170 research outputs found

    The influence of accuracy constraints on EMG and kinetic variables during gait initiation

    Get PDF
    [Purpose] This study investigated the effects of accuracy constraints (targets) placed on the steppinglimb heel-strike (HS) on the electromyogram (EMG) and ground reaction forces (GRFs) during gait initiation. [Subjects and Methods] Twenty healthy subjects (29.2 ± 2.9 years) were asked to begin walking or stepping over a 10-cm-high obstacle at a fast speed. A 3-cm-diameter target was placed on the ground to dictate the position and accuracy of the stepping-limb HS. [Results] The results showed that the initiation velocity increase in the no-target conditions was due to modulation of the stance- and stepping-limb GRFs and a corresponding increase in the tibialis anterior (TA) activities of both limbs before stepping-limb toe-off. This was achieved by significantly increasing the stepping- and stance-limb TAEMG1 (determined between the onset of movement and time to peak anteroposterior (A-P) GRF of the stepping- and stance- limb) for the no-target conditions. It seems, therefore, that TAEMG1 and the slope to stepping-limb peak A-P GRF contributed to the intended velocity of initiation. [Conclusion] These data indicate that gait initiation and/or stepping over an obstacle may prove to be tasks by which motor control can be measured. The present study provides insight into the working mechanisms of the stepping and stance limbs and shows a clear need to further investigate whether the intact or affected limb should be used to initiate gait during rehabilitation and prosthetic training

    Paper on a disc: balancing the capillary-driven flow with a centrifugal force

    Get PDF
    This paper describes the active control of the capillary-driven flow in paper using a centrifugal device.close191

    Charge-spin correlation in van der Waals antiferromagenet NiPS3

    Get PDF
    Strong charge-spin coupling is found in a layered transition-metal trichalcogenide NiPS3, a van derWaals antiferromagnet, from our study of the electronic structure using several experimental and theoretical tools: spectroscopic ellipsometry, x-ray absorption and photoemission spectroscopy, and density-functional calculations. NiPS3 displays an anomalous shift in the optical spectral weight at the magnetic ordering temperature, reflecting a strong coupling between the electronic and magnetic structures. X-ray absorption, photoemission and optical spectra support a self-doped ground state in NiPS3. Our work demonstrates that layered transition-metal trichalcogenide magnets are a useful candidate for the study of correlated-electron physics in two-dimensional magnetic material.Comment: 6 pages, 3 figur

    Right sizes of nano- and microstructures for high-performance and rigid bulk thermoelectrics

    Get PDF
    In this paper, we systematically investigate three different routes of synthesizing 2% Na-doped PbTe after melting the elements: (i) quenching followed by hot-pressing (QH), (ii) annealing followed by hot-pressing, and (iii) quenching and annealing followed by hot-pressing. We found that the thermoelectric figure of merit, zT, strongly depends on the synthesis condition and that its value can be enhanced to similar to 2.0 at 773 K by optimizing the size distribution of the nanostructures in the material. Based on our theoretical analysis on both electron and thermal transport, this zT enhancement is attributed to the reduction of both the lattice and electronic thermal conductivities; the smallest sizes (2 similar to 6 nm) of nanostructures in the QH sample are responsible for effectively scattering the wide range of phonon wavelengths to minimize the lattice thermal conductivity to similar to 0.5 W/m K. The reduced electronic thermal conductivity associated with the suppressed electrical conductivity by nanostructures also helped reduce the total thermal conductivity. In addition to the high zT of the QH sample, the mechanical hardness is higher than the other samples by a factor of around 2 due to the smaller grain sizes. Overall, this paper suggests a guideline on how to achieve high zT and mechanical strength of a thermoelectric material by controlling nano-and microstructures of the material

    A standardized extract of Rhynchosia volubilis Lour. exerts a protective effect on benzalkonium chloride-induced mouse dry eye model

