258 research outputs found
Radiculopathy as Delayed Presentations of Retained Spinal Bullet.
Bullet injuries to the spine may cause injury to the anatomical structures with or without neurologic deterioration. Most bullet injuries are acute, resulting from direct injury. However, in rare cases, delayed injury may occur, resulting in claudication. We report a case of intradural bullet at the L3-4 level with radiculopathy in a 30-year-old male. After surgical removal, radicular and claudicating pain were improved significantly, and motor power of the right leg also improved. We report the case of intradural bullet, which resulted in delayed radiculopathy
Recommended from our members
Sequential Changes of Plasma C-Reactive Protein, Erythrocyte Sedimentation Rate and White Blood Cell Count in Spine Surgery : Comparison between Lumbar Open Discectomy and Posterior Lumbar Interbody Fusion.
ObjectiveC-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) are often utilized to evaluate for postoperative infection. Abnormal values may be detected after surgery even in case of non-infection because of muscle injury, transfusion, which disturbed prompt perioperative management. The purpose of this study was to evaluate and compare the perioperative CRP, ESR, and white blood cell (WBC) counts after spine surgery, which was proved to be non-infection.MethodsTwenty patients of lumbar open discectomy (LOD) and 20 patients of posterior lumbar interbody fusion (PLIF) were enrolled in this study. Preoperative and postoperative prophylactic antibiotics were administered routinely for 7 days. Blood samples were obtained one day before surgery and postoperative day (POD) 1, POD3, and POD7. Using repeated measures ANOVA, changes in effect measures over time and between groups over time were assessed. All data analysis was conducted using SAS v.9.1.ResultsChanges in CRP, within treatment groups over time and between treatment groups over time were both statistically significant F(3,120)=5.05, p=0.003 and F(1,39)=7.46, p=0.01, respectively. Most dramatic changes were decreases in the LOD group on POD3 and POD7. Changes in ESR, within treatment groups over time and between treatment groups over time were also found to be statistically significant, F(3,120)=6.67, p=0.0003 and F(1,39)=3.99, p=0.01, respectively. Changes in WBC values also were be statistically significant within groups over time, F(3,120)=40.52, p<0.001, however, no significant difference was found in between groups WBC levels over time, F(1,39)=0.02, p=0.89.ConclusionWe found that, dramatic decrease of CRP was detected on POD3 and POD7 in LOD group of non-infection and dramatic increase of ESR on POD3 and POD7 in PLIF group of non-infection. We also assumed that CRP would be more effective and sensitive parameter especially in LOD than PLIF for early detection of infectious complications. Awareness of the typical pattern of CRP, ESR, and WBC may help to evaluate the early postoperative course
Unintended complication of intracranial subdural hematoma after percutaneous epidural neuroplasty.
Percutaneous epidural neuroplasty (PEN) is a known interventional technique for the management of spinal pain. As with any procedures, PEN is associated with complications ranging from mild to more serious ones. We present a case of intracranial subdural hematoma after PEN requiring surgical evacuation. We review the relevant literature and discuss possible complications of PEN and patholophysiology of intracranial subdural hematoma after PEN
Stereotactic guidance for navigated percutaneous sacroiliac joint fusion.
