Defect Tolerance to Intolerance in the Vacancy-Ordered Double Perovskite Semiconductors Cs2SnI6 and Cs2TeI6.

Vacancy-ordered double perovskites of the general formula A2BX6 are a family of perovskite derivatives composed of a face-centered lattice of nearly isolated [BX6] units with A-site cations occupying the cuboctahedral voids. Despite the presence of isolated octahedral units, the close-packed iodide lattice provides significant electronic dispersion, such that Cs2SnI6 has recently been explored for applications in photovoltaic devices. To elucidate the structure-property relationships of these materials, we have synthesized solid-solution Cs2Sn1-xTexI6. However, even though tellurium substitution increases electronic dispersion via closer I-I contact distances, the substitution experimentally yields insulating behavior from a significant decrease in carrier concentration and mobility. Density functional calculations of native defects in Cs2SnI6 reveal that iodine vacancies exhibit a low enthalpy of formation, and that the defect energy level is a shallow donor to the conduction band rendering the material tolerant to these defect states. The increased covalency of Te-I bonding renders the formation of iodine vacancy states unfavorable and is responsible for the reduction in conductivity upon Te substitution. Additionally, Cs2TeI6 is intolerant to the formation of these defects, because the defect level occurs deep within the band gap and thus localizes potential mobile charge carriers. In these vacancy-ordered double perovskites, the close-packed lattice of iodine provides significant electronic dispersion, while the interaction of the B- and X-site ions dictates the properties as they pertain to electronic structure and defect tolerance. This simplified perspective based on extensive experimental and theoretical analysis provides a platform from which to understand structure-property relationships in functional perovskite halides

Activity and T-maze Performance of the White Rat as a Function of Drive and Apparatus

[From the Introduction] In the usual psychological experiment certain operations are performed upon the organisms being studied and a certain portion of the total responses are measured. The operations performed upon the organism may be roughly divided into two classes, those which are systematically varied and define the various experi mental groups, and those which are held constant across groups. Certain lawful relationships are then determined between those operations which are varied and the responses measured. Those operations which are held constant are considered to be factors which may also affect the responses being measured. It is usually felt that if these are held constant, then they will affect all groups equally and will not contaminate the results.­ The assumption here is that what is constant for the experimenter is constant for the various organisms. For example, in a T-maze problem, if the effect of several levels of hunger are being studied, the same maze is used with all groups, and it is assumed that the maze dimensions are constant for all groups. It may well be, however, that a given maze dimension may differentially affect animals at different hunger levels. If, at each hunger level, we use two mazes of differing lengths and find that the results obtained from one maze are parallel to the results obtained from the other, then we may assume that a condition of constancy exists. In some cases it will be obvious that such a condition of constancy does exist in the experiment, but in others this condition should be tested before the inferences are generalizable. It is to be noticed that the condition of con­stancy is defined by an a priori choice of the response of the organism to be measured. It may well be that if one does get results which appear to support a condition of constancy, it would not have been obtained had another response of the organism been measured. Therefore, one must use care in choosing which response of the organism he is going to measure. In the experiments to be reported on in this paper, close attention was paid to the effect of certain of the operations which in previous experiments have been con­sidered under the class of constant operations. In the activity experiment, attention was focused on the effect of the apparatus used in measuring the activity, and in the T-Maze experiment, attention was focused upon a certain training procedure that has been used in many learning experiments in the past

Plasmons in coupled bilayer structures

We calculate the collective charge density excitation dispersion and spectral weight in bilayer semiconductor structures {\it including effects of interlayer tunneling}. The out-of-phase plasmon mode (the ``acoustic'' plasmon) develops a long wavelength gap in the presence of tunneling with the gap being proportional to the square root (linear power) of the tunneling amplitude in the weak (strong) tunneling limit. The in-phase plasmon mode is qualitatively unaffected by tunneling. The predicted plasmon gap should be a useful tool for studying many-body effects.Comment: 10 pages, 6 figures. to appear in Phys. Rev. Let

Mobility of thorium ions in liquid xenon

We present a measurement of the $^{226}$Th ion mobility in LXe at 163.0 K and 0.9 bar. The result obtained, 0.240$\pm$0.011 (stat) $\pm$0.011 (syst) cm$^{2}$/(kV-s), is compared with a popular model of ion transport.Comment: 6.5 pages,

The development and application of a new tool to assess the adequacy of the content and timing of antenatal care

