Electrical Response Using Nanotubes on a Fibrous Substrate

A device produces an electrical signal in response to a stimulus. The device is formed of a flexible substrate including a layer of fibers, for example, paper, and a solution of dispersed carbon nanotubes coated onto and within the fibers, the solution evaporated to leave carbon nanotubes intertwined within the layer of fibers. The carbon nanotubes are functionalized to be optimized for producing an electrical signal for a particular stimulus, where the stimulus includes exposure of the device to a particular gas or vapor. A number of such devices, some or all of which can be different, are housed together, for producing a complex electronic signal, or for sensing any of a wide variety of stimulus

Copper Nanowire Production for Interconnect Applications

A method of fabricating metallic Cu nanowires with lengths up to about 25 micrometers and diameters in a range 20-100 nanometers, or greater if desired. Vertically oriented or laterally oriented copper oxide structures (CuO and/or Cu2O) are grown on a Cu substrate. The copper oxide structures are reduced with 99+ percent H or H2, and in this reduction process the lengths decrease (to no more than about 25 micrometers), the density of surviving nanostructures on a substrate decreases, and the diameters of the surviving nanostructures have a range, of about 20-100 nanometers. The resulting nanowires are substantially pure Cu and can be oriented laterally (for local or global interconnects) or can be oriented vertically (for standard vertical interconnects)

θ-D Approximation Technique for Nonlinear Optimal Speed Control Design of Surface-Mounted PMSM Drives

This paper proposes nonlinear optimal controller and observer schemes based on a θ-D approximation approach for surface-mounted permanent magnet synchronous motors (PMSMs). By applying the θ-D method in both the controller and observer designs, the unsolvable Hamilton–Jacobi–Bellman equations are switched to an algebraic Riccati equation and statedependent Lyapunov equations (SDLEs). Then, through selecting the suitable coefficient matrices, the SDLEs become algebraic, so the complex matrix operation technique, i.e., the Kronecker product applied in the previous papers to solve the SDLEs is eliminated. Moreover, the proposed technique not only solves the problem of controlling the large initial states, but also avoids the excessive online computations. By utilizing a more accurate approximation method, the proposed control system achieves superior control performance (e.g., faster transient response, more robustness under the parameter uncertainties and load torque variations) compared to the state-dependent Riccati equation-based control method and conventional PI controlmethod. The proposed observer-based control methodology is tested with an experimental setup of a PMSM servo drive using a Texas Instruments TMS320F28335 DSP. Finally, the experimental results are shown for proving the effectiveness of the proposed control approac

Fabrication of a Silicon Nanowire on a Bulk Substrate by Use of a Plasma Etching and Total Ionizing Dose Effects on a Gate-All-Around Field-Effect Transistor

The gate all around transistor is investigated through experiment. The suspended silicon nanowire for the next generation is fabricated on bulk substrate by plasma etching method. The scallop pattern generated by Bosch process is utilized to form a floating silicon nanowire. By combining anisotropic and istropic silicon etch process, the shape of nanowire is accurately controlled. From the suspended nanowire, the gate all around transistor is demonstrated. As the silicon nanowire is fully surrounded by the gate, the device shows excellent electrostatic characteristics

Mems Nanotube Based Thermal Neutron Detector

A MEMS nanotube based radiation sensor that is low cost, low power, compact, reliable and is applicable across many fields and a method for fabricating such a sensor are described. Each sensor may be connected to an array of similar but distinct sensors that leverage different material sand nanotube technology to detect radiation

One Time Programmable Antifuse Memory Based on Bulk Junctionless Transistor

One time programmable (OTP) antifuse base memory is demonstrated based on a bulk junctionless gate-all-around (GAA) nanowire transistor technology. The presented memory consists of a single transistor (1T) footprint without any process modification. The source/drain (S/D) and gate respectively become bit line and word line where the antifuse is formed by oxide breakdown across the gate and the channel. The channel is connected directly to the bit line due to junctionless S/D and inherently isolated from the neighboring cell by the GAA channel. Therefore, an array of 1T antifuse OTP can be a candidate for the sub-5-nanometer technology node