Modulation of Sn concentration in ZnO nanorod array: intensification on the conductivity and humidity sensing properties

Tin (Sn)-doped zinc oxide (ZnO) nanorod arrays (TZO) were synthesized onto aluminum-doped ZnO-coated glass substrate via a facile sonicated sol–gel immersion method for humidity sensor applications. These nanorod arrays were grown at different Sn concentrations ranging from 0.6 to 3 at.%. X-ray diffraction patterns showed that the deposited TZO arrays exhibited a wurtzite structure. The stress/strain condition of the ZnO film metamorphosed from tensile strain/compressive stress to compressive strain/tensile stress when the Sn concentrations increased. Results indicated that 1 at.% Sn doping of TZO, which has the lowest tensile stress of 0.14 GPa, generated the highest conductivity of 1.31 S cm− 1. In addition, 1 at.% Sn doping of TZO possessed superior sensitivity to a humidity of 3.36. These results revealed that the optimum performance of a humidity-sensing device can be obtained mainly by controlling the amount of extrinsic element in a ZnO film

Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application

[EN] Copper-indium gallium disulfide (CIGS) is a good absorber for photovoltaic application. Thin films of CIGS were prepared by spray pyrolysis on glass substrates in the ambient atmosphere. The films were characterized by different techniques, such as structural, morphological, optical and electrical properties of CIGS films were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), spectrophotometer and Hall effect, respectively. After optimization, the deposited films structure, grain size, and crystallinity became more important with an increase of annealing time at 370 degrees C for 20 min. Transmission electron microscopy (TEM) analysis shows that the interface sheets are well crystallized and the inter planer distance are 0.25 nm, 0.28 nm, and 0.36 nm. The atomic force microscopy (AFM) observation shows that the grain size and roughness can be tolerated by optimizing the annealing time. The strong absorbance and low transmittance were observed for the prepared films with a suitable energy bandgap about 1.46 eV. The Hall effect measurement system examined that CIGS films exhibited optimal electrical properties, resistivity, carrier mobility, and carrier concentration which were determined to be 4.22 x 10(6) omega cm, 6.18 x 10(2) cm(2) V-1 S-1 and 4.22 x 10(6) cm(-3), respectively. The optoelectronic properties of CIGS material recommended being used for the photovoltaic application.Prof. Bouchaib HARTITI, The Senior Associate at ICTP, is very grateful to ICTP for permanent support. Prof. Mohamed Ebn Touhami, Director of the University Center for Analysis, Expertise, Transfer of Technology and Incubation, Kenitra, Morocco, is very grateful to CUA2TI for financial support. Thanks to Doctor Diogo M.F. Santos for the supervision of Amal Bouich's work during her research in CeFEMA research center. The authors also thank researchers from CeFEMA (IST-ULisboa, Portugal) and CUA2TI (FS-Kenitra Morocco) for their help.Bouich, A.; Hartiti, B.; Ullah, S.; Ullah, H.; Ebn Touhami, M.; Santos, DMF.; Marí, B. (2019). Optoelectronic characterization of CuInGa(S)2 thin films grown by spray pyrolysis for photovoltaic application. Applied Physics A. 125(8):1-9. https://doi.org/10.1007/s00339-019-2874-4S191258T. Feurer, P. Reinhard, E. Avancini, B. Bissig, J. Löckinger, P. Fuchs, S. Buecheler, Progress in thin film CIGS photovoltaics–Research and development, manufacturing, and applications. Prog. Photovolt. Res. Appl. 25(7), 645–667 (2017)A. Zegadi, M.A. Slifkin, M. Djamin, A.E. Hill, R.D. Tomlinson, A photoacoustic study of CuInxGa1− xSe2 alloys. Phys. Status Solidi (A) 133(2), 533–540 (1992)T.H. Sajeesh, A.R. Warrier, C.S. Kartha, K.P. Vijayakumar, Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS. Thin