Long-term starin monitoring data of jacket-type offshore structure for tidal current power generation under severe tidal current environments

Structural strain responses of the jacket-type Uldolmok tidal current power plant structure under severe\ud tidal environments were analyzed using long-term measurement data from construction to normal operation. From the\ud measured data during construction, it was found that there were significant changes in strain responses at the steps of\ud jacket lifting, weight-block loading, pile ejection and insertion. Strains due to permanent and tidal current loads were\ud analyzed during removal work on one among six jacket legs, and it was found that the strains due to permanent load\ud were much significantly changed after removal of on jacket leg. From the measurement data during normal operation, it\ud was observed that strain responses were obviously fluctuated with M2 and M4 tidal periods and also with relatively\ud short period of about 11 min due to the peculiar tidal characteristics in the Uldolmok strait

Random wave loads on a long detached breakwater considering diffraction

Battjes (1982) found the loads of short-crested random waves on a long structure decrease with the structure length and also with the obliqueness of wave incidence. These decreases come from the spatial phase difference along the structure. Lee et al. (2010) found that obliquely incident random waves in a nearshore area become directionally asymmetric due to refraction. They also found the asymmetry becomes more significant in shallower waters. Recently, Jung et al. (2011) studied random wave loads on a long structure considering diffraction and directional asymmetry. In this study, we further study random wave loads on a detached breakwater considering diffraction of waves which propagate at both ends of the breakwater. We also consider directional asymmetry. The structure may be placed along the bottom contours in order to protect on-shore incoming waves. In that case, refraction induced random waves may become asymmetric, i.e., on-shore components are more dominant than along-shore ones. Therefore, directional obliqueness on the structure becomes less and thus the wave loads decrease in less degree than the symmetric waves. When waves are obliquely incident on a long structure, the diffract ing waves give forces on the lee side of the structure. The diffracting wave has a spatial phase variation along the lee side which is different from that the obliquely incident wave has on the front side. Thus, the wave loads decrease with the existence of diffract ing waves and also the phase difference between the incident and diffracting waves

The in vitro effects of dehydroepiandrosterone on human osteoarthritic chondrocytes

AbstractObjective: To investigate the in vitro effects of dehydroepiandrosterone (DHEA) on human osteoarthritic chondrocytes.Design: Chondrocytes isolated from human osteoarthritic knee cartilage were three-dimensionally cultured in alginate beads, except for cell proliferation experiment. Cells were treated with DHEA in the presence or absence of IL-1β. The effects on chondrocytes were analyzed using a 3-(4,5-dimethylthiazol-2yl)-5-(3-carboxymethoxy-phenyl)-2-(4-sulfophenyl)-2H-tetrazolium inner salt (MTS) assay (for chondrocyte proliferation), a dimethylmethylene blue (DMB) assay (for glycosaminoglycan (GAG) synthesis), and an indole assay (for DNA amount). Gene expressions of type I and II collagen, metalloproteinase-1 and -3 (MMP-1 and -3), and tissue inhibitor of metalloproteinase-1 (TIMP-1) as well as the IL-1β-induced gene expressions of MMP-1 and -3 were analyzed by reverse transcription-polymerase chain reaction (RT-PCR). The protein synthesis of MMP-1 and -3 and TIMP-1 was determined by Western blotting.Results: The treatment of chondrocytes with DHEA did not affect chondrocyte proliferation or GAG synthesis up to 100μM of concentration. The gene expression of type II collagen increased in a dose-dependent manner, while that of type I decreased. DHEA suppressed the expression of MMP-1 significantly at concentrations exceeding 50μM. The gene expression of MMP-3 was also suppressed, but this was without statistical significance. The expression of TIMP-1 was significantly increased by DHEA at concentrations exceeding 10μM. The effects of DHEA on the gene expressions of MMP-1 and -3 were more prominent in the presence of IL-1β, in which DHEA suppressed not only MMP-1, but also MMP-3 at the lower concentrations, 10 and 50μM, respectively. Western blotting results were in agreement with RT-PCR, which indicates that DHEA acts at the gene transcription level.Conclusions: Our study demonstrates that DHEA has no toxic effect on chondrocytes up to 100μM of concentration and has an ability to modulate the imbalance between MMPs and TIMP-1 during OA at the transcription level, which suggest that it has a protective role against articular cartilage loss

