Fresnel zone processing of synthetic aperture radar data

Fresnel zone processing of synthetic aperture rada

Dynamics of coupled vortices in layered magnetic nanodots

The spin dynamics are calculated for a model system consisting of magnetically soft, layered nanomagnets, in which two ferromagnetic (F) cylindrical dots, each with a magnetic vortex ground state, are separated by a non-magnetic spacer (N). This permits a study of the effects of interlayer magnetostatic interactions on the vortex dynamics. The system was explored by applying the equations of motion for the vortex core positions. The restoring force was calculated taking into account the magnetostatic interactions assuming a realistic surface charge free spin distribution. For tri-layer F/N/F dots with opposite chiralities and the same core polarizations (lowest energy state), two eigenmodes are predicted analytically and confirmed via micromagnetic simulations. One mode is in the sub-GHz range for submicron dot diameters and corresponds to quasi-circular rotation of the cores about the dot center. A second mode is in the MHz range corresponding to a small amplitude rotation of the mean core position. The eigenfrequencies depend strongly on the geometrical parameters of the system, suggesting that magnetostatic effects play a dominant role in determining the vortex dynamics.Comment: One PDF file including text and 4 figure

Non-linear vortex dynamics and transient effects in ferromagnetic disks

We report a time resolved imaging and micromagnetic simulation study of the relaxation dynamics of a magnetic vortex in the non-linear regime. We use time-resolved photoemission electron microscopy and micromagnetic calculations to examine the emergence of non-linear vortex dynamics in patterned Ni80Fe20 disks in the limit of long field pulses. We show for core shifts beyond ~20-25% of the disk radius, the initial motion is characterized by distortions of the vortex, a transient cross-tie wall state, and instabilities in the core polarization that influence the core trajectories.Comment: 11 pages, 3 figures, submitted to Phys. Rev. Let

Investigation on the structural behaviour of timber concrete composite connections

A project exploring innovative structural systems that utilise timber and provide a competitive alternative to steel and concrete products commenced at the University of Technology, Sydney, in 2007. It aims to identify and develop at least three flooring/framing concepts suitable for initial application in a two-/three-storey commercial building in Australia. In this context, a timber concrete composite (TCC) represents a competitive solution. An important aspect of TCC structures corresponds to the shear connectors, which are essential for TCC structural behaviour. Thus, they need to provide sufficient strength and impair slip between TCC layers. A laboratory investigation on these connectors is discussed in this paper. The scope and research plan are presented and the connection strength and stiffness are analysed and commented. © 2009 Taylor & Francis Group, London

Magnetic Vortex Resonance in Patterned Ferromagnetic Dots

We report a high-resolution experimental detection of the resonant behavior of magnetic vortices confined in small disk-shaped ferromagnetic dots. The samples are magnetically soft Fe-Ni disks of diameter 1.1 and 2.2 um, and thickness 20 and 40 nm patterned via electron beam lithography onto microwave co-planar waveguides. The vortex excitation spectra were probed by a vector network analyzer operating in reflection mode, which records the derivative of the real and the imaginary impedance as a function of frequency. The spectra show well-defined resonance peaks in magnetic fields smaller than the characteristic vortex annihilation field. Resonances at 162 and 272 MHz were detected for 2.2 and 1.1 um disks with thickness 40 nm, respectively. A resonance peak at 83 MHz was detected for 20-nm thick, 2-um diameter disks. The resonance frequencies exhibit weak field dependence, and scale as a function of the dot geometrical aspect ratio. The measured frequencies are well described by micromagnetic and analytical calculations that rely only on known properties of the dots (such as the dot diameter, thickness, saturation magnetization, and exchange stiffness constant) without any adjustable parameters. We find that the observed resonance originates from the translational motion of the magnetic vortex core.Comment: submitted to PRB, 17 pages, 5 Fig

Polarity Reversal of a Magnetic Vortex Core by a Unipolar, Nonresonant In-plane Pulsed Magnetic Field

We report the polarity reversal of a magnetic vortex core using a nonresonant in-plane pulsed magnetic field of arbitrary waveform studied using time-resolved x-ray photoemission electron microscopy and micromagnetic simulations. The imaging and simulations show that a 5 mT pulse, higher than the critical field for nonlinear effects, effectively leads to the randomization of the vortex core polarity. The micromagnetic simulations further show that the onset of stochastic core polarity randomization does not necessarily coincide with the critical reversal field, leading to a field window for predictable core reversal

Polarity Reversal of a Magnetic Vortex Core by a Unipolar, Nonresonant In-plane Pulsed Magnetic Field

We report the polarity reversal of a magnetic vortex core using a nonresonant in-plane pulsed magnetic field of arbitrary waveform studied using time-resolved x-ray photoemission electron microscopy and micromagnetic simulations. The imaging and simulations show that a 5 mT pulse, higher than the critical field for nonlinear effects, effectively leads to the randomization of the vortex core polarity. The micromagnetic simulations further show that the onset of stochastic core polarity randomization does not necessarily coincide with the critical reversal field, leading to a field window for predictable core reversal

Controlled Thiol-ene Polymer Microsphere Production Using a Low-Frequency Acoustic Excitation Coaxial Flow Method

A novel technique for the production of thiol-ene microspheres using acoustic resonance and coaxial flow is reported. The method utilizes low-frequency acoustically driven mechanical perturbations to disrupt the flow of a thiol-ene liquid jet, resulting in small thiol-ene droplets that are photochemically polymerized to yield thiol-ene microspheres. Tuning of the frequency, amplitude, and monomer solution viscosity are critical parameters impacting the diameter of the microspheres produced. Characterization by optical microscopy, scanning electron microscopy, and dynamic light scattering reveal microspheres of diameters \u3c10 mu m, with narrow particle distributions. (C) 2016 Elsevier Ltd. All rights reserved