Solid Films 518(15), 4370–4374 (2010)J. Liu, D. Zhuang, H. Luan, M. Cao, M. Xie, X. Li, Preparation of Cu (In, Ga) Se2 thin film by sputtering from Cu (In, Ga) Se2 quaternary target. Progr. Nat. Sci. Mater. Int. 23(2), 133–138 (2013)M.I. Hossain, Fabrication and characterization of CIGS solar cells with In2 S3 buffer layer deposited by PVD technique. Chalcogenide Lett. 9(5), 185–191 (2012)M.A. Mughal, R. Engelken, R. Sharma, Progress in indium (III) sulfide (In2S3) buffer layer deposition techniques for CIS, CIGS, and CdTe-based thin film solar cells. Sol. Energy 120, 131–146 (2015)M. Powalla, M. Cemernjak, J. Eberhardt, F. Kessler, R. Kniese, H.D. Mohring, B. Dimmler, Large-area CIGS modules: Pilot line production and new developments. Sol. Energy Mater Sol. Cells 90(18–19), 3158–3164 (2006)M.E. Calixto, P.J. Sebastian, R.N. Bhattacharya, R. Noufi, Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition. Sol. Energy Mater. Sol. Cells 59(1–2), 75–84 (1999)S. Jung, S. Ahn, J.H. Yun, J. Gwak, D. Kim, K. Yoon, Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique. Curr. Appl. Phys. 10(4), 990–996 (2010)S. R. Ovshinsky, X. Deng, R. Young, U.S. Patent No. 5,231,047. Washington, DC: U.S. Patent and Trademark Office (1993).M. Kaelin, D. Rudmann, A.N. Tiwari, Low cost processing of CIGS thin film solar cells. Sol. Energy 77(6), 749–756 (2004)Fangdan Jiang, Jiayou Feng, Effect of temperature on selenization process of metallic Cu–In alloy precursors. Thin Solid Films 515(4), 1950–1955 (2006)S. Shirakata, Y. Kannaka, H. Hasegawa, T. Kariya, S. Isomura, Properties of Cu (In, Ga) Se2 thin films prepared by chemical spray pyrolysis. Jpn. J. Appl. Phys. 38(9R), 4997 (1999)Y.K. Kumar, G.S. Babu, P.U. Bhaskar, V.S. Raja, Effect of starting-solution pH on the growth of Cu2ZnSnS4 thin films deposited by spray pyrolysis. Phys. Status Solidi (A) 206(7), 1525–1530 (2009)M. Ajili, M. Castagné, N.K. Turki, Characteristics of CuIn1− xGaxS2 thin films synthesized by chemical spray pyrolysis. J. Lumin. 150, 1–7 (2014)B.J. Babu, S. Velumani, A. Kassiba, R. Asomoza, J.A. Chavez-Carvayar, J. Yi, Deposition and characterization of graded Cu (In1-xGax) Se2 thin films by spray pyrolysis. Mater. Chem. Phys. 162, 59–68 (2015)S.F. Varol, G. Babür, G. Çankaya, U. Kölemen, Synthesis of sol–gel derived nano-crystalline ZnO thin films as TCO window layer: effect of sol aging and boron. RSC Adv. 4(100), 56645–56653 (2014)J.A. Frantz, R.Y. Bekele, V.Q. Nguyen, J.S. Sanghera, A. Bruce, S.V. Frolov, I.D. Aggarwal, Cu (In, Ga) Se2 thin films and devices sputtered from a single target without additional selenization. Thin Solid Films 519(22), 7763–7765 (2011)C. Calderón, G. Gordillo, P. Bartolo-Pérez, F. Mesa, Effect of the deposition conditions on the optical, morphological and compositional properties of CuIn1− xGaxSe2 thin films prepared by a multistage process. Revista Mexicana de Física 53(7), 270–273 (2007)D. Schmid, M. Ruckh, F. Grunwald, H.W. Schock, Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CuInSe2. J. Appl. Phys. 73(6), 2902–2909 (1993)U.C. Matur, S. Akyol, N. Baydoğan, H. Cimenoglu, The optical properties of CIGS thin films derived by sol-gel dip coating process at different withdrawal speed. Proc. Soc. Behav. Sci. 195, 1762–1767 (2015)A. Bouich, B. Hartiti, S. Ullah, M.E. Touhami, B. Mari, D.M.F. Santos, Investigation of the optical properties of CuIn (Se, S)2 thin films for photovoltaic application. Mater. Today Proc. 13, 663–669 (2019)K. Matsumura, T. Fujita, H. Itoh, D. Fujita, Characterization of carrier concentration in CIGS solar cells by scanning capacitance microscopy. Meas. Sci. Technol. 25(4), 044020 (2014)A. Bouich, B. Hartiti, S. Ullah, H. Ullah, M.E. Touhami, D.M.F. Santos, B. Mari, Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1–x) S2 based solar cells. Optik 183, 137–147 (2019

