10,899 research outputs found
In-home and remote use of robotic body surrogates by people with profound motor deficits
By controlling robots comparable to the human body, people with profound
motor deficits could potentially perform a variety of physical tasks for
themselves, improving their quality of life. The extent to which this is
achievable has been unclear due to the lack of suitable interfaces by which to
control robotic body surrogates and a dearth of studies involving substantial
numbers of people with profound motor deficits. We developed a novel, web-based
augmented reality interface that enables people with profound motor deficits to
remotely control a PR2 mobile manipulator from Willow Garage, which is a
human-scale, wheeled robot with two arms. We then conducted two studies to
investigate the use of robotic body surrogates. In the first study, 15 novice
users with profound motor deficits from across the United States controlled a
PR2 in Atlanta, GA to perform a modified Action Research Arm Test (ARAT) and a
simulated self-care task. Participants achieved clinically meaningful
improvements on the ARAT and 12 of 15 participants (80%) successfully completed
the simulated self-care task. Participants agreed that the robotic system was
easy to use, was useful, and would provide a meaningful improvement in their
lives. In the second study, one expert user with profound motor deficits had
free use of a PR2 in his home for seven days. He performed a variety of
self-care and household tasks, and also used the robot in novel ways. Taking
both studies together, our results suggest that people with profound motor
deficits can improve their quality of life using robotic body surrogates, and
that they can gain benefit with only low-level robot autonomy and without
invasive interfaces. However, methods to reduce the rate of errors and increase
operational speed merit further investigation.Comment: 43 Pages, 13 Figure
Deep Haptic Model Predictive Control for Robot-Assisted Dressing
Robot-assisted dressing offers an opportunity to benefit the lives of many
people with disabilities, such as some older adults. However, robots currently
lack common sense about the physical implications of their actions on people.
The physical implications of dressing are complicated by non-rigid garments,
which can result in a robot indirectly applying high forces to a person's body.
We present a deep recurrent model that, when given a proposed action by the
robot, predicts the forces a garment will apply to a person's body. We also
show that a robot can provide better dressing assistance by using this model
with model predictive control. The predictions made by our model only use
haptic and kinematic observations from the robot's end effector, which are
readily attainable. Collecting training data from real world physical
human-robot interaction can be time consuming, costly, and put people at risk.
Instead, we train our predictive model using data collected in an entirely
self-supervised fashion from a physics-based simulation. We evaluated our
approach with a PR2 robot that attempted to pull a hospital gown onto the arms
of 10 human participants. With a 0.2s prediction horizon, our controller
succeeded at high rates and lowered applied force while navigating the garment
around a persons fist and elbow without getting caught. Shorter prediction
horizons resulted in significantly reduced performance with the sleeve catching
on the participants' fists and elbows, demonstrating the value of our model's
predictions. These behaviors of mitigating catches emerged from our deep
predictive model and the controller objective function, which primarily
penalizes high forces.Comment: 8 pages, 12 figures, 1 table, 2018 IEEE International Conference on
Robotics and Automation (ICRA
Towards Assistive Feeding with a General-Purpose Mobile Manipulator
General-purpose mobile manipulators have the potential to serve as a
versatile form of assistive technology. However, their complexity creates
challenges, including the risk of being too difficult to use. We present a
proof-of-concept robotic system for assistive feeding that consists of a Willow
Garage PR2, a high-level web-based interface, and specialized autonomous
behaviors for scooping and feeding yogurt. As a step towards use by people with
disabilities, we evaluated our system with 5 able-bodied participants. All 5
successfully ate yogurt using the system and reported high rates of success for
the system's autonomous behaviors. Also, Henry Evans, a person with severe
quadriplegia, operated the system remotely to feed an able-bodied person. In
general, people who operated the system reported that it was easy to use,
including Henry. The feeding system also incorporates corrective actions
designed to be triggered either autonomously or by the user. In an offline
evaluation using data collected with the feeding system, a new version of our
multimodal anomaly detection system outperformed prior versions.Comment: This short 4-page paper was accepted and presented as a poster on
May. 16, 2016 in ICRA 2016 workshop on 'Human-Robot Interfaces for Enhanced
