1,514 research outputs found
Muscle-tendon unit mechanobiological responses to consecutive high strain cyclic loading
In response to a mechanical stimulus, tendons have a slower tissue renewal rate compared to muscles. This could over time lead to a higher mechanical demand (experienced strain) for the tendon, especially when a high strain magnitude exercise is repeated without sufficient recovery. The current study investigated the adaptive responses of the triceps surae (TS) muscle-tendon unit (MTU) and extracellular matrix turnover-related biomarkers to repetitive high tendon strain cyclic loading. Eleven young male adults performed a progressive resistance exercise over 12 consecutive days, consisting of high Achilles tendon (AT) strain cyclic loading (90% MVC) with one leg once a day (LegT1) and the alternate leg three times a day (LegT3). Exercise-related changes in TS MTU mechanical properties and serum concentrations of extracellular matrix turnover-related biomarkers were analysed over the intervention period. Both legs demonstrated similar increases in maximal AT force (∼10%) over the 12-day period of exercise. A ∼20% increase in maximal AT strain was found for LegT3 (p<0.05) already after 8 consecutive exercise days, along with a corresponding decrease in AT stiffness. These effects were maintained even after a 48h rest period. The AT mechanical properties for LegT1 were unaltered. Biomarker analysis revealed no sign of inflammation, but altered collagen turnover and delayed increase in the collagen type I synthesis rate. Accordingly, we suggest that tendon is vulnerable to frequent high-magnitude and volume of cyclic mechanical loading, as accumulation of micro-damage can potentially exceed the rate of biological repair, leading to increased maximal tendon strai
Friction and wear in railway ballast stone interfaces
Particle friction in railway ballast influences strongly the behaviour of ballasted tracks. New challenges posed on railway infrastructure increase the requirement for simulations, which need the friction coefficient as an input parameter. Measured friction coefficients of ballast stone contacts were found only in two studies, both under constant loads. In this work, two types of ballast were investigated in cyclic friction tests with incremental increase of the applied load after several cycles. Before each load increase, 3D-scans of some ballast stones allowed to calculate the contact area. Estimating the stress in the contact, the stress-dependency of the friction coefficient and wear were investigated. These experimental observations are discussed regarding their impact for friction modelling in the simulation of railway ballast
Shape analysis of railway ballast stones : curvature-based calculation of particle angularity
Particle shape analysis is conducted, to compare two types of railway ballast: Calcite and Kieselkalk. Focus lies on the characterisation of particle angularity using 3D scanner data. In the literature, angularity is often characterised using 2D data, as these types of data are easier to collect. 3D scanner data contain a vast amount of information (e.g. curvatures) which can be used for shape analysis and angularity characterisation. Literature approaches that use 3D data are often not thoroughly tested, due to a lack of test cases. In this work, two new curvature-based angularity indices are introduced and compared to one from the literature. Analytical test bodies with shapes ranging from spherical towards cubic are used for a first plausibility test. Then, 3D scans of ballast stones are compared to artificially rounded meshes. Only one out of three evaluated angularity indices seem to be suited to characterise angularity correctly in all of the above tests: the newly introduced scaled Willmore energy. A complete shape analysis of the scanned ballast stones is conducted and no difference between the two types of ballast can be seen regarding form, angularity, roughness, sphericity or convexity index. These findings of shape analysis are set in the context of previous works, where experimental results and DEM simulations of uniaxial compression tests and direct shear tests were presented for the same ballast types
Near-infrared photoabsorption by C(60) dianions in a storage ring
We present a detailed study of the electronic structure and the stability of C(60) dianions in the gas phase. Monoanions were extracted from a plasma source and converted to dianions by electron transfer in a Na vapor cell. The dianions were then stored in an electrostatic ring, and their near-infrared absorption spectrum was measured by observation of laser induced electron detachment. From the time dependence of the detachment after photon absorption, we conclude that the reaction has contributions from both direct electron tunneling to the continuum and vibrationally assisted tunneling after internal conversion. This implies that the height of the Coulomb barrier confining the attached electrons is at least similar to 1.5 eV. For C(60)(2-) ions in solution electron spin resonance measurements have indicated a singlet ground state, and from the similarity of the absorption spectra we conclude that also the ground state of isolated C(60)(2-) ions is singlet. The observed spectrum corresponds to an electronic transition from a t(1u) lowest unoccupied molecular orbital (LUMO) of C(60) to the t(1g) LUMO+1 level. The electronic levels of the dianion are split due to Jahn-Teller coupling to quadrupole deformations of the molecule, and a main absorption band at 10723 cm(-1) corresponds to a transition between the Jahn-Teller ground states. Also transitions from pseudorotational states with 200 cm(-1) and (probably) 420 cm(-1) excitation are observed. We argue that a very broad absorption band from about 11 500 cm(-1) to 13 500 cm(-1) consists of transitions to so-called cone states, which are Jahn-Teller states on a higher potential-energy surface, stabilized by a pseudorotational angular momentum barrier. A previously observed, high-lying absorption band for C(60)(-) may also be a transition to a cone state
Risk assessment and mapping of extreme floods in non-dyked communities along the Elbe and Mulde Rivers
