2,500 research outputs found

    A versatile electrolyte system for electrodeposition of p-block elements from single ohase supercritical CH2F2

    Get PDF
    For the first time, a versatile electrolyte bath is described that can be used to electrodeposit a wide range of p-block elements from supercritical difluoromethane (scCH2F2). The bath comprises the tetrabutylammonium chlorometallate complex of the element in an electrolyte of 50×10−3 mol dm−3 tetrabutylammonium chloride at 17.2 MPa and 358 K. Through the use of anionic ([GaCl4]−, [InCl4]−, [GeCl3]−, [SnCl3]−, [SbCl4]−, and [BiCl4]−) and dianionic ([SeCl6]2− and [TeCl6]2−) chlorometallate salts, the deposition of elemental Ga, In, Ge, Sn, Sb, Bi, Se, and Te is demonstrated. In all cases, with the exception of gallium, which is a liquid under the deposition conditions, the resulting deposits are characterised by SEM, energy-dispersive X-ray analysis, XRD and Raman spectroscopy. An advantage of this electrolyte system is that the reagents are all crystalline solids, reasonably easy to handle and not highly water or oxygen sensitive. The results presented herein significantly broaden the range of materials accessible by electrodeposition from supercritical fluid and open up the future possibility of utilising the full scope of these unique fluids to electrodeposit functional binary or ternary alloys and compounds of these elements

    Measurement of Exercise Tolerance before Surgery (METS) study: a protocol for an international multicentre prospective cohort study of cardiopulmonary exercise testing prior to major non-cardiac surgery

    Get PDF
    Introduction: Preoperative functional capacity is considered an important risk factor for cardiovascular and other complications of major non-cardiac surgery. Nonetheless, the usual approach for estimating preoperative functional capacity, namely doctors’ subjective assessment, may not accurately predict postoperative morbidity or mortality. 3 possible alternatives are cardiopulmonary exercise testing; the Duke Activity Status Index, a standardised questionnaire for estimating functional capacity; and the serum concentration of N-terminal pro-B-type natriuretic peptide (NT pro-BNP), a biomarker for heart failure and cardiac ischaemia.Methods and analysis: The Measurement of Exercise Tolerance before Surgery (METS) Study is a multicentre prospective cohort study of patients undergoing major elective non-cardiac surgery at 25 participating study sites in Australia, Canada, New Zealand and the UK. We aim to recruit 1723 participants. Prior to surgery, participants undergo symptom-limited cardiopulmonary exercise testing on a cycle ergometer, complete the Duke Activity Status Index questionnaire, undergo blood sampling to measure serum NT pro-BNP concentration and have their functional capacity subjectively assessed by their responsible doctors. Participants are followed for 1?year after surgery to assess vital status, postoperative complications and general health utilities. The primary outcome is all-cause death or non-fatal myocardial infarction within 30?days after surgery, and the secondary outcome is all-cause death within 1?year after surgery. Both receiver-operating-characteristic curve methods and risk reclassification table methods will be used to compare the prognostic accuracy of preoperative subjective assessment, peak oxygen consumption during cardiopulmonary exercise testing, Duke Activity Status Index scores and serum NT pro-BNP concentration.Ethics and dissemination: The METS Study has received research ethics board approval at all sites. Participant recruitment began in March 2013, and 1-year follow-up is expected to finish in 2016. Publication of the results of the METS Study is anticipated to occur in 2017.<br/

    Site-Specific, Critical Threshold Barefoot Peak Plantar Pressure Associated with Diabetic Foot Ulcer History: A Novel Approach to Determine DFU Risk in the Clinical Setting

    Get PDF
    Background and Objectives: Barefoot peak plantar pressures (PPPs) are elevated in diabetes patients with neuropathic foot ulcer (DFU) history; however, there is limited reported evidence for a causative link between high barefoot PPP and DFU risk. We aimed to determine, using a simple mat-based methodology, the site-specific, barefoot PPP critical threshold that will identify a plantar site with a previous DFU. Materials and Methods: In a cross-sectional study, barefoot, site-specific PPPs were measured with normal gait for patients with DFU history (n = 21) and healthy controls (n = 12), using a validated carbon footprint system. For each participant, PPP was recorded at twelve distinct plantar sites (1st–5th toes, 1st–5th metatarsal heads (MTHs), midfoot and heel), per right and left foot, resulting in the analysis of n = 504 distinct plantar sites in the diabetes group, and n = 288 sites in the control group. Receiver operator characteristic curve analysis determined the optimal critical threshold for sites with DFU history. Results: Median PPPs for the groups were: diabetes sites with DFU history (n = 32) = 5.0 (3.25–7.5) kg/cm2, diabetes sites without DFU history (n = 472) = 3.25 (2.0–5.0) kg/cm2, control sites (n = 288) = 2.0 (2.0–3.25) kg/cm2; (p 6 kg/cm2) were six times more likely to have had DFU than diabetes sites with PPP ≤ 6 kg/cm2 (OR = 6.4 (2.8–14.6, 95% CI), p 4.1 kg/cm2 was determined as the optimal critical threshold for identifying DFU at a specific plantar site, with sensitivity/specificity = 100%/79% at midfoot; 80%/65% at 5th metatarsal head; 73%/62% at combined midfoot/metatarsal head areas. Conclusions: We have demonstrated, for the first time, a strong, site-specific relationship between elevated barefoot PPP and previous DFU. We have determined a critical, highly-sensitive, barefoot PPP threshold value of >4.1 kg/cm2, which may be easily used to identify sites of previous DFU occurrence and, therefore, increased risk of re-ulceration. This site-specific approach may have implications for how high PPPs should be investigated in future trials

    Polymer nanofilms with enhanced microporosity by interfacial polymerization

    Get PDF
    Highly permeable and selective membranes are desirable for energy-efficient gas and liquid separations. Microporous organic polymers have attracted significant attention in this respect owing to their high porosity, permeability, and molecular selectivity. However, it remains challenging to fabricate selective polymer membranes with controlled microporosity which are stable in solvents. Here we report a new approach to designing crosslinked, rigid polymer nanofilms with enhanced microporosity by manipulating the molecular structure. Ultra-thin polyarylate nanofilms with thickness down to 20 nm were formed in-situ by interfacial polymerisation. Enhanced microporosity and higher interconnectivity of intermolecular network voids, as rationalised by molecular simulations, are achieved by utilising contorted monomers for the interfacial polymerisation. Composite membranes comprising polyarylate nanofilms with enhanced microporosity fabricated in-situ on crosslinked polyimide ultrafiltration membranes show outstanding separation performance in organic solvents, with up to two orders of magnitude higher solvent permeance than membranes fabricated with nanofilms made from noncontorted planar monomers

    Search for New Physics Using Quaero: A General Interface to D0 Event Data

    Get PDF
    We describe Quaero, a method that i) enables the automatic optimization of searches for physics beyond the standard model, and ii) provides a mechanism for making high energy collider data generally available. We apply Quaero to searches for standard model WW, ZZ, and ttbar production, and to searches for these objects produced through a new heavy resonance. Through this interface, we make three data sets collected by the D0 experiment at sqrt(s)=1.8 TeV publicly available.Comment: 7 pages, submitted to Physical Review Letter
    • …
    corecore