Physical Interactions' organized by Arash Ajoudani, Barkan Ugurlu, Panagiotis
Artemiadis, Jun Morimoto. It was peer reviewed by one reviewe
Multidimensional Capacitive Sensing for Robot-Assisted Dressing and Bathing
Robotic assistance presents an opportunity to benefit the lives of many
people with physical disabilities, yet accurately sensing the human body and
tracking human motion remain difficult for robots. We present a
multidimensional capacitive sensing technique that estimates the local pose of
a human limb in real time. A key benefit of this sensing method is that it can
sense the limb through opaque materials, including fabrics and wet cloth. Our
method uses a multielectrode capacitive sensor mounted to a robot's end
effector. A neural network model estimates the position of the closest point on
a person's limb and the orientation of the limb's central axis relative to the
sensor's frame of reference. These pose estimates enable the robot to move its
end effector with respect to the limb using feedback control. We demonstrate
that a PR2 robot can use this approach with a custom six electrode capacitive
sensor to assist with two activities of daily living-dressing and bathing. The
robot pulled the sleeve of a hospital gown onto able-bodied participants' right
arms, while tracking human motion. When assisting with bathing, the robot moved
a soft wet washcloth to follow the contours of able-bodied participants' limbs,
cleaning their surfaces. Overall, we found that multidimensional capacitive
sensing presents a promising approach for robots to sense and track the human
body during assistive tasks that require physical human-robot interaction.Comment: 8 pages, 16 figures, International Conference on Rehabilitation
Robotics 201
Focusing of Intense Subpicosecond Laser Pulses in Wedge Targets
Two dimensional particle-in-cell simulations characterizing the interaction
of ultraintense short pulse lasers in the range 10^{18} \leq I \leq 10^{20}
W/cm^{2} with converging target geometries are presented. Seeking to examine
intensity amplification in high-power laser systems, where focal spots are
typically non-diffraction limited, we describe key dynamical features as the
injected laser intensity and convergence angle of the target are systematically
varied. We find that laser pulses are focused down to a wavelength with the
peak intensity amplified by an order of magnitude beyond its vacuum value, and
develop a simple model for how the peak location moves back towards the
injection plane over time. This performance is sustained over hundreds of
femtoseconds and scales to laser intensities beyond 10^{20} W/cm^{2} at 1 \mu m
wavelength.Comment: 5 pages, 6 figures, accepted for publication in Physics of Plasma
Ratchet-like dynamics of fluxons in annular Josephson junctions driven by bi-harmonic microwave fields
Experimental observation of the unidirectional motion of a topological
soliton driven by a bi-harmonic ac force of zero mean is reported. The
observation is made by measuring the current-voltage characteristics for a
fluxon trapped in an annular Josephson junction that was placed into a
microwave field. The measured dependence of the fluxon mean velocity (rectified
voltage) at zero dc bias versus the phase shift between the first and second
harmonic of the driving force is in qualitative agreement with theoretical
expectations.Comment: 6 figure
The decay of Hill's vortex in a rotating flow
Hill's vortex is a classical solution of the incompressible Euler equations which consists of an axisymmetric spherical region of constant vorticity matched to an irrotational external flow. This solution has been shown to be a member of a one-parameter family of steady vortex rings and as such is commonly used as a simple analytic model for a vortex ring. Here, we model the decay of a Hill's vortex in a weakly rotating flow due to the radiation of inertial waves. We derive analytic results for the modification of the vortex structure by rotational effects and the generated wave field using an asymptotic approach where the rotation rate, or inverse Rossby number, is taken to be small. Using this model, we predict the decay of the vortex speed and radius by combining the flux of vortex energy to the wave field with the conservation of peak vorticity. We test our results against numerical simulations of the full axisymmetric NavierâStokes equations
The spectrum of small-scale density fluctuations in the solar wind
Interplanetary scintillation observations at frequencies between 74 and 1400 MHz and solar elongations in the range 10â90° are combined to determine the form of the wavenumber spectrum of electron density fluctuations in the range 10â»Âł < k < 10â»Âč/km (where k = 2Ï/λ). The data are best explained by a spectrum in which there is a genuine scale-length; they are not consistent with a simple power-law spectrum. This suggests that turbulence may be less important than some kind of plasma instability in generating small-scale density fluctuations. The relevance of these conclusions to the use of IPS for determining radio source structure is discussed
- âŠ