1,058 research outputs found
COSSAP simulation model of DS-CDMA indoor microwave ATM LAN
This thesis presents an original work in the area of designing and implementing a simulation testbed for modelling a high speed spread spectrum Asynchronous Transfer Mode (ATM) Local Area Network (LAN). The spread spectrum technique used in this LAN model is Direct Sequence Code Division Multiple Access (DS-CDMA). The simulation model includes at least a physical layer of such a LAN, embedded into the COSSAP1 simulation environment, and has been fully tested. All the newly developed building blocks are comprised of standard blocks from the COSSAP libraries or compatible user-built primitive blocks (only where it is absolutely necessary), and are flexible enough to allow the modification of simulation or model parameters; such as the number of signal channels, modulation method used, different spreading code sequences and so on. All these changes can be made with minimal effort. Another significant contribution made in this thesis is the extended research into evaluating the Bit Error Rate (BER) performance of different spread spectrum COMA coding schemes for an indoor microwave A1M LAN [8]. Different spread spectrum CDMA coding schemes are compared for their transmission error rate in Additive White Gaussian Noise (AWGN) channel with varying transmitted signal power and at different channel Signal to Noise Ratio (SNR) levels. Since a wireless microwave channel is very prone to transmission errors, a major contribution of the simulation testbed developed in this thesis is its use in the finding of an optimal physical layer transmission scheme with the best Bit Error Rate (BER) performance in an indoor environment
The Cuba Library
Concepts and implementation of the Cuba library for multidimensional
numerical integration are elucidated.Comment: 6 pages. Talk given at the X International Workshop on Advanced
Computing and Analysis Techniques in Physics Research, ACAT 2005,
DESY-Zeuthen, Germany, 22-27 May 200
Nanoantenna-Microcavity Hybrids with Highly Cooperative Plasmonic-Photonic Coupling
Nanoantennas offer the ultimate spatial control over light by concentrating
optical energy well below the diffraction limit, whereas their quality factor
(Q) is constrained by large radiative and dissipative losses. Dielectric
microcavities, on the other hand, are capable of generating a high Q-factor
through an extended photon storage time but have a diffraction-limited optical
mode volume. Here we bridge the two worlds, by studying an exemplary hybrid
system integrating plasmonic gold nanorods acting as nanoantennas with an
on-resonance dielectric photonic crystal (PC) slab acting as a low-loss
microcavity and, more importantly, by synergistically combining their
advantages to produce a much stronger local field enhancement than that of the
separate entities. To achieve this synergy between the two polar opposite types
of nanophotonic resonant elements, we show that it is crucial to coordinate
both the dissipative loss of the nanoantenna and the Q-factor of the low-loss
cavity. In comparison to the antenna-cavity coupling approach using a
Fabry-Perot resonator, which has proved successful for resonant amplification
of the antenna's local field intensity, we theoretically and experimentally
show that coupling to a modest-Q PC guided resonance can produce a greater
amplification by at least an order of magnitude. The synergistic
nanoantenna-microcavity hybrid strategy opens new opportunities for further
enhancing nanoscale light-matter interactions to benefit numerous areas such as
nonlinear optics, nanolasers, plasmonic hot carrier technology, and
surface-enhanced Raman and infrared absorption spectroscopies.Comment: Revised version after acceptanc
Pervasive 2D Barcodes for Camera Phone Applications
In a previous study, we evaluated six 2D barcodes using eight criteria for standardization potential: omnidirectional symbol reading, support for low-resolution cameras, reading robustness under different lighting conditions, barcode reading distance, error correction capability, security, support for multiple character sets, and data capacity. We also considered the fidelity of the camera phone\u27s captured image as a metric for gauging reading reliability. Here, we review the six 2D barcodes and then use an additional metric - a first-read rate - to quantitatively verify our earlier results and better gauge reading reliability
The Use of Border in Colour 2D Barcode
In recent years, a trend has emerged in the use of colour to increase the data capacity of the 2D barcode. However the decoding of such colour barcode can be challenging in a mobile environment due to blurring effect that is commonly found in images captured by camera mobile phone. Blurring affects the synchronisation between the cells. It also causes the colour value of the cell to be wrongly interpreted. Hence, this paper proposes the use of border to improve the synchronisation and decoding. Three different types of border and the choice of its width will be investigated
Recommended from our members
Development Of A Novel Finder Pattern For Effective Color 2D-Barcode Detection
With a camera mobile phone, which has become a must-have device, 2D-barcode works as an interface to bridge the physical and digital world. As the notion of ubiquitous computing has permeated, developing a new 2D-barcode and its applications has been a growing trend worldwide. A 2D-barcode symbol consists of two broad areas: data area and guide area. The components of the latter is collectively called finder pattern and used in locating the 2D-barcode symbol. The failure of finding the target symbol prevents a barcode reader from successfully decoding the barcode. Hence, designing a functional finder pattern is one of the key for improving the robustness of barcode reading, and thus, the entire 2D-barcode system. We have designed a novel finder pattern integrated with a color 2D-barcode for camera mobile phone applications. Through the development and evaluation of the finder pattern for effective color 2D-barcode detection, this paper discusses keys to improve the functionality and reliability of finder patterns, which should be kept in mind when designing a finder pattern for any 2D-barcode symbol
Improved quark mass density- dependent model with quark-sigma meson and quark-omega meson couplings
An improved quark mass density- dependent model with the non-linear scalar
sigma field and the -meson field is presented. We show that the present
model can describe saturation properties, the equation of state, the
compressibility and the effective nuclear mass of nuclear matter under mean
field approximation successfully. The comparison of the present model and the
quark-meson coupling model is addressed.Comment: 15 pages, 6 figure
Nuclear matter and neutron matter for improved quark mass density- dependent model with mesons
A new improved quark mass density-dependent model including u, d quarks,
mesons, mesons and mesons is presented. Employing this
model, the properties of nuclear matter, neutron matter and neutron star are
studied. We find that it can describe above properties successfully. The
results given by the new improved quark mass density- dependent model and by
the quark meson coupling model are compared.Comment: 18 pages, 7 figure
Soliton solutions of the improved quark mass density-dependent model at finite temperature
The improved quark mass density-dependent model (IQMDD) based on soliton bag
model is studied at finite temperature. Appling the finite temperature field
theory, the effective potential of the IQMDD model and the bag constant
have been calculated at different temperatures. It is shown that there is a
critical temperature . We also calculate the
soliton solutions of the IQMDD model at finite tmperature. It turns out that
when , there is a bag constant and the soliton solutions are
stable. However, when the bag constant and there is no
soliton solution, therefore, the confinement of quarks are removed quickly.Comment: 10 pages, 9 figures; Version to appear in Physical Review
- …