315 research outputs found

    Thermodynamic analysis and preliminary design of closed Brayton cycle using nitrogen as working fluid and coupled to small modular Sodium-cooled fast reactor (SM-SFR)

    Get PDF
    © 2017Sodium-cooled fast reactor (SFR) is considered the most promising of the Generation IV reactors for their near-term demonstration of power generation. Small modular SFRs (SM-SFRs) have less investment risk, can be deployed more quickly, are easier to operate and are more flexible in comparison to large nuclear reactor. Currently, SFRs use the proven Rankine steam cycle as the power conversion system. However, a key challenge is to prevent dangerous sodium-water reaction that could happen in SFR coupled to steam cycle. Nitrogen gas is inert and does not react with sodium. Hence, intercooled closed Brayton cycle (CBC) using nitrogen as working fluid and with a single shaft configuration has been one common power conversion system option for possible near-term demonstration of SFR. In this work, a new two shaft nitrogen CBC with parallel turbines was proposed to further simplify the design of the turbomachinery and reduce turbomachinery size without compromising the cycle efficiency. Furthermore, thermodynamic performance analysis and preliminary design of components were carried out in comparison with a reference single shaft nitrogen cycle. Mathematical models in Matlab were developed for steady state thermodynamic analysis of the cycles and for preliminary design of the heat exchangers, turbines and compressors. Studies were performed to investigate the impact of the recuperator minimum terminal temperature difference (TTD) on the overall cycle efficiency and recuperator size. The effect of turbomachinery efficiencies on the overall cycle efficiency was examined. The results showed that the cycle efficiency of the proposed configuration was comparable to the 39.44% efficiency of the reference cycle. In addition, the study indicated that the new configuration has the potential to simplify the design of turbomachinery, reduce the size of turbomachinery and provide opportunity for improving the efficiency of the turbomachinery. The findings so far revealed that the proposed two-shaft CBC with nitrogen as working fluid could be a promising power conversion system for SM-SFRs near-term demonstration

    PERFORMANCE OF A NOVEL HELIUM-STIRRED SOLID OXIDE FUEL CELL WITH MOLTEN METAL ANODE FOR ELECTRICITY GENERATION AND OXYGEN DISSOLUTION IN MOLTEN METAL

    Get PDF
     A novel helium-stirred solid oxide fuel cell (SOFC) with a molten metal anode for electricity generation and oxygen dissolution in a molten metal was investigated. This SOFC configuration employs conventional cathode and electrolyte but incorporates a molten metal contained in an alumina crucible as anode and inert gas stirring of the molten metal. Tin was the metal used in this study because it is non-toxic and inexpensive, it also has a relatively low melting point and very low vapour pressure at high temperatures. The performance of a SOFC with molten tin anode at 850 oC was evaluated by the techniques of electrochemical impedance spectroscopy, cyclic voltammetry and chronoamperometry. A peak power density of ca. 100 W m-2 at a potential difference of ca. 0.45 V and current density of ca. 222 A m-2 was achieved. Impedance spectra showed that ohmic potential losses controlled the reactor performance, with about 59% of those arising from the inherent difficulty in achieving a low resistance contact at the silver wire (silver wool) current collector | cathode interface. The molten metal bath provided a relatively large reservoir of molten metal for oxygen absorption and transport compared to a thin film of molten metal while gas stirring of molten metal enhanced the transport of dissolved oxygen atoms from the yttria stabilized zirconia (YSZ) electrolyte | molten metal interface to the bulk molten metal and assisted in preventing oxide formation at the YSZ electrolyte | molten metal interface.&nbsp

    Structural and magnetic properties of an InGaAs/Fe3_3Si superlattice in cylindrical geometry

    Full text link
    The structure and the magnetic properties of an InGaAs/Fe3Si superlattice in a cylindrical geometry are investigated by electron microscopy techniques, x-ray diffraction and magnetometry. To form a radial superlattice, a pseudomorphic InGaAs/Fe3As bilayer has been released from its substrate self-forming into a rolled-up microtube. Oxide-free interfaces as well as areas of crystalline bonding are observed and an overall lattice mismatch between succeeding layers is determined. The cylindrical symmetry of the final radial superlattice shows a significant effect on the magnetization behavior of the rolled-up layers