    Get PDF
    ETHNOPHARMACOLOGICAL RELEVANCE In contrast to other leguminous plants generally used as food, Rhynchosia volubilis Loureiro, a small soybean with a black seed coat, has been used as a traditional oriental remedy for various human diseases in Eastern Asia. In this study, we demonstrated the protective effect of R. volubilis against dry eye disease. AIM OF THE STUDY We aimed to investigate whether a standardized ethanol extract of R. volubilis (EERV) can protect the cornea in a benzalkonium chloride (BAC)-induced mouse dry eye model. MATERIALS AND METHODS Experimental dry eye was induced by the instillation of 0.2% BAC on mouse cornea. A standardized ethanol extract of R. volubilis (EERV) was orally administered following BAC treatment. The positive control group was treated with commercial eye drops. Fluorescein staining, tear break-up time (BUT), and hematoxylin and eosin staining were evaluated on the ocular surface. Squamous metaplasia and apoptosis in the corneal epithelial layer were detected by immunostaining. Furthermore, the protein expression of cytochrome c, Bcl-2, and Bax was determined. RESULTS EERV treatment significantly improved fluorescein scoring, BUT, and smoothness in the cornea compared to the vehicle group. In addition, EERV inhibited squamous metaplasia and apoptosis in the cornea. The expression of cytochrome c and Bax was upregulated, while that of Bcl-2 was downregulated in the vehicle group compared with that in the control group. However, EERV treatment inhibited the expression of cytochrome c and Bax, while that of Bcl-2 was improved. CONCLUSION Standardized EERV could be a beneficial candidate for the treatment of dry eye disease

    Meniscus-Guided Micro-Printing of Prussian Blue for Smart Electrochromic Display

    Get PDF
    Using energy-saving electrochromic (EC) displays in smart devices for augmented reality makes cost-effective, easily producible, and efficiently operable devices for specific applications possible. Prussian blue (PB) is a metal-organic coordinated compound with unique EC properties that limit EC display applications due to the difficulty in PB micro-patterning. This work presents a novel micro-printing strategy for PB patterns using localized crystallization of FeFe(CN)(6) on a substrate confined by the acidic-ferric-ferricyanide ink meniscus, followed by thermal reduction at 120 degrees C, thereby forming PB. Uniform PB patterns can be obtained by manipulating printing parameters, such as the concentration of FeCl3 center dot K3Fe(CN)(6), printing speed, and pipette inner diameter. Using a 0.1 M KCl (pH 4) electrolyte, the printed PB pattern is consistently and reversibly converted to Prussian white (CV potential range: -0.2-0.5 V) with 200 CV cycles. The PB-based EC display with a navigation function integrated into a smart contact lens is able to display directions to a destination to a user by receiving GPS coordinates in real time. This facile method for forming PB micro-patterns could be used for advanced EC displays and various functional devices

    Combination therapy of disseminated coccidioidomycosis with caspofungin and fluconazole

    Get PDF
    BACKGROUND: The current recommended therapy for diffuse coccidioidal pneumonia involves initial treatment with amphotericin B deoxycholate or high-dose fluconazole, followed by an azole after clinical improvement. Amphotericin B is more frequently used as initial therapy if the patient's deterioration is rapid. CASE PRESENTATION: A 31-year-old Korean male with coccidioidomycosis presented to the hospital with miliary infiltrates on chest X-ray (CXR) and skin rash on the face and trunk. Initially, the patient did not respond to amphotericin B deoxycholate therapy. However, following caspofungin and fluconazole combination therapy, the patient showed favourable radiological, serological, and clinical response. CONCLUSION: This appears to be the first case of diffuse coccidioidal pneumonia with skin involvement in an immunocompetent patient who was treated successfully with caspofungin and fluconazole. Combination therapy with caspofungin and fluconazole may, therefore, be an alternative treatment for diffuse coccidioidal pneumonia that does not respond to amphotericin B deoxycholate therapy
    corecore