The I4U Mega Fusion and Collaboration for NIST Speaker Recognition Evaluation 2016

The 2016 speaker recognition evaluation (SRE'16) is the latest edition in the series of benchmarking events conducted by the National Institute of Standards and Technology (NIST). I4U is a joint entry to SRE'16 as the result from the collaboration and active exchange of information among researchers from sixteen Institutes and Universities across 4 continents. The joint submission and several of its 32 sub-systems were among top-performing systems. A lot of efforts have been devoted to two major challenges, namely, unlabeled training data and dataset shift from Switchboard-Mixer to the new Call My Net dataset. This paper summarizes the lessons learned, presents our shared view from the sixteen research groups on recent advances, major paradigm shift, and common tool chain used in speaker recognition as we have witnessed in SRE'16. More importantly, we look into the intriguing question of fusing a large ensemble of sub-systems and the potential benefit of large-scale collaboration.Peer reviewe

Examining the role of three sets of innovation attributes for determining adoption of the interbank mobile payment service

The interbank mobile payment service (IMPS) is a very recent technology in India that serves the very critical purpose of a mobile wallet. To account for the adoption and use of IMPS by the Indian consumers, this study seeks to compare three competing sets of attributes borrowed from three recognized pieces of work in the area of innovations adoption. This study aims to examine which of the three sets of attributes better predicts the adoption of IMPS in an Indian context. The research model is empirically tested and validated against the data gathered from 323 respondents from different cities in India. The findings are analysed using the SPSS analysis tool, which are then discussed to derive the key conclusions from this study. The research implications are stated, limitations listed and suggestions for future research on this technology are then finally made

A year of genomic surveillance reveals how the SARS-CoV-2 pandemic unfolded in Africa

[Figure: see text]

A year of genomic surveillance reveals how the SARS-CoV-2 pandemic unfolded in Africa.

The progression of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic in Africa has so far been heterogeneous, and the full impact is not yet well understood. In this study, we describe the genomic epidemiology using a dataset of 8746 genomes from 33 African countries and two overseas territories. We show that the epidemics in most countries were initiated by importations predominantly from Europe, which diminished after the early introduction of international travel restrictions. As the pandemic progressed, ongoing transmission in many countries and increasing mobility led to the emergence and spread within the continent of many variants of concern and interest, such as B.1.351, B.1.525, A.23.1, and C.1.1. Although distorted by low sampling numbers and blind spots, the findings highlight that Africa must not be left behind in the global pandemic response, otherwise it could become a source for new variants

The evolving SARS-CoV-2 epidemic in Africa: Insights from rapidly expanding genomic surveillance

