Heat losses in a smouldering system: The key role of non-uniform air flux

Smouldering combustion is emerging as a valuable tool for energy conversion purposes. However, the effects of radial/lateral heat losses, while critical to its viability, are not well understood. It is known that heat losses weaken the smouldering reaction near the walls. It is less known that these losses generate non-uniform air flux across the system cross-section, potentially changing conversion rates and quenching limits. This study integrated: (i) highly instrumented smouldering experiments across numerous scales, (ii) a novel method of estimating non-uniform air flux in the experiments, (iii) analytical modelling to predict non-uniform cooling, and (iv) energy balance calculations to quantify the non-uniform heat of smouldering. Altogether, this work demonstrates that heat loss-induced non-uniform air flux is significant, affecting key smouldering propagation and cooling characteristics. The uniform air flux injected at the base became redistributed with a ~50% decrease at the centreline and a ~50% increase at the wall. This was shown to cause a concave (in the direction of air flow) smouldering front and a concave cooling front. The former was shown to cause radial heat transfer inwards, leading to super-adiabatic heating towards the centre of the reactor. The latter was shown to inhibit cooling along the centreline, which progressed ~40% slower than expected during propagation. Altogether, the multiple and integrated analyses used reveal the magnitude and significance of heat losses in smouldering systems. This insight is valuable to better harness smouldering for engineering applications

Heat losses in applied smouldering systems: Sensitivity analysis via analytical modelling

As applied smouldering systems gain popularity for a variety of energy conversion purposes, there is a strong interest in optimizing the reactor design to support robust smouldering. Heat losses play a critical role in the energy balance of smouldering systems, and therefore have strong implications toward understanding propagation limits and reactor design. Heat losses in an applied smouldering system were approximated by adapting the analytical model from Kuznetsov (1996), originally developed for unsteady local thermal non-equilibrium heat transfer in a porous cylinder, to simulate the cooling zone trailing the smouldering front. The analytical model was adapted to a smouldering system by solving on a domain that lengthens as the cooling zone expands at the rate of the smouldering velocity. The results are incorporated into a global energy balance on the smouldering system, thereby providing an inexpensive and rapid method to estimate the system energy efficiency. Confidence in the analytical model was provided by demonstrating its predictions compare well with existing experimental and numerical estimates of heat losses from similar smouldering systems. The model was then used to quantify the sensitivity of the heat losses to two key reactor design parameters: radius and insulation quality. The system energy efficiency was shown to be highly sensitive to improved insulation and increased radius up to ~0.1 m (i.e., laboratory-sized reactors). However, this sensitivity diminished with size. Beyond 0.4 m radius, the predicted system energy efficiency was high (~85-95%) and relatively insensitive to reactor radius and insulation quality. Therefore, commercial, batch treatment smouldering reactors do not need to be larger than 0.4 m in radius to protect against heat losses and maximize their energy efficiency. This threshold design radius is considerably less than used in current reactors and therefore can provide valuable cost savings

Evidence for frequent incest in a cooperatively breeding mammal.

As breeding between relatives often results in inbreeding depression, inbreeding avoidance is widespread in the animal kingdom. However, inbreeding avoidance may entail fitness costs. For example, dispersal away from relatives may reduce survival. How these conflicting selection pressures are resolved is challenging to investigate, but theoretical models predict that inbreeding should occur frequently in some systems. Despite this, few studies have found evidence of regular incest in mammals, even in social species where relatives are spatio-temporally clustered and opportunities for inbreeding frequently arise. We used genetic parentage assignments together with relatedness data to quantify inbreeding rates in a wild population of banded mongooses, a cooperatively breeding carnivore. We show that females regularly conceive to close relatives, including fathers and brothers. We suggest that the costs of inbreeding avoidance may sometimes outweigh the benefits, even in cooperatively breeding species where strong within-group incest avoidance is considered to be the norm

Understanding flame extinction in timber under external heating using high-activation energy asymptotics

The present study analyses the flame extinction of timber under different levels of external heating and oxygen contents in the surrounding atmosphere. An existing theoretical framework conceived initially for the analysis of a counter-flow diffusion flame established above the surface of a condensed fuel is extended for charring materials to deliver a fundamental understanding of the self-extinction of timber. This study shows that the energy balance at the burning surface is influenced primarily by the magnitude of external heating conditions, which directly influences the evolution of bulk properties such as flame temperature, location, and stagnation plane position. Variations in the oxygen content had a lesser influence over these bulk properties. For all investigated conditions, the limits of the strain rate range where a flame can be sustained were shown to vary substantially, and critical Damköhler number (Da) analyses were conducted. Blow-off at high strain rates (low Da) occurs for all investigated conditions. The value of this critical Da decreases when increasing either the magnitude of the external heating or the oxygen content as flame temperature increases. Quenching at low strain rates (high Da) is only found for sufficiently low magnitudes of external heating. There, the associated critical Da increases when increasing either the external heating or the oxygen content. Above a certain degree of external heating, the flame can be theoretically sustained even at infinitely-low strain rates. By comparing these results to experimental data, the experimental critical Da at quenching was found to behave like the theoretical results but with a lower sensitivity to variations in the parameters studied. To account for this discrepancy, a fuel dilution parameter is introduced to incorporate the complex dependencies of timber decomposition and surface reactions not captured by the theoretical framework

A simplified analytical model for radiation dominated ignition of solid fuels exposed to multiple non-steady heat fluxes

