261 research outputs found

    Three-dimensional phenomena in microbubble acoustic streaming

    Full text link
    Ultrasound-driven oscillating micro-bubbles have been used as active actuators in microfluidic devices to perform manifold tasks such as mixing, sorting and manipulation of microparticles. A common configuration consists on side-bubbles, created by trapping air pockets in blind channels perpendicular to the main channel direction. This configuration consists of acoustically excited bubbles with a semi-cylindrical shape that generate significant streaming flow. Due to the geometry of the channels, such flows have been generally considered as quasi two-dimensional. Similar assumptions are often made in many other microfluidic systems based on \emph{flat} micro-channels. However, in this paper we show that microparticle trajectories actually present a much richer behavior, with particularly strong out-of-plane dynamics in regions close to the microbubble interface. Using Astigmatism Particle Tracking Velocimetry, we reveal that the apparent planar streamlines are actually projections of a \emph{streamsurface} with a pseudo-toroidal shape. We therefore show that acoustic streaming cannot generally be assumed as a two-dimensional phenomenon in confined systems. The results have crucial consequences for most of the applications involving acoustic streaming as particle trapping, sorting and mixing.Comment: 5 pages, 4 high quality figures. Accepted for Publication in Phys. Rev. Applied, March 201

    On the effect of particle image intensity and image preprocessing on the depth of correlation in micro-PIV

    Get PDF
    The depth of correlation (DOC) is an experimental parameter, introduced to quantify the thickness of the measurement volume and thus the depth resolution in microscopic particle image velocimetry (lPIV). The theory developed to estimate the value of the DOC relies on some approximations that are not always verified in actual experiments, such as a single thin-lens optical system. In many practical μPIV experiments, a deviation of the actual DOC from its nominal value can be expected, due for instance to additional components present in the optical path of the microscope or to the use of image preprocessing before the PIV evaluation. In the presented paper, the effect of real particle image intensity distribution and image preprocessing on the thickness of the measurement volume is investigated. This is performed studying the defocusing of tracer particles and the DOC-related bias error present in lPIV measurements in a Poiseuille flow. The analysis shows that the DOC predicted using the conventional formulas can be significantly smaller than its actual value. To overcome this problem, the use of an effective NA determined experimentally from the curvature of the image autocorrelations is proposed. The accuracy of this approach to properly predict the actual size of DOC is discussed and validated on the experimental data. The effectiveness of image preprocessing to reduce the DOC-related bias error is tested and discussed as well. © The Author(s) 2011

    Scaling of droplet breakup in high-pressure homogenizer orifices. Part I: Comparison of velocity profiles in scaled coaxial orifices

    Get PDF
    Properties of emulsions such as stability, viscosity or color can be influenced by the droplet size distribution. High-pressure homogenization (HPH) is the method of choice for emulsions with a low to medium viscosity with a target mean droplet diameter of less than 1 µm. During HPH, the droplets of the emulsion are exposed to shear and extensional stresses, which cause them to break up. Ongoing work is focused on better understanding the mechanisms of droplet breakup and relevant parameters. Since the gap dimensions of the disruption unit (e.g., flat valve or orifice) are small (usually below 500 µm) and the droplet breakup also takes place on small spatial and time scales, the resolution limit of current measuring systems is reached. In addition, the high velocities impede time resolved measurements. Therefore, a five-fold and fifty-fold magnified optically accessible coaxial orifice were used in this study while maintaining the dimensionless numbers characteristic for the droplet breakup (Reynolds and Weber number, viscosity and density ratio). Three matching material systems are presented. In order to verify their similarity, the local velocity profiles of the emerging free jet were measured using both a microparticle image velocimetry (µ-PIV) and a particle image velocimetry (PIV) system. Furthermore, the influence of the outlet geometry on the velocity profiles is investigated. Similar relationships were found on all investigated scales. The areas with the highest velocity fluctuations were identified where droplets are exposed to the highest turbulent forces. The Reynolds number had no influence on the normalized velocity fluctuation field. The confinement of the jet started to influence the velocity field if the outlet channel diameter is smaller than 10 times the diameter of the orifice. In conclusion, the scaling approach offers advantages to study very fast processes on very small spatial scales in detail. The presented scaling approach also offers chances in the optimization of the geometry of the disruption unit. However, the results also show challenges of each size scale, which can come from the respective production, measurement technology or experimental design. Depending on the problem to be investigated, we recommend conducting experimental studies at different scales

    Peripheral infusion of rat bone marrow derived endothelial progenitor cells leads to homing in acute lung injury

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Bone marrow-derived progenitors for both epithelial and endothelial cells have been observed in the lung. Besides mature endothelial cells (EC) that compose the adult vasculature, endothelial progenitor cells (EPC) are supposed to be released from the bone marrow into the peripheral blood after stimulation by distinct inflammatory injuries. Homing of <it>ex vivo </it>generated bone marrow-derived EPC into the injured lung has not been investigated so far. We therefore tested the hypothesis whether homing of EPC in damaged lung tissue occurs after intravenous administration.</p> <p>Methods</p> <p>Ex vivo generated, characterized and cultivated rat bone marrow-derived EPC were investigated for proliferation and vasculogenic properties in vitro. EPC were tested for their homing in a left-sided rat lung transplant model mimicking a severe acute lung injury. EPC were transplanted into the host animal by peripheral administration into the femoral vein (10<sup>6 </sup>cells). Rats were sacrificed 1, 4 or 9 days after lung transplantation and homing of EPC was evaluated by fluorescence microscopy. EPC were tested further for their involvement in vasculogenesis processes occurring in subcutaneously applied Matrigel in transplanted animals.</p> <p>Results</p> <p>We demonstrate the integration of intravenously injected EPC into the tissue of the transplanted left lung suffering from acute lung injury. EPC were localized in vessel walls as well as in destructed lung tissue. Virtually no cells were found in the right lung or in other organs. However, few EPC were found in subcutaneous Matrigel in transplanted rats.</p> <p>Conclusion</p> <p>Transplanted EPC may play an important role in reestablishing the endothelial integrity in vessels after severe injury or at inflamatory sites and might further contribute to vascular repair or wound healing processes in severely damaged tissue. Therapeutic applications of EPC transplantation may ensue.</p
    corecore