Experimental study on critical heat flux under rolling condition

Paper presented at the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta, 16-18 July, 2012.This paper presents defining characteristics of the critical heat flux (CHF) for the boiling of R-134a in vertical tube operation under rolling motion in marine reactor. It is important to predict CHF of marine reactor having the rolling motion in order to increase the safety of the reactor. MArine Reactor Moving Simulator (MARMS) tests are conducted to measure the critical heat flux using R-134a flowing upward in a uniformly heated vertical tube under rolling motion. MARMS was rotated by motor and mechanical power transmission gear. The CHF tests were performed in a 9.5 mm I.D. test section with heated length of 1m. Mass fluxs range from 285 to 1300 kg/m2s, inlet subcoolings from 3 to 38oC and outlet pressures from 1.3 to 2.4 bar. Amplitudes of rolling range from 15 to 45 degrees and periods from 6 to 12 sec. To convert the test conditions of CHF test using R-134a in water, Katto's fluid-to- fluid modeling was used in present investigation. A CHF correlation is presented which accounts for the effects of pressure, mass flux, inlet subcooling and rolling angle over all conditions tested. Unlike existing transient CHF experiments, CHF ratio of certain mass flux and pressure are different in rolling motion. For the mass fluxes below 500 kg/m2s at 13, 16 (region of relative low mass flux), CHF ratio was decreased but was increased above that mass flux (region of relative high mass flux) bar. Moreover, CHF tend to enhance in entire mass flux at 24 bar.dc201

Development of wirelessly-powered, extracranial brain activator (ECBA) in a large animal model for the future non-invasive human neuromodulation

As transcranial electrical stimulation (tES) is an emerging and promising technique for neuromodulation, we developed a novel device; wirelessly-powered, extracranial brain activator (ECBA), which is mounted subcutaneously, and its neuromodulation effect was investigated. The oscillatory changes in electrocorticography (EcoG) were analyzed from two types of stimulation. Two weeks prior to the recording experiment, we underwent surgery for implantation of subdural strips and ECBA module over centroparietal regions of anesthetized beagles. Low-frequency stimulation (LFS) and subsequent high-frequency stimulation (HFS) protocols (600 pulses respectively) were applied. Then, the power changes before and after each stimulation in five different bands were compared. A significantly larger voltage difference with subcutaneous than transcutaneous stimulation measured at EcoG channels indicated a substantial current attenuation between the skin and skull. Compared with the baseline, all subjects showed consistently decreased delta power and increased gamma power after HFS. LFS also induced a similar, but opposite, pattern of power change in four beagles. The results from this study indicate that LFS and HFS with our novel ECBA can consistently and effectively modulate neural activity of the cortex, inducing neural inhibition and facilitation functions, respectively. Future studies are necessary to further ensuring a consistent efficacy and long-term safety.11Ysciescopu

Highly reproducible alkali metal doping system for organic crystals through enhanced diffusion of alkali metal by secondary thermal activation

In this paper, we report an efficient alkali metal doping system for organic single crystals. Our system employs an enhanced diffusion method for the introduction of alkali metal into organic single crystals by controlling the sample temperature to induce secondary thermal activation. Using this system, we achieved intercalation of potassium into picene single crystals with closed packed crystal structures. Using optical microscopy and Raman spectroscopy, we confirmed that the resulting samples were uniformly doped and became K2picene single crystal, while only parts of the crystal are doped and transformed into K2picene without secondary thermal activation. Moreover, using a customized electrical measurement system, the insulator-to-semiconductor transition of picene single crystals upon doping was confirmed by in situ electrical conductivity and ex situ temperature-dependent resistivity measurements. X-ray diffraction studies showed that potassium atoms were intercalated between molecular layers of picene, and doped samples did not show any KH- nor KOH-related peaks, indicating that picene molecules are retained without structural decomposition. During recent decades, tremendous efforts have been exerted to develop high-performance organic semiconductors and superconductors, whereas as little attention has been devoted to doped organic crystals. Our method will enable efficient alkali metal doping of organic crystals and will be a resource for future systematic studies on the electrical property changes of these organic crystals upon doping. © 2018 The Author(s

