36 research outputs found
Optical elements based on silicon photonics
Silicon photonics is gaining substantial impulse because it permits optical devices to be realized inexpensively using standard semiconductor fabrication techniques and integrated with microelectronic chips. In this paper, we designed few optical elements such as optical power splitter, polarization beam splitter and Bragg grating based on silicon platform simulated using finite element method.This work was financially supported by the Russian Foundation for Basic Research (grant No. 16-29-09528_ofi_m) for numerical calculations, by the Ministry of Science and Higher Education within the State assignment FSRC "Crystallography and Photonics" RAS (No. 007-GZ/Ch3363/26) for theoretical results
Asymmetric apodization for the comma aberrated point spread function
This paper deals with the study of light flux distributions in the point spread function formed by an optical system with a one-dimensional aperture under the influence of the coma aberration. The traditional design of an asymmetric optical filter improves the resolution of a diffraction-limited optical imaging system. In this approach we explore the control of monochromatic aberrations through pupil engineering with asymmetric apodization. This technique employs the amplitude and phase apodization for the mitigation of the effects of third-order aberrations on the diffracted image. On introducing the coma wave aberration effect, the central peak intensity in the field of diffraction is a function of the edge strips width and the amplitude apodization parameter of a one-dimensional pupil filter, whereas the magnitude of the reduction of optical side-lobes is a function of the degree of phase apodization at the periphery of the aperture. The analytically computed results are illustrated graphically in terms of point spread function curves under various considerations of the coma aberrations and a different degree of amplitude and phase apodization. Hence, for the optimum values of apodization, the axial resolution has been analyzed using well-defined quality criteria.This work was partially financially supported by Ministry of Education and Science of Russian Federation and Russian Foundation for Basic Research (RFBR) (16-29-11698, 16-29-11744)
Modeling of a multilayer dielectric stack Notch filter for visible spectrum
In this work, a multilayer dielectric optical notch filters design for visible spectrum 450-700 nm is proposed based on TiO2 and SiO2 alternating layers. Titanium dioxide (TiO2) is selected for its high refractive index value (2.5) and Silicon dioxide (SiO2) as a low refractive index layer (1.45). These filters are conventionally anticipated for overpowering of powerful laser beams in research experiments, to obtain good signal-to-noise ratios in Raman laser spectroscopy. The designed filter shows a high quality with average transmission of more than 90% in 450-535 and 587-700 nm wavelength ranges. And a stop band region between 536-586 nm with a FWHM of 50 nm shows a transmission of 3% with an optical density of greater than 3, which makes it a promising element to be used as notch filter.This work was supported by the Ministry of Education and Science of the Russian Federation and the Russian Foundation for Basic Research (grant No. 16-47-630546)
Conditions of a single-mode rib channel waveguide based on dielectric TiO2/SiO2
In this paper, we propose conditions for the design of a single-mode rib channel waveguide based on dielectric materials such as titanium dioxide (TiO2) and silicon dioxide (SiO2) for the 0.633-Β΅m visible light. We also design Y-splitter structures, which show high-degree optical confinement and low bend losses at various radii of curvatures. Small radii of curvatures are extremely desirable in integrated photonics as they permit decreasing the dimensions but can also potentially reduce power consumption in the active devices.The work was partially funded by the RF Ministry of Education and Science (# SP-4375.2016.5), a RF President's grant for support of leading scientific schools (# NSh-9498.2016.9) and RFBR (##17-47-630420, 17-47-630417, 16-47-630483, 15-07-01174)