Abstract Background: Current measures of antenatal care use are limited to initiation of care and number of visits. This study aimed to describe the development and application of a tool to assess the adequacy of the content and timing of antenatal care. Methods: The Content and Timing of care in Pregnancy (CTP) tool was developed based on clinical relevance for ongoing antenatal care and recommendations in national and international guidelines. The tool reflects minimal care recommended in every pregnancy, regardless of parity or risk status. CTP measures timing of initiation of care, content of care (number of blood pressure readings, blood tests and ultrasound scans) and whether the interventions were received at an appropriate time. Antenatal care trajectories for 333 pregnant women were then described using a standard tool (the APNCU index), that measures the quantity of care only, and the new CTP tool. Both tools categorise care into 4 categories, from ‘Inadequate’ (both tools) to ‘Adequate plus’ (APNCU) or ‘Appropriate’ (CTP). Participants recorded the timing and content of their antenatal care prospectively using diaries. Analysis included an examination of similarities and differences in categorisation of care episodes between the tools. Results: According to the CTP tool, the care trajectory of 10,2% of the women was classified as inadequate, 8,4% as intermediate, 36% as sufficient and 45,3% as appropriate. The assessment of quality of care differed significantly between the two tools. Seventeen care trajectories classified as ‘Adequate’ or ‘Adequate plus’ by the APNCU were deemed ‘Inadequate’ by the CTP. This suggests that, despite a high number of visits, these women did not receive the minimal recommended content and timing of care. Conclusions: The CTP tool provides a more detailed assessment of the adequacy of antenatal care than the current standard index. However, guidelines for the content of antenatal care vary, and the tool does not at the moment grade over-use of interventions as ‘Inappropriate’. Further work needs to be done to refine the content items prior to larger scale testing of the impact of the new measure

A magnetically-driven piston pump for ultra-clean applications

A magnetically driven piston pump for xenon gas recirculation is presented. The pump is designed to satisfy extreme purity and containment requirements, as is appropriate for the recirculation of isotopically enriched xenon through the purification system and large liquid xenon TPC of EXO-200. The pump, using sprung polymer gaskets, is capable of pumping more than 16 standard liters per minute (SLPM) of xenon gas with 750 torr differential pressure.Comment: 6 pages, 5 figure

The EXO-200 detector, part I: Detector design and construction

EXO-200 is an experiment designed to search for double beta decay of $^{136}$Xe with a single-phase, liquid xenon detector. It uses an active mass of 110 kg of xenon enriched to 80.6% in the isotope 136 in an ultra-low background time projection chamber capable of simultaneous detection of ionization and scintillation. This paper describes the EXO-200 detector with particular attention to the most innovative aspects of the design that revolve around the reduction of backgrounds, the efficient use of the expensive isotopically enriched xenon, and the optimization of the energy resolution in a relatively large volume

The Role of Cellulosic Ethanol in Transportation

Petroleum provides essentially all of the energy used today in the transportation sector. To reduce this dependence on fossil energy, other fuels are beginning to be used, notably ethanol and biodiesel. Almost all fuel ethanol is produced by the conversion of corn grain to starch with subsequent fermentation to ethanol. In 2006, almost 5 billion gallons of fuel ethanol were produced, which used 17% of domestic corn production. The DOE has a goal to displace 30% of motor gasoline demand or 60 billion gallons per year by 2030. To achieve this goal, production of ethanol from lignocellulosic sources (e.g., agricultural residues, forest residues, and dedicated energy crops) is needed. This paper will describe the production of cellulosic ethanol as well as the issues and benefits associated with its production

Fixation of aqueous tritiated waste in polymer impregnated concrete and in polyacetylene

Tritiated aqueous waste can be used to hydrate hydraulic cement producing a concrete that contains a network of interconnected porosity. Such a product is subject to water intrusion and subsequent tritium loss by leaching and exchange. Techniques have been developed to impregnate this porosity with styrene monomer which is then polymerized in situ, resulting in a concrete that is essentially impermeable while its strength, durability, and resistance to chemical attack are significantly improved. Tritium bulk leach rates as low as 1.68 x 10$sup -4$ g/(cm$sup 2$-day) have been measured for polymer-impregnated concrete in water. An adsorbent additive can be incorporated to increase the specific tritiated waste loading of the concrete. Depending upon the formulations, these composites incorporate 5.8 to 8.3 liters HTO per cubic foot. Tritiated aqueous waste can also be fixed in polymeric form as polyacetylene through reaction with calcium carbide to form tritiated acetylene which is subsequently polymerized. Acetylene polymerization is accomplished by either $sup 60$Co gamma irradiation or thermal catalysis over cupric oxide. The tritiated polyacetylene produced can contain up to 50 atomic percent tritium and is essentially non-leachable, insoluble, thermally stable to 325$sup 0$C, and chemically inert. The bulk leach rate of tritiated polyacetylene was determined to be of the order of 1.8 x 10$sup -8$ g/(cm$sup 2$-day). Radiolysis by $sup 60$Co gamma irradiation results in a G value for hydrogen production of 0.15 molecules/100 eV. Tritiated polyacetylene can be incorporated as an aggregate in concrete, polymer concrete, or polymer impregnated concrete to form a monolithic solid. (auth

Young and Intermediate-age Distance Indicators

Distance measurements beyond geometrical and semi-geometrical methods, rely mainly on standard candles. As the name suggests, these objects have known luminosities by virtue of their intrinsic proprieties and play a major role in our understanding of modern cosmology. The main caveats associated with standard candles are their absolute calibration, contamination of the sample from other sources and systematic uncertainties. The absolute calibration mainly depends on their chemical composition and age. To understand the impact of these effects on the distance scale, it is essential to develop methods based on different sample of standard candles. Here we review the fundamental properties of young and intermediate-age distance indicators such as Cepheids, Mira variables and Red Clump stars and the recent developments in their application as distance indicators.Comment: Review article, 63 pages (28 figures), Accepted for publication in Space Science Reviews (Chapter 3 of a special collection resulting from the May 2016 ISSI-BJ workshop on Astronomical Distance Determination in the Space Age