Heat fluxes from fires are strongly time-dependent. Historically, the thermal ignition theory in its classical form has neglected this time dependency until recent years, where theories have been developed to include time-varying incident heat fluxes. This article proposes a simplified general model formulation for the heating of solid fuels exposed to four different heat flux behaviors, considering the penetration of radiation into the medium. The incident heat flux cases developed where: Constant, Linear, Exponential and Polynomial, which represent different situations related to structural and wildland fires. The analytical models consider a spatially averaged medium temperature and exact and approximate solutions are presented, based on the critical ignition temperature criterion, which are valid for solids of any optical thickness. The results were validated by comparison with various models presented in the literature, where the model granted in this work was capable to adjust to all of them, especially when high heat fluxes are involved. Therefore, the proposed model acquires a significant engineering utility since it provides a single model to be used as a general and versatile tool to predict the ignition delay time in a manageable way for solid fuels exposed to different fire conditions

Elucidating the characteristic energy balance evolution in applied smouldering systems

Applied smouldering systems are emerging to solve a range of environmental challenges, such as remediation, sludge treatment, off-grid sanitation, and resource recovery. In many cases, these systems use smouldering to drive an efficient waste-to-energy process. While engineers and researchers are making strides in developing these systems, the characteristic energy balance trends have not yet been well-defined. This study addresses this topic and presents a detailed framework to uncover the characteristic energy balance evolution in applied smouldering systems. This work provides new experimental results; a new, validated analytical description of the cooling zone temperature profile at steady-state conditions; insight into the characteristic temperature changes over time; a re-analysis of published data; and a robust framework to contextualize the global energy balance results from applied smouldering systems. Altogether, this study is aimed to support researchers and engineers to better understand smouldering system performance to further the development of environmentally beneficial applications

Scaling up self-sustained smouldering of sewage sludge for waste-to-energy

Self-sustained smouldering combustion presents strong potential as a green waste-to-energy technique for a range of wastes, especially those with high moisture content like wastewater sewage sludge. While well-demonstrated in laboratory experiments, there is little known about scaling up this process to larger, commercial reactors. This paper addresses this knowledge gap by systematically conducting and analyzing experiments in a variety of reactors extending beyond the laboratory scale. This work reveals a robust treatment regime; however, it also identifies potential complications associated with perimeter heat losses at scale. Two key impacts, on the smouldering reactions and the air flow patterns, are shown to potentially degrade treatment if not properly understood and managed. Altogether, this study provides novel insight and guidance for scaling up smouldering science into practical, waste-to-energy systems

Developmental regulation of canonical and small ORF translation from mRNAs

Background: Ribosomal profiling has revealed the translation of thousands of sequences outside annotated protein-coding genes, including small open reading frames of less than 100 codons, and the translational regulation of many genes. Here we present an improved version of Poly-Ribo-Seq and apply it to Drosophila melanogaster embryos to extend the catalog of in vivo translated small ORFs, and to reveal the translational regulation of both small and canonical ORFs from mRNAs across embryogenesis. Results: We obtain highly correlated samples across five embryonic stages, with nearly 500 million putative ribosomal footprints mapped to mRNAs, and compare them to existing Ribo-Seq and proteomic data. Our analysis reveals, for the first time in Drosophila, footprints mapping to codons in a phased pattern, the hallmark of productive translation. We propose a simple binomial probability metric to ascertain translation probability. Our results also reveal reproducible ribosomal binding apparently not resulting in productive translation. This non-productive ribosomal binding seems to be especially prevalent amongst upstream short ORFs located in the 5′ mRNA leaders, and amongst canonical ORFs during the activation of the zygotic translatome at the maternal-to zygotic transition. Conclusions: We suggest that this non-productive ribosomal binding might be due to cis-regulatory ribosomal binding and to defective ribosomal scanning of ORFs outside periods of productive translation. Our results are compatible with the main function of upstream short ORFs being to buffer the translation of canonical canonical ORFs; and show that, in general, small ORFs in mRNAs display markers compatible with an evolutionary transitory state towards full coding function

CAMBIO DE COBERTURA Y USO DEL SUELO EN LA CUENCA DEL RIO MOLOLOA, NAYARIT

Los cambios de cobertura y uso del suelo se han reconocido en muchos países como una de las principales causas de deterioro ambiental, por ello están ubicados en el centro de la investigación ambiental y representan un punto importante en diferentes ámbitos como medio para entender los mecanismos de este proceso de deterioro y guía para la toma razo- nable de decisiones sobre el uso del territorio. En el estado de Nayarit, la cuenca del río Mo- loloa ha proveído de un conjunto de bienes y servicios a las localidades que involucra; des- afortunadamente, esta relación ha repercutido en un deterioro acelerado de sus recursos na- turales. En este trabajo se analizan los cambios de cobertura y uso del suelo en la cuenca del río Mololoa, entre 1995 y 2005, a partir de la interpretación de ortofotos digitales y manejo de la información en un SIG. Los resultados muestran que el paisaje de la cuenca está dominado en 83.01% por la vegetación natural y tierras de cultivo. La dinámica de cambio está centrada en los tipos de cobertura “vegetación natural” y “construcciones”, la primera disminuye a una tasa de 41.67 ha/año, y la segunda, aumenta 74.86 ha/año. La tasa de deforestación de los bosques y selvas de la región fue de 0.1 y 0.36%, menor a las reportadas por diferentes autores a nivel nacional y estatal