An archean suture zone in the Tobacco Root Mountains? (1984) Evolution of Archean Continental Crust, SW Montana (1985)

The Lake Plateau area of the Beartooth Mountains, Montana were mapped and geochemically sampled. The allochthonous nature of the Stillwater Complex was interpreted as a Cordilleran-style continental margin. The metamorphic and tectonic history of the Beartooth Mountains was addressed. The Archean geology of the Spanish Peaks area, northern Madison Range was addressed. A voluminous granulite terrain of supracrustal origin was identified, as well as a heretofore unknown Archean batholithic complex. Mapping, petrologic, and geochemical investigations of the Blacktail Mountains, on the western margin of the Wyoming Province, are completed. Mapping at a scale of 1:24000 in the Archean rocks of the Gravelly Range is near completion. This sequence is dominantly of stable-platform origin. Samples were collected for geothermometric/barometric analysis and for U-Pb zircon age dating. The analyses provide the basis for additional geochemical and geochronologic studies. A model for the tectonic and geochemical evolution of the Archean basement of SW Montana is presented

Singlet and Triplet Superfluid Competition in a Mixture of Two-Component Fermi and One-Component Dipolar Bose Gases

We consider a mixture of two-component Fermi and (one-component) dipolar Bose gases in which both dipolar interaction and s-wave scattering between fermions of opposite spins are tunable. We show that in the long wavelength limit, the anisotropy in the Fermi-Fermi interaction induced by phonons of the dipolar condensate can strongly enhance the scattering in the triplet channel. We investigate in detail the conditions for achieving optimal critical temperature at which the triplet superfluid begins to compete with the singlet superfluid.Comment: 5 pages, 2 figure

Superfluid pairing in a mixture of a spin-polarized Fermi gas and a dipolar condensate

We consider a mixture of a spin-polarized Fermi gas and a dipolar Bose-Einstein condensate in which s-wave scattering between fermions and the quasiparticles of the dipolar condensate can result in an effective attractive Fermi-Fermi interaction anisotropic in nature and tunable by the dipolar interaction. We show that such an interaction can significantly increase the prospect of realizing a superfluid with a gap parameter characterized with a coherent superposition of all odd partial waves. We formulate, in the spirit of the Hartree-Fock-Bogoliubov mean-field approach, a theory which allows us to estimate the critical temperature when the anisotropic Fock potential is taken into consideration and to determine the system parameters that optimize the critical temperature at which such a superfluid emerges before the system begins to phase separate.Comment: 10 pages, 3 figure

Fruit Pest Events and Phenological Development According to Accumulated Heat Units

Mammals are "warm-blooded" and develop at a constant rate regardless of the environmental temperature, because they are able to maintain an internal temperature that allows their biochemical reactions to progress normally. Insects, which are "exothermic" (the same temperature as their environment; there is no such thing as "cold-blooded"), do not generate body heat, and are therefore limited in their development to periods of favorable external temperature. Below a certain temperature, which varies among species, the insect's biochemical reactions cannot proceed, and development stops. This temperature is known as the insect's developmental threshold ordevelopmental base. By charting the ambient temperature, it is possible to keep track of insect development, which is directly proportional to the amount of time accumulated above the developmental threshold (up to some maximum not often reached during the season). We arbitrarily divide this time into heat units, or degree-days (DD)

Corrosion and Grain Boundry Character Distribution(GBCD)in 316L Austenitic Stainless Steel

IGC (Inter-granular corrosion), in a single phase materials, is expected to depend on (a) Chemistry, (b) Grain size and (c) GBCD( Grain boundary character distr-ibution). In the present study, 316L austenitic stainless steel was deformed to different extent by unidirectional and by cross rolling. Subsequent solution: ing , i.e. a combination of primary recrystallization and grain growth, did not bring any noticeable difference in bulk texture. The GBCD, especially the 23 twin boundaries, were, however, significantly different. A difference of more than five times in low CSL (coincident site lattice) boun-daries were obtained. An effort was made to relate the effect of GBCD on corrosion - by DL- EPR (Double loop electrochemical potentiokinetic reactivation)

Flywheel energy storage workshop

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs

Performance evaluation of polymer-filled metal fused filament fabrication tooling for profile extrusion

The application of additive manufacturing (AM) for tooling in the mould and die industry brings a disruptive potential in process performance, design flexibility and product enhancements. Maturing of existing AM technologies and emerging technologies such as metal-fused filament fabrication (metal FFF) can further support the applicability of AM tooling in polymer profile extrusion. This study provides a complete characterization of metal FFF 17–4 PH stainless-steel die inserts and evaluates their applicability in a polymer extrusion process chain. The presented experimental assessment pivots on the metrological characterization of the produced inserts and the impact of the insert characteristics on the final extrudates’ product. Considering a conventionally manufactured benchmark insert, produced via subtractive methods (CNC machining and electrical discharge machining), comparable results for AM tools in terms of extrudates’ quality and process repeatability are presented. It was found that despite significant higher average surface parameters for AM insert tools (Sa = 2–9 μm vs. Sa = 0.3–0.9 μm for dies manufactured by machining), a much smaller difference was observed in the resulting quality of polymer extrudates’ product. The roughness generation effect of polymer profile extrusion based on the different dies’ internal surface roughness topography and the effect on extrudates product was evaluated. Three-dimensional average roughness Sa on acrylonitrile butadiene styrene extrudate surfaces obtained from conventionally machined dies was in the range of 0.3 μm. For extrudates obtained from additively manufactured dies, their Sa was in the rage of 0.5 μm (despite the much higher surface roughness of FFF dies compared to machined dies). The results confirm that with suitable extrudates’ product requirement, it is feasible to apply metal FFF as the selected manufacturing method for tooling in polymer profile extrusion

Experimental results of crystal-assisted slow extraction at the SPS

The possibility of extracting highly energetic particles from the Super Proton Synchrotron (SPS) by means of silicon bent crystals has been explored since the 1990's. The channelling effect of a bent crystal can be used to strongly deflect primary protons and eject them from the synchrotron. Many studies and experiments have been carried out to investigate crystal channelling effects. The extraction of 120 and 270 GeV proton beams has already been demonstrated in the SPS with dedicated experiments located in the ring. Presently in the SPS, the UA9 experiment is performing studies to evaluate the possibility to use bent silicon crystals to steer particle beams in high energy accelerators. Recent studies on the feasibility of extraction from the SPS have been made using the UA9 infrastructure with a longer-term view of using crystals to help mitigate slow extraction induced activation of the SPS. In this paper, the possibility to eject particles into the extraction channel in LSS2 using the bent crystals already installed in the SPS is presented. Details of the concept, simulations and measurements carried out with beam are presented, before the outlook for the future is discussed.Comment: 4 pages, 7 figures, submitted to to International Particle Accelerator Conference (IPAC) 2017 in Copenhagen, Denmar