Optical investigation on the electronic structures of Y_{2}Ru_{2}O_{7}, CaRuO_{3}, SrRuO_{3}, and Bi_{2}Ru_{2}O_{7}

We investigated the electronic structures of the bandwidth-controlled ruthenates, Y$_{2}$Ru$_{2}$O$_{7}$, CaRuO$_{3}$, SrRuO$_{3}$, and Bi$_{2}$Ru$_{2}$O$_{7}$, by optical conductivity analysis in a wide energy region of 5 meV $\sim$ 12 eV. We could assign optical transitions from the systematic changes of the spectra and by comparison with the O 1$s$ x-ray absorption data. We estimated some physical parameters, such as the on-site Coulomb repulsion energy and the crystal-field splitting energy. These parameters show that the 4$d$ orbitals should be more extended than 3$d$ ones. These results are also discussed in terms of the Mott-Hubbard model.Comment: 12 pages (1 table), 3 figure

Time and Amplitude of Afterpulse Measured with a Large Size Photomultiplier Tube

We have studied the afterpulse of a hemispherical photomultiplier tube for an upcoming reactor neutrino experiment. The timing, the amplitude, and the rate of the afterpulse for a 10 inch photomultiplier tube were measured with a 400 MHz FADC up to 16 \ms time window after the initial signal generated by an LED light pulse. The time and amplitude correlation of the afterpulse shows several distinctive groups. We describe the dependencies of the afterpulse on the applied high voltage and the amplitude of the main light pulse. The present data could shed light upon the general mechanism of the afterpulse.Comment: 11 figure

Prominent bulk pinning effect in the MgB_2 superconductor

We report the magnetic-field dependence of the irreversible magnetization of the recently discovered binary superconductor MgB$_{2}$. For the temperature region of $T< 0.9T_c$, the contribution of the bulk pinning to the magnetization overwhelms that of the surface pinning. This was evident from the fact that the magnetization curves, $M(H)$, were well described by the critical-state model without considering the surface pinning effect. It was also found that the $M(H)$ curves at various temperatures scaled when the field and the magnetization were normalized by the characteristic scaling factors $H^\ast(T)$ and $M^\ast(T)$, respectively. This feature suggests that the pinning mechanism determining the hysteresis in $M(H)$ is unique below $T=T_c$.Comment: 4pages and 4 figures. Phys. Rev. B (accepted

New Mechanism of Hepatic Fibrogenesis: Hepatitis C Virus Infection Induces Transforming Growth Factor β1 Production through Glucose-Regulated Protein 94

Hepatitis C virus (HCV) is one of the leading causes of chronic liver inflammatory disease (hepatitis), which often leads to more severe diseases, such as liver fibrosis, cirrhosis, and hepatocellular carcinoma. Liver fibrosis, in particular, is a major pathogenic consequence of HCV infection, and transforming growth factor beta 1 (TGF-beta 1) plays a key role in its pathogenesis. Several HCV proteins have been suggested to either augment or suppress the expression of TGF-beta 1 by HCV-infected cells. Here, we report that TGF-beta 1 levels are elevated in HCV-infected hepatocytes cultured in vitro and in liver tissue of HCV patients. Notably, the level of TGF-beta 1 in media from in vitro-cultured HCV-infected hepatocytes was high enough to activate primary hepatic stellate cells isolated from rats. This indicates that TGF-beta 1 secreted by HCV-infected hepatocytes is likely to play a key role in the liver fibrosis observed in HCV patients. Moreover, we showed that HCV E2 protein triggers the production of TGF-beta 1 by HCV-infected cells through overproduction of glucose-regulated protein 94 (GRP94).open1177sciescopu