Arthrodesis of the sacroiliac joint (SIJ) for surgical treatment of SIJ dysfunction has regained interest among spine specialists. Current techniques described in the literature most often utilize intraoperative fluoroscopy to aid in implant placement; however, image guidance for SIJ fusion may allow for minimally invasive percutaneous instrumentation with more precise implant placement. In the following cases, we performed percutaneous stereotactic navigated sacroiliac instrumentation using O-armĀ® multidimensional surgical imaging with StealthStationĀ® navigation (Medtronic, Inc. Minneapolis, MN). Patients were positioned prone and an image-guidance reference frame was placed contralateral to the surgical site. O-armĀ® integrated with StealthStationĀ® allowed immediate auto-registration. The skin incision was planned with an image-guidance probe. An image-guided awl, drill and tap were utilized to choose a starting point and trajectory. Threaded titanium cage(s) packed with autograft and/or allograft were then placed. O-armĀ® image-guidance allowed for implant placement in the SIJ with a small skin incision. However, we could not track the cage depth position with our current system, and in one patient, the SIJ cage had to be revised secondary to the anterior breach of sacrum
Titanium Plate Fixation for a Dehisced Sternum Following Coronary Artery Bypass Grafting: A Case Report
Sternal dehiscence is one of the most troublesome complications following cardiac surgery. Treatment failure and consequent lethal results are very common, even with all the efforts to resolve sternal dehiscence such as removal of infectious tissue, muscle flap interposition, and sternal rewiring. We report on a case of sternal osteomyelitis following coronary artery bypass grafting that was successfully treated with wide sternal resection, titanium plate fixation, and pectoralis muscle flap interposition
Antiretroviral Genotypic Resistance Mutations in HIV-1 Infected Korean Patients with Virologic Failure
Resistance assays are useful in guiding decisions for patients experiencing virologic failure (VF) during highly-active antiretroviral therapy (HAART). We investigated antiretroviral resistance mutations in 41 Korean human immunodeficiency virus type 1 (HIV-1) infected patients with VF and observed immunologic/virologic response 6 months after HAART regimen change. Mean HAART duration prior to resistance assay was 45.3Ā±27.5 months and commonly prescribed HAART regimens were zidovudine/lamivudine/nelfinavir (22.0%) and zidovudine/lamivudine/efavirenz (19.5%). Forty patients (97.6%) revealed intermediate to high-level resistance to equal or more than 2 antiretroviral drugs among prescribed HAART regimen. M184V/I mutation was observed in 36 patients (87.7%) followed by T215Y/F (41.5%) and M46I/L (34%). Six months after resistance assay and HAART regimen change, median CD4+ T cell count increased from 168 cells/ĀµL (interquartile range [IQR], 62-253) to 276 cells/ĀµL (IQR, 153-381) and log viral load decreased from 4.65 copies/mL (IQR, 4.18-5.00) to 1.91 copies/mL (IQR, 1.10-3.60) (P<0.001 for both values). The number of patients who accomplished viral load <400 copies/mL was 26 (63.4%) at 6 months follow-up. In conclusion, many Korean HIV-1 infected patients with VF are harboring strains with multiple resistance mutations and immunologic/virologic parameters are improved significantly after genotypic resistance assay and HAART regimen change
FINAL ICONE17-75008 DEVELOPMENT OF A NEW SPACER GRID FORM TO ENHANCE THE INTEGRITY OF FUEL ROD SUPPORT AND THE CRUSH STRENGTH OF A SPACER GRID ASSEMBLY
ABSTRACT A spacer grid is one of the most important structural components in a LWR fuel assembly. The spacer grid, which supports nuclear fuel rods laterally and vertically with a friction grip, is an interconnected array of slotted grid straps welded at the intersections to form an egg-crate structure. Dimples and springs are stamped into each grid strap to support the fuel rods. The form of grid straps and spring form is known to be closely related with the crush strength of spacer grid assembly and the integrity of fuel rod support, respectively. Zircaloy is prevailing as the material of the spacer grid because of its low neutron absorption characteristic and its successful extensive in-reactor use. The primary considerations are to provide a Zircaloy spacer grid with crush strength sufficient to resist design basis loads especially due to seismic accidents, without significantly increasing pressure drop across the reactor core. Generally, the thickness and height of the Zircaloy grid strap have been the main design variables in order to meet the above considerations. Recently, it was reported that a dimple location is also a design variable that affects the crush strength of a spacer grid assembly. In this study, a new spacer grid form was developed in order to enhance the integrity of the fuel rod support and the crush strength of the spacer grid assembly by using a systematic optimization technique. Finite element analysis and crush strength tests on the developed new spacer grid form were carried out to check the performance enhancement compared to commercial spacer grids. The enhancement of fuel rod support was confirmed by comparisons of contact area, peak stresses, plastic deformation and etc. According to the results, it is estimated that the actual critical load enhancement of the spacer grid assembly is approximately up to 30 % and the actual contact area, when a fuel rod inserted into a spacer grid cell, is more than double for the developed new spacer grid form. And also, some design variables that effect the crush strength of a PWR spacer grid assembly were classified and their effects on the crush strength were investigated by a finite element analysis and a crush strength test
CLINICAL AND ANGIOGRAPHIC OUTCOMES OF BIODEGRADABLE POLYMER BIOLIMUS-ELUTING STENTS VERSUS DURABLE POLYMER ZOTALOLIMUS-ELUTING STENTS WITH 6 MONTHS DUAL ANTIPLATELET THERAPY; ASSOCIATED WITH OPTICAL COHERENCE TOMOGRAPHY SUBSTUDY
- ā¦