Nanorod Suprastructures from a Ternary Graphene Oxide-Polymer-CsPbX3 Perovskite Nanocrystal Composite That Display High Environmental Stability.

Despite the exceptional optoelectronic characteristics of the emergent perovskite nanocrystals, the ionic nature greatly limits their stability, and thus restricts their potential applications. Here we have adapted a self-assembly strategy to access a rarely reported nanorod suprastructure that provide excellent encapsulation of perovskite nanocrystals by polymer-grafted graphene oxide layers. Polyacrylic acid-grafted graphene oxide (GO-g-PAA) was used as a surface ligand during the synthesis of the CsPbX3 perovskite nanocrystals (NCs), yielding particles (5-12 nm) with tunable halide compositions that were homogeneously embedded in the GO-g-PAA matrix. The resulting NC-GO-g-PAA exhibits a higher photoluminescence quantum yield than previously reported encapsulated NCs while maintaining an easily tunable bandgap, allowing for emission spanning the visible spectrum. The NC-GO-g-PAA hybrid further self-assembles into well-defined nanorods upon solvent treatment. The resulting nanorod morphology imparts extraordinary chemical stability toward protic solvents such as methanol and water and much enhanced thermal stability. The introduction of barrier layers by embedding the perovskite NCs in the GO-g-PAA matrix, together with its unique assembly into nanorods, provides a novel strategy to afford robust perovskite emissive materials with environmental stability that may meet or exceed the requirement for optoelectronic applications

Long-Range Exciton Diffusion in Two-Dimensional Assemblies of Cesium Lead Bromide Perovskite Nanocrystals

F\"orster Resonant Energy Transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as a new optoelectronic design element to transport energy. However, so far nanocrystal (NC) systems supported only diffusion length of 30 nm, which are too small to be useful in devices. Here, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm2/s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (PNC). Exciton diffusion was directly measured via steady-state and time-resolved photoluminescence (PL) microscopy, with physical modeling providing deeper insight into the transport process. This exceptionally efficient exciton transport is facilitated by PNCs high PL quantum yield, large absorption cross-section, and high polarizability, together with minimal energetic and geometric disorder of the assembly. This FRET-mediated exciton diffusion length matches perovskites optical absorption depth, opening the possibility to design new optoelectronic device architectures with improved performances, and providing insight into the high conversion efficiencies of PNC-based optoelectronic devices

Low-dimensional perovskite nanoplatelet synthesis using in situ photophysical monitoring to establish controlled growth.

Perovskite nanoparticles have attracted the attention of research groups around the world for their impressive photophysical properties, facile synthesis and versatile surface chemistry. Here, we report a synthetic route that takes advantage of a suite of soluble precursors to generate CsPbBr3 perovskite nanoplatelets with fine control over size, thickness and optical properties. We demonstrate near unit cell precision, creating well characterized materials with sharp, narrow emission lines at 430, 460 and 490 nm corresponding to nanoplatelets that are 2, 4, and 6 unit cells thick, respectively. Nanoplatelets were characterized with optical spectroscopy, atomic force microscopy, scanning electron microscopy and transmission electron microscopy to explicitly correlate growth conditions, thickness and resulting photophysical properties. Detailed in situ photoluminescence spectroscopic studies were carried out to understand and optimize particle growth by correlating light emission with nanoplatelet growth across a range of synthetic conditions. It was found that nanoplatelet thickness and emission wavelength increase as the ratio of oleic acid to oleyl amine or the reaction temperature is increased. Using this information, we control the lateral size, width and corresponding emission wavelength of the desired nanoplatelets by modulating the temperature and ratios of the ligand

In Situ Observation of Degradation by Ligand Substitution in Small-Molecule Phosphorescent Organic Light-Emitting Diodes