    Spitzer observations of Abell 1763 - I: infrared and optical photometry

    Get PDF
    We present a photometric analysis of the galaxy cluster Abell 1763 at visible and infrared wavelengths. Included are fully reduced images in r', J, H, and Ks obtained using the Palomar 200in telescope, as well as the IRAC and MIPS images from Spitzer. The cluster is covered out to approximately 3 virial radii with deep 24um imaging (a 5? depth of 0.2 mJy). This same field of 40' by 40' is covered in all four IRAC bands as well as the longer wavelength MIPS bands (70 and 160um). The r' imaging covers 0.8 deg2 down to 25.5 magnitudes, and overlaps with most of the MIPS field of view. The J, H, Ks images cover the cluster core and roughly half of the filament galaxies, which extend towards the neighboring cluster, Abell 1770. This first, in a series of papers on Abell 1763, discusses the data reduction methods and source extraction techniques used for each dataset. We present catalogs of infrared (IR) sources (with 24 and/or 70um emission) and their corresponding emission in the optical (u', g', r', i', z'), and Near- to Far-IR (J, H, Ks, IRAC, and MIPS 160um). We provide the catalogs and reduced images to the community through the NASA/IPAC Infrared Science Archive (IRSA).Comment: 25 pages, 16 figure

    Nulling interferometry: performance comparison between Antarctica and other ground-based sites

    Full text link
    Detecting the presence of circumstellar dust around nearby solar-type main sequence stars is an important pre-requisite for the design of future life-finding space missions such as ESA's Darwin or NASA's Terrestrial Planet Finder (TPF). The high Antarctic plateau may provide appropriate conditions to perform such a survey from the ground. We investigate the performance of a nulling interferometer optimised for the detection of exozodiacal discs at Dome C, on the high Antarctic plateau, and compare it to the expected performance of similar instruments at temperate sites. Based on the currently available measurements of the turbulence characteristics at Dome C, we adapt the GENIEsim software (Absil et al. 2006, A&A 448) to simulate the performance of a nulling interferometer on the high Antarctic plateau. To feed a realistic instrumental configuration into the simulator, we propose a conceptual design for ALADDIN, the Antarctic L-band Astrophysics Discovery Demonstrator for Interferometric Nulling. We assume that this instrument can be placed above the 30-m high boundary layer, where most of the atmospheric turbulence originates. We show that an optimised nulling interferometer operating on a pair of 1-m class telescopes located 30 m above the ground could achieve a better sensitivity than a similar instrument working with two 8-m class telescopes at a temperate site such as Cerro Paranal. The detection of circumstellar discs about 20 times as dense as our local zodiacal cloud seems within reach for typical Darwin/TPF targets in a integration time of a few hours. Moreover, the exceptional turbulence conditions significantly relax the requirements on real-time control loops, which has favourable consequences on the feasibility of the nulling instrument.Comment: 10 pages, accepted for publication in A&

    Two 'transitions': the political economy of Joyce Banda's rise to power and the related role of civil society organisations in Malawi

    Get PDF
    This is an Accepted Manuscript of an article published by Taylor & Francis in Review of African Political Economy on 21/07/2014, available online: http://www.tandfonline.com/doi/abs/10.1080/03056244.2014.90194

    Temporal trends in mode, site and stage of presentation with the introduction of colorectal cancer screening: a decade of experience from the West of Scotland

    Get PDF
    background:  Population colorectal cancer screening programmes have been introduced to reduce cancer-specific mortality through the detection of early-stage disease. The present study aimed to examine the impact of screening introduction in the West of Scotland. methods:  Data on all patients with a diagnosis of colorectal cancer between January 2003 and December 2012 were extracted from a prospectively maintained regional audit database. Changes in mode, site and stage of presentation before, during and after screening introduction were examined. results:  In a population of 2.4 million, over a 10-year period, 14 487 incident cases of colorectal cancer were noted. Of these, 7827 (54%) were males and 7727 (53%) were socioeconomically deprived. In the postscreening era, 18% were diagnosed via the screening programme. There was a reduction in both emergency presentation (20% prescreening vs 13% postscreening, P0.001) and the proportion of rectal cancers (34% prescreening vs 31% pos-screening, P0.001) over the timeframe. Within non-metastatic disease, an increase in the proportion of stage I tumours at diagnosis was noted (17% prescreening vs 28% postscreening, P0.001). conclusions:  Within non-metastatic disease, a shift towards earlier stage at diagnosis has accompanied the introduction of a national screening programme. Such a change should lead to improved outcomes in patients with colorectal cancer

    A near-infrared interferometric survey of debris disk stars. I. Probing the hot dust content around epsilon Eridani and tau Ceti with CHARA/FLUOR

