvature types.</p> <p>Results</p> <p>The intra-observer Kappa value was 0.87 (acceptance >0.70). The inter-observer Kappa values fluctuated from 0.61 to 0.81 with an average of 0.71 (acceptance > 0.70).</p> <p>Conclusions</p> <p>A specific scoliosis classification which correlates with brace treatment has been proposed with an acceptable intra-and inter-observer reliability.</p
Predictability of the spontaneous lumbar curve correction after selective thoracic fusion in idiopathic scoliosis
In this study we tried to achieve a better understanding of the biodynamic mechanism of balance in the scoliotic spine. Therefore we focused on the pre- and postoperative spine of patients with idiopathic scoliosis with a primary thoracic curve and a secondary lumbar curve. Several studies showed that the lumbar curve spontaneously corrects and improves after selective thoracic fusion. We try to understand and describe this spontaneous compensatory lumbar curve correction after selective thoracic correction and fusion. We performed a retrospective examination of pre- and postoperative radiographs of the spine of 38 patients with idiopathic scoliosis King type II and III. Frontal Cobb angles of the thoracic and lumbar curves were assessed on pre- and postoperative antero-posterior and side bending radiographs. We determined the postoperative corrections of the thoracic and lumbar curves. Relative (%) corrections and correlations of the postoperative corrections were calculated. The group was divided in three subgroups, depending on lumbar curve modifier, according to Lenkes classification system. The calculations were done for the whole group as for each subgroup. As expected, significant correlations were present between the relative correction of the main thoracic and the lumbar curve (mean RÂ =Â 0.590; PÂ =Â 0.001). The relation between relative thoracic and lumbar correction decreased with the lumbar modifier type. This study shows a highly significant correlation between the relative corrections of the main thoracic curve and the lumbar curve after selective thoracic fusion in idiopathic scoliosis. This correlation depends on lumbar curve modifier type. This new classification system seems to be of great predictable value for the spontaneous correction of the lumbar curve. Depending on the curve-type, a different technique for predicting the outcome should be used. The lumbar curve correction does not occur throughout the whole lumbar curve. Most correction is achieved in the upper part of the curve. The distal lumbar curve seems to be more rigid and less important in the spontaneous curve correction
Recommended from our members
Agricultural fires in the southeastern US during SEAC(4)RS: Emissions of trace gases and particles and evolution of ozone, reactive nitrogen, and organic aerosol
Recommended from our members
Airborne measurements of western U.S. wildfire emissions: Comparison with prescribed burning and air quality implications
Wildfires emit significant amounts of pollutants that degrade air quality. Plumes from three wildfires in the western U.S. were measured from aircraft during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) and the Biomass Burning Observation Project (BBOP), both in summer 2013. This study reports an extensive set of emission factors (EFs) for over 80 gases and 5 components of submicron particulate matter (PM1) from these temperate wildfires. These include rarely, or never before, measured oxygenated volatile organic compounds and multifunctional organic nitrates. The observed EFs are compared with previous measurements of temperate wildfires, boreal forest fires, and temperate prescribed fires. The wildfires emitted high amounts of PM1 (with organic aerosol (OA) dominating the mass) with an average EF that is more than 2 times the EFs for prescribed fires. The measured EFs were used to estimate the annual wildfire emissions of carbon monoxide, nitrogen oxides, total nonmethane organic compounds, and PM1 from 11 western U.S. states. The estimated gas emissions are generally comparable with the 2011 National Emissions Inventory (NEI). However, our PM1 emission estimate (1530 ± 570 Gg yr-1) is over 3 times that of the NEI PM2.5 estimate and is also higher thanthe PM2.5 emitted from all other sources in these states in the NEI. This study indicates that the source of OA from biomass burning in the western states is significantly underestimated. In addition, our results indicate that prescribed burning may be an effective method to reduce fine particle emissions
- …