Solutions of facial-tris­(1-phenylpyrazole)­Ir­(III) (<i>fac</i>-Ir­(ppz)₃), when dissolved in either <i>tert</i>-butyl isocyanide or in solid films of 2-naphthylisocyanide, undergo replacement of a ppz ligand by the isocyanide molecules after irradiation with UV light as demonstrated by liquid chromatograph mass spectrometer analysis. Similarly, solutions of Ir­(ppz)₃ and bathophenanthroline (BPhen) in CH₂Cl₂ or acetone-<i>d</i>₆ form a brightly emissive species, [Ir­(ppz)₂(Bphen)]⁺ when irradiated with UV light as established by optical, mass, and ¹H nuclear magnetic resonance spectroscopy. Electroluminescent data from blocked organic light-emitting diode (OLED) devices demonstrate that both <i>mer</i>- and <i>fac</i>-(Ir­(ppz)₃) dissociate a ligand and coordinate a neighboring BPhen molecule when the device is operated at moderate to high current levels. These experiments offer direct evidence of the dissociation of a metal–ligand bond and subsequent ligand substitution as a degradation pathway in active OLED devices during operation and provide a route to assay in situ the stability of future dopants

Nanorod Suprastructures from a Ternary Graphene Oxide-Polymer-CsPbX3 Perovskite Nanocrystal Composite That Display High Environmental Stability.

Despite the exceptional optoelectronic characteristics of the emergent perovskite nanocrystals, the ionic nature greatly limits their stability, and thus restricts their potential applications. Here we have adapted a self-assembly strategy to access a rarely reported nanorod suprastructure that provide excellent encapsulation of perovskite nanocrystals by polymer-grafted graphene oxide layers. Polyacrylic acid-grafted graphene oxide (GO-g-PAA) was used as a surface ligand during the synthesis of the CsPbX3 perovskite nanocrystals (NCs), yielding particles (5-12 nm) with tunable halide compositions that were homogeneously embedded in the GO-g-PAA matrix. The resulting NC-GO-g-PAA exhibits a higher photoluminescence quantum yield than previously reported encapsulated NCs while maintaining an easily tunable bandgap, allowing for emission spanning the visible spectrum. The NC-GO-g-PAA hybrid further self-assembles into well-defined nanorods upon solvent treatment. The resulting nanorod morphology imparts extraordinary chemical stability toward protic solvents such as methanol and water and much enhanced thermal stability. The introduction of barrier layers by embedding the perovskite NCs in the GO-g-PAA matrix, together with its unique assembly into nanorods, provides a novel strategy to afford robust perovskite emissive materials with environmental stability that may meet or exceed the requirement for optoelectronic applications

Templated self-assembly of one-dimensional CsPbX3 perovskite nanocrystal superlattices.

Ordered self-assembled arrays or superstructures of nanocrystals (NCs) have attracted intense research interest due to their ability to translate valuable nanoscale properties to larger length scales. Numerous techniques have been explored to induce self-assembly into various superstructures. Here we investigated a simple kinetic approach to form self-assembled one-dimensional perovskite CsPbX3 (X: halides) nanocrystal arrays templated inside a pod shaped inert lead sulfate (PbSO4) scaffold. Both the solvent effects, and the self-assembly process and mechanism, are systematically studied based on a uniform procedure developed to generate CsPbX3 nanocrystal superlattices with different sizes and compositions. The formation of one-dimensional (1D) chains of NCs within a half-cylindrical pod of PbSO4 reflects a balance between solvophobicity and solvophilicity of the components. By reducing the size of NCs, we successfully realized 2D superlattices with two or three rows of close-packed CsPbBr3 NCs, in addition to single string-of-pearl type 1D assemblies. The superlattices can be assembled both inside and outside of the half-cylindrical shells by regulating the reaction conditions. The self-assembly behavior is reminiscent of the host-guest systems of organic molecular species where supramolecular recognition rules apply to give well-defined complexes. The current study opens a door for controlling self-assembled nanostructures of CsPbX3 NCs, and provides an attainable platform for future optoelectronic devices