    Full text link
    We probed the first 3AU around tau Ceti and epsilon Eridani with the CHARA array (Mt Wilson, USA) in order to gauge the 2micron excess flux emanating from possible hot dust grains in the debris disks and to also resolve the stellar photospheres. High precision visibility amplitude measurements were performed with the FLUOR single mode fiber instrument and telescope pairs on baselines ranging from 22 to 241m of projected length. The short baseline observations allow us to disentangle the contribution of an extended structure from the photospheric emission, while the long baselines constrain the stellar diameter. We have detected a resolved emission around tau Cet, corresponding to a spatially integrated, fractional excess flux of 0.98 +/- 0.21 x 10^{-2} with respect to the photospheric flux in the K'-band. Around eps Eri, our measurements can exclude a fractional excess of greater than 0.6x10^{-2} (3sigma). We interpret the photometric excess around tau Cet as a possible signature of hot grains in the inner debris disk and demonstrate that a faint, physical or background, companion can be safely excluded. In addition, we measured both stellar angular diameters with an unprecedented accuracy: Theta_LD(tau Cet)= 2.015 +/- 0.011 mas and Theta_LD(eps Eri)=2.126 +/- 0.014 mas.Comment: 8 pages, 5 figures, to appear in Astronomy and Astrophysic

    Hot exozodiacal dust resolved around Vega with IOTA/IONIC

    Get PDF
    Although debris discs have been detected around a significant number of main-sequence stars, only a few of them are known to harbour hot dust in their inner part where terrestrial planets may have formed. Thanks to infrared interferometric observations, it is possible to obtain a direct measurement of these regions, which are of prime importance for preparing future exo-Earth characterisation missions. In this context, we have resolved the exozodiacal dust disc around Vega with the help of infrared stellar interferometry and estimated the integrated H-band flux originating from the first few AUs of the debris disc. Using precise H-band interferometric measurements obtained with the 3-telescope IOTA/IONIC interferometer (Mount Hopkins, Arizona), thorough modelling of both interferometric data (squared visibility and closure phase) and spectral energy distribution was performed to constrain the nature of the near-infrared excess emission. The most straightforward scenario consists in a compact dust disc producing a thermal emission that is largely dominated by small grains located between 0.1 and 0.3 AU from Vega and accounting for 1.23 +/- 0.45% of the near-infrared stellar flux for our best-fit model. This flux ratio is shown to vary slightly with the geometry of the model used to fit our interferometric data (variations within +/-0.19%). Initially revealed by K-band CHARA/FLUOR observations, the presence of hot exozodiacal dust in the vicinity of Vega is confirmed by our H-band IOTA/IONIC measurements at the 3-sigma level. Whereas the origin of the dust is still uncertain, its presence and the possible connection with the outer disc suggest that the Vega system is currently undergoing major dynamical perturbations.Comment: 10 pages, 9 figures, accepted for publication in A&

    Circumstellar material in the Vega inner system revealed by CHARA/FLUOR

    Full text link
    Only a handful of debris disks have been imaged up to now. Due to the need for high dynamic range and high angular resolution, very little is known about the inner planetary region, where small amounts of warm dust are expected to be found. We investigate the close neighbourhood of Vega with the help of infrared stellar interferometry and estimate the integrated K-band flux originating from the central 8 AU of the debris disk. We performed precise visibility measurements at both short (~30 m) and long (~150 m) baselines with the FLUOR beam-combiner installed at the CHARA Array (Mt Wilson, California) in order to separately resolve the emissions from the extended debris disk (short baselines) and from the stellar photosphere (long baselines). After revising Vega's K-band angular diameter (3.202+/-0.005 mas), we show that a significant deficit in squared visibility (1.88+/-0.34%) is detected at short baselines with respect to the best-fit uniform disk stellar model. This deficit can be either attributed to the presence of a low-mass stellar companion around Vega, or as the signature of the thermal and scattered emissions from the debris disk. We show that the presence of a close companion is highly unlikely, as well as other possible perturbations (stellar morphology, calibration), and deduce that we have most probably detected the presence of dust in the close neighbourhood of Vega. The resulting flux ratio between the stellar photosphere and the debris disk amounts to 1.29+/-0.19% within the FLUOR field-of-view (~7.8 AU). Finally, we complement our K-band study with archival photometric and interferometric data in order to evaluate the main physical properties of the inner dust disk. The inferred properties suggest that the Vega system could be currently undergoing major dynamical perturbations.Comment: A&A, accepted -- Press release available at http://www2.cnrs.fr/presse/communique/848.ht
    corecore