INTRODUCTION Investment in Africa over the past year with regard to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) sequencing has led to a massive increase in the number of sequences, which, to date, exceeds 100,000 sequences generated to track the pandemic on the continent. These sequences have profoundly affected how public health officials in Africa have navigated the COVID-19 pandemic. RATIONALE We demonstrate how the first 100,000 SARS-CoV-2 sequences from Africa have helped monitor the epidemic on the continent, how genomic surveillance expanded over the course of the pandemic, and how we adapted our sequencing methods to deal with an evolving virus. Finally, we also examine how viral lineages have spread across the continent in a phylogeographic framework to gain insights into the underlying temporal and spatial transmission dynamics for several variants of concern (VOCs). RESULTS Our results indicate that the number of countries in Africa that can sequence the virus within their own borders is growing and that this is coupled with a shorter turnaround time from the time of sampling to sequence submission. Ongoing evolution necessitated the continual updating of primer sets, and, as a result, eight primer sets were designed in tandem with viral evolution and used to ensure effective sequencing of the virus. The pandemic unfolded through multiple waves of infection that were each driven by distinct genetic lineages, with B.1-like ancestral strains associated with the first pandemic wave of infections in 2020. Successive waves on the continent were fueled by different VOCs, with Alpha and Beta cocirculating in distinct spatial patterns during the second wave and Delta and Omicron affecting the whole continent during the third and fourth waves, respectively. Phylogeographic reconstruction points toward distinct differences in viral importation and exportation patterns associated with the Alpha, Beta, Delta, and Omicron variants and subvariants, when considering both Africa versus the rest of the world and viral dissemination within the continent. Our epidemiological and phylogenetic inferences therefore underscore the heterogeneous nature of the pandemic on the continent and highlight key insights and challenges, for instance, recognizing the limitations of low testing proportions. We also highlight the early warning capacity that genomic surveillance in Africa has had for the rest of the world with the detection of new lineages and variants, the most recent being the characterization of various Omicron subvariants. CONCLUSION Sustained investment for diagnostics and genomic surveillance in Africa is needed as the virus continues to evolve. This is important not only to help combat SARS-CoV-2 on the continent but also because it can be used as a platform to help address the many emerging and reemerging infectious disease threats in Africa. In particular, capacity building for local sequencing within countries or within the continent should be prioritized because this is generally associated with shorter turnaround times, providing the most benefit to local public health authorities tasked with pandemic response and mitigation and allowing for the fastest reaction to localized outbreaks. These investments are crucial for pandemic preparedness and response and will serve the health of the continent well into the 21st century

Induced rotational excitation of the fluoromethylidynium

Aims. The present paper focuses on the calculation of the collision rate coefficients for rotational excitation of the 12CF+ and its isotopologue 13CF+ by He for temperature ranging from 10 to 300 K. Methods. A two-dimentional (2D) potential energy surface (PES) of the CF+(X1Σ+)-He(1S) system is calculated at the ab initio coupled cluster with single, double, and perturbative triple excitation level of theory with the aug-cc-pV5Z basis set. The basis set superposition errors were taken into account in our computation. Dynamical calculations of state-to-state rotational integral cross sections of the CF+ by collision with He were performed using the close-coupling method. Results. The PES presents a global minimum of ~212 cm-1 below the CF+-He dissociation limit. Collisional cross sections among the first 11 rotational levels of CF+ were calculated for total energies up to 1500 cm-1. Downward rate coefficients between the rotational levels were calculated for temperature ranging from 10 to 300 K. A propensity toward an even parity of ΔJ is observed

Cancer du rein et Grossesse: A propos d’une nouvelle observation

Le carcinome rénal est rarement diagnostiqué pendant la grossesse et sa prise en charge représente un véritable défi pour l’obstétricien et l’urologue. Nous rapportons le cas d’une patiente âgée de 38 ans, sans antécédents pathologiques notables, enceinte avec un terme de 16 semaines d’aménorrhée, présentant des lombalgies gauches. Le diagnostic de tumeur rénale était retenu sur les données du couple échographie rénale et IRM abdominale. La patiente a bénéficié d’une néphrectomie élargie par voie lombaire. L’analyse histologique de la pièce de néphrectomie totale a révélé un adénocarcinome à cellules claires. L’évolution était favorable après le traitement avec une grossesse menée à terme