The effect of Mg location on Co-Mg-Ru/γ-Al2O3 Fischer–Tropsch catalysts

© 2016 The Author(s) Published by the Royal Society. All rights reserved.The effectiveness of Mg as a promoter of Co-Ru/γ-Al2O3 Fischer-Tropsch catalysts depends on how and when the Mg is added. When the Mg is impregnated into the support before the Co and Ru addition, some Mg is incorporated into the support in the form of MgxAl2O3+x if the material is calcined at 550°C or 800°C after the impregnation, while the remainder is present as amorphous MgO/MgCO3 phases. After subsequent Co-Ru impregnation MgxCo3-xO4 is formed which decomposes on reduction, leading to Co(0) particles intimately mixed with Mg, as shown by high-resolution transmission electron microscopy. The process of impregnating Co into an Mg-modified support results in dissolution of the amorphous Mg, and it is this Mg which is then incorporated into MgxCo3-xO4. Acid washing or higher temperature calcination after Mg impregnation can remove most of this amorphous Mg, resulting in lower values of x in MgxCo3-xO4. Catalytic testing of these materials reveals that Mg incorporation into the Co oxide phase is severely detrimental to the site-Time yield, while Mg incorporation into the support may provide some enhancement of activity at high temperature

Southern Africa Consortium for Research Excellence (SACORE): successes and challenges

Copyright © Mandala et al. Open access article distributed under the terms of CC BY.Published Online November 13, 2014 http://dx.doi.org/10.1016/S2214-109X(14)70321-

Outbreak of Aeromonas hydrophila wound infections association with mud football

On 16 February 2002, a total of 26 people presented to the emergency department of the local hospital in the rural town of Collie in southwest Western Australia with many infected scratches and pustules distributed over their bodies. All of the patients had participated in a “mud football” competition the previous day, in which there had been 100 participants. One patient required removal of an infected thumbnail, and another required surgical debridement of an infected toe. Aeromonas hydrophila was isolated from all 3 patients from whom swab specimens were obtained. To prepare the mud football fields, a paddock was irrigated with water that was pumped from an adjacent river during the 1-month period before the competition. A. hydrophila was subsequently isolated from a water sample obtained from the river. This is the first published report of an outbreak of A. hydrophila wound infections associated with exposure to mud.Hassan Vally, Amanda Whittle, Scott Cameron, Gary K. Dowse and Tony Watso

Effects of air pollution and the introduction of the London Low Emission Zone on the prevalence of respiratory and allergic symptoms in schoolchildren in East London: a sequential cross-sectional study

The adverse effects of traffic-related air pollution on children’s respiratory health have been widely reported, but few studies have evaluated the impact of traffic-control policies designed to reduce urban air pollution. We assessed associations between traffic-related air pollutants and respiratory/allergic symptoms amongst 8–9 year-old schoolchildren living within the London Low Emission Zone (LEZ). Information on respiratory/allergic symptoms was obtained using a parent-completed questionnaire and linked to modelled annual air pollutant concentrations based on the residential address of each child, using a multivariable mixed effects logistic regression analysis. Exposure to traffic-related air pollutants was associated with current rhinitis: NOx (OR 1.01, 95% CI 1.00–1.02), NO2 (1.03, 1.00–1.06), PM10 (1.16, 1.04–1.28) and PM2.5 (1.38, 1.08–1.78), all per μg/m3 of pollutant, but not with other respiratory/allergic symptoms. The LEZ did not reduce ambient air pollution levels, or affect the prevalence of respiratory/allergic symptoms over the period studied. These data confirm the previous association between traffic-related air pollutant exposures and symptoms of current rhinitis. Importantly, the London LEZ has not significantly improved air quality within the city, or the respiratory health of the resident population in its first three years of operation. This highlights the need for more robust measures to reduce traffic emissions

TECHNETIUM SORPTION MEDIA REVIEW

This report presents information and references to aid in the selection of 99Tc sorption media for feasibility studies regarding the removal of 99Tc from Hanford's low activity waste. The report contains literature search material for sorption media (including ion exchange media) for the most tested media to date, including SuperLig 639, Reillex HPQ, TAM (Kruion), Purolite A520E and A530E, and Dowex 1X8. The U.S. Department of Energy (DOE), Office of River Protection (ORP) is responsible for management and completion of the River Protection Project (RPP) mission, which comprises both the Hanford Site tank farms and the Waste Treatment and Immobilization Plant (WTP). The RPP mission is to store, retrieve and treat Hanford's tank waste; store and dispose of treated wastes; and close the tank farm waste management areas and treatment facilities in a safe, environmentally compliant, cost-effective and energy-effective manner