International audienceAssessing and mapping damage risk of floods for large river basins is still in its infancy. Damage risk is understood to be the combination of flood hazard and the vulnerability of communities to a flood of a particular return period. Risk is calculated and mapped for two communities in which dykes are not located for flood protection: Meissen on the Elbe River and Döbeln in the Mulde catchment. Different methodologies for the computation of flood depth and inundation extent of varying flood return periods (hazard) are compared. Exposure and relative damage to the flooding (vulnerability) based on land-use coverages of different scale are also compared and discussed. A property asset coverage completes the data requirements for the construction of the risk maps. Recommendations for continued research on risk assessments of large river basins conclude the study
Permafrost meta-omics and climate change
Permanently frozen soil, or permafrost, covers a large portion of the Earth's terrestrial surface and represents a unique environment for cold-adapted microorganisms. As permafrost thaws, previously protected organic matter becomes available for microbial degradation. Microbes that decompose soil carbon produce carbon dioxide and other greenhouse gases, contributing substantially to climate change. Next-generation sequencing and other -omics technologies offer opportunities to discover the mechanisms by which microbial communities regulate the loss of carbon and the emission of greenhouse gases from thawing permafrost regions. Analysis of nucleic acids and proteins taken directly from permafrost-associated soils has provided new insights into microbial communities and their functions in Arctic environments that are increasingly impacted by climate change. In this article we review current information from various molecular -omics studies on permafrost microbial ecology and explore the relevance of these insights to our current understanding of the dynamics of permafrost loss due to climate change
Sanded wheel–rail contacts: experiments on sand crushing behaviour
In railway operation, the sanding process is used to overcome low adhesion conditions in the wheel–rail contact. In the literature, previously conducted research has been experimental, e.g., measuring adhesion coefficients (ACs) under different contact conditions (dry, wet, …) or applying different sands. Under dry conditions, sanding can reduce measured ACs, while under wet conditions different types of rail sand can leave ACs unchanged or increase adhesion. Despite active research, the physical mechanisms causing the change in ACs under sanded conditions are still poorly understood. A possible remedy is the development of advanced models of sanding including local effects. As a basis for such a model, this study presents experimental results concerning single grain crushing behaviour of two types of rail sand under dry and wet contact conditions. Firstly, initial breakage behaviour is investigated with focus on the particle fragments’ size and spread as only fragments within the running band are available to influence the AC during roll-over. Secondly, single grain crushing tests are conducted under realistic wheel–rail load showing the formation of solidified clusters of sand fragments, as well as their size and thickness. This information is important for understanding mechanisms and for future physics-based modelling of the sanding process in wheel–rail contacts
DEM modelling of railway ballast using the Conical Damage Model: a comprehensive parametrisation strategy
Despite ongoing research, the parametrisation of a DEM model is a challenging task, as it depends strongly on the particle shape representation used, particle-particle contact law and the simulated applications: for railway ballast e.g. lab tests or track conditions. The authors previously modelled railway ballast with a DEM model using a simple particle shape. The DEM model was parametrised, by trial-and-error, to compression and direct shear test results. A good agreement between DEM model and experimental results was achieved only when the Conical Damage Model (CDM) was used as the contact law. Compared to the well-known linear-spring Cundall-Strack law or the Hertz-Mindlin law, this contact law takes into account additional physical effects (e.g. edge breakage) occurring in the experiment. Little is known on the influence of the CDM model parameters on the simulation results or on possible parameter ambiguities. This lack of knowledge hinders a reliable and efficient parametrisation of DEM models using different particle shapes. Both points are addressed in this work in detail by investigating a DEM model for railway ballast using one simple particle shape. Suggestions for a parametrisation strategy of reduced computational effort are formulated and tested using a second particle shape. In future works, the newly presented parametrisation strategy can help to calibrate different DEM models and to study the influence of particle shape
Genetic analysis of seed traits in \u3ci\u3eSorghum bicolor\u3c/i\u3e that affect the human gut microbiome
Prebiotic fibers, polyphenols and other molecular components of food crops significantly affect the composition and function of the human gut microbiome and human health. The abundance of these, frequently uncharacterized, microbiome-active components vary within individual crop species. Here, we employ high throughput in vitro fermentations of pre-digested grain using a human microbiome to identify segregating genetic loci in a food crop, sorghum, that alter the composition and function of human gut microbes. Evaluating grain produced by 294 sorghum recombinant inbreds identifies 10 loci in the sorghum genome associated with variation in the abundance of microbial taxa and/or microbial metabolites. Two loci co-localize with sorghum genes regulating the biosynthesis of condensed tannins. We validate that condensed tannins stimulate the growth of microbes associated with these two loci. Our work illustrates the potential for genetic analysis to systematically discover and characterize molecular components of food crops that influence the human gut microbiome
- …