54 research outputs found
Dynamic response of single crystalline copper subjected to quasi-isentropic laser and gas-gun driven loading
Single crystalline copper was subjected to quasi-isentropic compression via gas-gun and laser loading at pressures between 18 GPa and 59 GPa. The deformation substructure was analyzed via transmission electron microscopy (TEM). Twins and laths were evident at the highest pressures, and stacking faults and dislocation cells in the intermediate and lowest pressures, respectively. The Preston-Tonks-Wallace (PTW) constitutive description was used to model the slip-twinning process in both cases
Recommended from our members
Dynamic Response of Copper Subjected to Quasi-Isentropic, Gas-Gun Driven Loading
A transmission electron microscopy study of quasi-isentropic high-pressure loading (peak pressures between 18 GPa and 52 GPa) of polycrystalline and monocrystalline copper was carried out. Deformation mechanisms and defect substructures at different pressures were analyzed. Current evidence suggests a deformation substructure consisting of twinning at the higher pressures and heavily dislocated laths and dislocation cells at the intermediate and lower pressures, respectively. Evidence of stacking faults at the intermediate pressures was also found. Dislocation cell sizes decreased with increasing pressure and increased with distance away from the surface of impact
Recommended from our members
Dynamic Response of Single Crystalline Copper Subjected to Quasi-Isentropic, Gas-Gun Driven Loading
A transmission electron microscopy study of quasi-isentropic gas-gun loading (peak pressures between 18 GPa and 52 GPa) of [001] monocrystalline copper was carried out. The defect substructures at these different pressures were analyzed. Current experimental evidence suggests a deformation substructure that transitions from slip to twinning, where twinning occurs at the higher pressures ({approx}52 GPa), and heavily dislocated laths and dislocation cells take place at the intermediate and lower pressures. Evidence of stacking faults at the intermediate pressures was also found. Dislocation cell sizes decreased with increasing pressure and increased with distance away from the surface of impact. The results from the quasi-isentropic experiments are compared with that of flyer-plate and laser shock experiments carried out by Cao et al. [1] and Schneider et al. [2], respectively. The Preston-Tonks-Wallace and Zerilli-Armstrong constitutive descriptions are used to model both isentropic and shock compression experiments and predict the pressure at which the slip-twinning transition occurs in both cases. Both models predict a higher transition for isentropic then for shock experiments, and indeed, that twinning should not take place in the ICE experiments at the pressures investigated
Recommended from our members
Deformation Substructures and Their Transitions in Laser Shock-Compressed Copper-Aluminum Alloys
It is shown that the short pulse durations (0.1-10 ns) in laser shock compression ensure a rapid decay of the pulse and quenching of the shocked sample in times that are orders of magnitude lower than in conventional explosively driven plate impact experiments. Thus, laser compression, by virtue of a much more rapid cooling, enables the retention of a deformation structure closer to the one existing during shock. The smaller pulse length also decreases the propensity for localization. Copper and copper aluminum (2 and 6 wt% Al) with orientations [001] and [{bar 1}34] were subjected to high intensity laser pulses with energy levels of 70 to 300 J delivered in an initial pulse duration of approximately 3 ns. The [001] and [{bar 1}34] orientations were chosen since they respectively maximize and minimize the number of slip systems with highest resolved shear stresses. Systematic differences of the defect substructure were observed as a function of pressure, stacking-fault energy and crystalline orientation. The changes in the mechanical properties for each condition were compared using micro- and nano-hardness measurements and correlated well with observations of the defect substructure. Three regimes of plastic deformation were identified and their transitions modeled: dislocation cells, stacking-faults, and twins. An existing constitutive description of the slip to twinning transition, based on the critical shear stress, was expanded to incorporate the effect of stacking-fault energy. A new physically-based criterion accounting for stacking-fault energy was developed that describes the transition from perfect loop to partial loop homogeneous nucleation, and consequently from cells to stacking-faults. These calculations predict transitions that are in qualitative agreement with the effect of SFE
Recommended from our members
Studies of dynamic properties of shock compressed single crystals by in situ dynamic x-ray diffraction and sample recovery
Laser compression provides pressures ranging from a few to hundreds of GPa at pulse durations of the order of nanoseconds or fractions thereof. The short duration ensures a rapid decay of the pulse and quenching of shocked sample in times that are orders of magnitude lower than in conventional explosively driven plate impact experiments. Systematic experiments carried out in specimens well suited for transmission electron microscopy characterization are revealing that laser compression, by virtue of a much more rapid cooling, enables the retention of a deformation structure closer to the one existing during shock. The smaller pulse length decreases the propensity for localization. Copper and copper aluminum (2 and 6 wt% Al) with orientations [001] and [ ] were subjected to high intensity laser pulses with energy levels of 70 to 300 J delivered in a pulse duration of approximately 3 ns. Systematic differences of the defect substructure were observed as a function of pressure and stacking fault energy. The changes in the mechanical properties for each condition were compared using micro- and nano-hardness measurements and correlated well with observations of the defect substructure. Three regimes of plastic deformation were identified and their transitions modeled: dislocation cells, stacking faults, and twins. An existing constitutive description of the slip to twinning transition, based on the critical shear stress, was expanded to incorporate the effect of stacking-fault energy. A new physically-based criterion accounting for stacking fault energy was developed that describes the transition from perfect loop to partial loop homogeneous nucleation, and consequently from cells to stacking faults. These calculations predict transitions that are in qualitative agreement with the effect of SFE
Recommended from our members
Experiments for the Validation of Debris and Shrapnel Calculations
The debris and shrapnel generated by laser targets are important factors in the operation of a large laser facility such as NIF, LMJ, and Orion. Past experience has shown that it is possible for such target debris to render diagnostics inoperable and also to penetrate or damage optical protection (debris) shields. We are developing the tools to allow evaluation of target configurations in order to better mitigate the generation and impact of debris, including development of dedicated modeling codes. In order to validate these predictive simulations, we briefly describe a series of experiments aimed at determining the amount of debris and/or shrapnel produced in controlled situations. We use glass and aerogel to capture generated debris/shrapnel. The experimental targets include hohlraums (halfraums) and thin foils in a variety of geometries. Post-shot analysis includes scanning electron microscopy and x-ray tomography. We show the results of some of these experiments and discuss modeling efforts
- …