Effect of the filament discharge current on the microstructure and performance of plasma-enhanced magnetron sputtered TiN coatings

© 2017 Elsevier B.V. Titanium nitride (TiN) coatings were synthesized by plasma-enhanced magnetron sputtering (PEMS) on 316L austenitic stainless steel and YG8 cemented carbide substrates. The plasma enhancement process involved the use of hot filaments as additional sources of electrons for the magnetron discharge. The structural, morphology, crystallinity, thickness, abrasion resistance and adhesion of the TiN coatings, as well as the nanohardness and Young's modulus were investigated at different filament discharge currents. The results showed that with increasing discharge current, the deposition rate of the coating decreased, the structural morphology of the TiN coatings became finer and denser and the columnar grain size decreased. The critical load for failure in scratch adhesion tests of the coatings on stainless steel and YG8 substrates were over 22 N and 141 N, respectively. The nanohardness and Young's modulus both improved significantly from 8 GPa and 200 GPa to 38 GPa and 500 GPa, respectively, after the discharge current increased from 6 A up to 12 A. The adhesion and the abrasion resistance of the coating on cemented carbide increased, and those on stainless steel decreased, with increasing filament discharge current. It was found that matching the Young's modulus of the coating to that of the substrate was important to improve the adhesion and abrasion resistance of the coating. The results demonstrate that TiN coatings can be prepared by PEMS at appropriate filament discharge currents, resulting in coatings with uniform thickness, dense structure and high hardness, abrasion resistance and adhesion

Sequential Effects in Judgements of Attractiveness: The Influences of Face Race and Sex

In perceptual decision-making, a person’s response on a given trial is influenced by their response on the immediately preceding trial. This sequential effect was initially demonstrated in psychophysical tasks, but has now been found in more complex, real-world judgements. The similarity of the current and previous stimuli determines the nature of the effect, with more similar items producing assimilation in judgements, while less similarity can cause a contrast effect. Previous research found assimilation in ratings of facial attractiveness, and here, we investigated whether this effect is influenced by the social categories of the faces presented. Over three experiments, participants rated the attractiveness of own- (White) and other-race (Chinese) faces of both sexes that appeared successively. Through blocking trials by race (Experiment 1), sex (Experiment 2), or both dimensions (Experiment 3), we could examine how sequential judgements were altered by the salience of different social categories in face sequences. For sequences that varied in sex alone, own-race faces showed significantly less opposite-sex assimilation (male and female faces perceived as dissimilar), while other-race faces showed equal assimilation for opposite- and same-sex sequences (male and female faces were not differentiated). For sequences that varied in race alone, categorisation by race resulted in no opposite-race assimilation for either sex of face (White and Chinese faces perceived as dissimilar). For sequences that varied in both race and sex, same-category assimilation was significantly greater than opposite-category. Our results suggest that the race of a face represents a superordinate category relative to sex. These findings demonstrate the importance of social categories when considering sequential judgements of faces, and also highlight a novel approach for investigating how multiple social dimensions interact during decision-making

Air pollution, ethnicity and telomere length in east London schoolchildren: An observational study

This study was funded/supported by the National Institute for Health Research (NIHR) Biomedical Research Centre based at Guy's and St Thomas' NHS Foundation Trust and King's College London, Dr. and Mrs. Lee Iu Cheung Fund, and Hackney Primary Care Trust (PCT)

Identification of a novel type of spacer element required for imprinting in fission yeast

Asymmetrical segregation of differentiated sister chromatids is thought to be important for cellular differentiation in higher eukaryotes. Similarly, in fission yeast, cellular differentiation involves the asymmetrical segregation of a chromosomal imprint. This imprint has been shown to consist of two ribonucleotides that are incorporated into the DNA during laggingstrand synthesis in response to a replication pause, but the underlying mechanism remains unknown. Here we present key novel discoveries important for unravelling this process. Our data show that cis-acting sequences within the mat1 cassette mediate pausing of replication forks at the proximity of the imprinting site, and the results suggest that this pause dictates specific priming at the position of imprinting in a sequence-independent manner. Also, we identify a novel type of cis-acting spacer region important for the imprinting process that affects where subsequent primers are put down after the replication fork is released from the pause. Thus, our data suggest that the imprint is formed by ligation of a not-fullyprocessed Okazaki fragment to the subsequent fragment. The presented work addresses how differentiated sister chromatids are established during DNA replication through the involvement of replication barriers