A compact design of a balanced 1Γ4 optical power splitter based on silicon on insulator slot waveguides
In this paper, a compact design of a balanced 1Γ4 optical power splitter based on coupled mode theory (CMT) is presented. The design consists of seven vertically slotted waveguides based on the silicon-on-insulator platform. The 1Γ4 OPS is modelled using commercial finite element method (FEM) simulation tool COMSOL Multiphysics 5.1. The optimized OPS is capable of working across the whole C-band with maximum ~39 % of power decay in the wavelength range 1530 β 1565 nm.This work was partially financially supported by Ministry of Education and Science of Russian Federation, Russian Foundation for Basic Research (RFBR) (16-47-630677, 16-29-11744) and by the Federal Agency for Scientific Organizations (agreement No. 007-G7/C3363/26)
Modeling of a Cold mirror based on TiO2/MgF2 and TiO2/SiO2 at 45o angle of incidence
In this paper, a modeling of a multilayer dielectric cold mirror based on TiO2/SiO2 and TiO2/MgF2 alternating layers is presented. A cold mirror is a specific dielectric mirror that reflects the complete visible light spectrum whereas transmitting the infrared wavelengths. These mirrors are designed for an incident angle of 45o, and are modeled with multilayer dielectric coatings similar to interference filters. Our designed mirror based on TiO2/SiO2 shows an average transmission of less than 5% in spectrum range of 425-610 nm whereas it has an average transmission of 95% in the spectrum range of 710-1500 nm.This work was supported by the Ministry of Education and Science of the Russian Federation and the Russian Foundation for Basic Research (grants No. 16-07-00825, 16-26-11698-ofi_m)
Cell counting optical planar waveguide sensor based on (Yb,Nb):RTP/RTP(001) system
In this work, we demonstrated metal tagged cell counting based on planar waveguide with the help of a visible light at 633 nm with TM polarization and calculated the output power in relation with the density of cells placed on the waveguide
Properties of off-axis caustics of autofocusing chirp beams
Π Π΄Π°Π½Π½ΠΎΠΉ ΡΡΠ°ΡΡΠ΅ ΡΠ΅ΠΎΡΠ΅ΡΠΈΡΠ΅ΡΠΊΠΈ ΠΈ ΡΠΈΡΠ»Π΅Π½Π½ΠΎ ΠΈΡΡΠ»Π΅Π΄ΡΡΡΡΡ Π°Π²ΡΠΎΡΠΎΠΊΡΡΠΈΡΡΡΡΠΈΠ΅ ΡΠ²ΠΎΠΉΡΡΠ²Π° ΡΠΈΡΠΏ-ΠΏΡΡΠΊΠΎΠ² Ρ ΠΏΡΠΎΠΈΠ·Π²ΠΎΠ»ΡΠ½ΠΎΠΉ ΡΡΠ΅ΠΏΠ΅Π½Π½ΠΎΠΉ Π·Π°Π²ΠΈΡΠΈΠΌΠΎΡΡΡΡ ΠΎΡ ΡΠ°Π΄ΠΈΡΡΠ°. Π Π°ΡΡΠΌΠΎΡΡΠ΅Π½Ρ Π΄Π²ΡΡ
- ΠΈ ΡΡΡΡ
ΠΏΠ°ΡΠ°ΠΌΠ΅ΡΡΠΈΡΠ΅ΡΠΊΠΈΠ΅ ΡΠΈΡΠΏ-ΠΏΡΡΠΊΠΈ, Π²Π°ΡΠΈΠ°ΡΠΈΠΈ ΠΏΠ°ΡΠ°ΠΌΠ΅ΡΡΠΎΠ² ΠΊΠΎΡΠΎΡΡΡ
ΠΏΠΎΠ·Π²ΠΎΠ»ΡΡΡ ΡΡΡΠ΅ΠΊΡΠΈΠ²Π½ΠΎ ΡΠΏΡΠ°Π²Π»ΡΡΡ Π°Π²ΡΠΎΡΠΎΠΊΡΡΠΈΡΡΡΡΠΈΠΌΠΈ ΡΠ²ΠΎΠΉΡΡΠ²Π°ΠΌΠΈ. ΠΠΎΠ»ΡΡΠ΅Π½Π½ΡΠ΅ ΡΠ΅Π·ΡΠ»ΡΡΠ°ΡΡ ΠΎΠ±Π»Π°Π΄Π°ΡΡ ΠΏΠΎΡΠ΅Π½ΡΠΈΠ°-Π»ΠΎΠΌ Π΄Π»Ρ ΡΠ°Π·Π»ΠΈΡΠ½ΡΡ
ΠΏΡΠΈΠ»ΠΎΠΆΠ΅Π½ΠΈΠΉ Π² ΠΎΠΏΡΠΈΠΊΠ΅ ΠΈ ΡΠΎΡΠΎΠ½ΠΈΠΊΠ΅.
Autofocusing properties of chirp beams with an arbitrary power-law dependence on the radiusare studied theoretically and numerically. Two- and three-parameter chirp beams are considered, the parameter variations of which make it possible to effectively control their autofocusing properties. The results obtained have a potential for various applications in optics and photonics.Π Π°Π±ΠΎΡΠ° Π²ΡΠΏΠΎΠ»Π½Π΅Π½Π° ΠΏΡΠΈ ΠΏΠΎΠ΄Π΄Π΅ΡΠΆΠΊΠ΅ Π³ΡΠ°Π½ΡΠ° Π Π€Π€Π β 20-07-00505 Π² ΡΠ΅ΠΎΡΠ΅ΡΠΈΡΠ΅ΡΠΊΠΎΠΉ ΡΠ°ΡΡΠΈ ΠΈ ΠΠΈΠ½ΠΈΡΡΠ΅ΡΡΡΠ²Π° Π½Π°ΡΠΊΠΈ ΠΈ Π²ΡΡΡΠ΅Π³ΠΎ ΠΎΠ±ΡΠ°Π·ΠΎΠ²Π°Π½ΠΈΡ Π Π€ Π² ΡΠ°ΠΌΠΊΠ°Ρ
Π²ΡΠΏΠΎΠ»Π½Π΅Π½ΠΈΡ ΡΠ°Π±ΠΎΡ ΠΏΠΎ ΠΠΎΡΡΠ΄Π°ΡΡΡΠ²Π΅Π½Π½ΠΎΠΌΡ Π·Π°Π΄Π°Π½ΠΈΡ Π€ΠΠΠ¦ Β«ΠΡΠΈΡΡΠ°Π»Π»ΠΎΠ³ΡΠ°ΡΠΈΡ ΠΈ ΡΠΎΡΠΎΠ½ΠΈΠΊΠ°Β» Π ΠΠ (ΡΠΎΠ³Π»Π°ΡΠ΅Π½ΠΈΠ΅ β 007-ΠΠ/Π§3363/26) Π² ΡΠ°ΡΡΠΈ ΡΠΈΡΠ»Π΅Π½Π½ΠΎΠ³ΠΎ ΠΌΠΎΠ΄Π΅Π»ΠΈΡΠΎΠ²Π°Π½ΠΈΡ
Thermal effect on the optical and morphological properties of TiO2 thin films obtained by annealing Ti metal layer
Titanium metal layers of different thicknesses were deposited on optical glass, quartz and ceramic substrates at 50Β°C and 150Β°C substrate temperature with the help of magnetron deposition. Metal layers were converted into rutile phase of TiO2 at different annealing temperatures. The effect of thermal annealing on the morphology and refractive index of the thin film was investigated