2,602 research outputs found
Limits on the Position Wander of Sgr A*
We present measurements with the VLBA of the variability in the centroid
position of Sgr A* relative to a background quasar at 7-mm wavelength. We find
an average centroid wander of 71 +/- 45 micro-arcsec for time scales between 50
and 100 min and 113 +/- 50 micro-arcsec for timescales between 100 and 200 min,
with no secular trend. These are sufficient to begin constraining the viability
of the hot-spot model for the radio variability of Sgr A*. It is possible to
rule out hot spots with orbital radii above 15GM_SgrA*/c^2 that contribute more
than 30% of the total 7-mm flux. However, closer or less luminous hot spots
remain unconstrained. Since the fractional variability of Sgr A* during our
observations was ~20% on time scales of hours, the hot-spot model for Sgr A*'s
radio variability remains consistent with these limits. Improved monitoring of
Sgr A*'s centroid position has the potential to place significant constraints
upon the existence and morphology of inhomogeneities in a supermassive black
hole accretion flow.Comment: 14 pages, 3 figures submitted to Ap
Oscillating Starless Cores: The Nonlinear Regime
In a previous paper, we modeled the oscillations of a thermally-supported
(Bonnor-Ebert) sphere as non-radial, linear perturbations following a standard
analysis developed for stellar pulsations. The predicted column density
variations and molecular spectral line profiles are similar to those observed
in the Bok globule B68 suggesting that the motions in some starless cores may
be oscillating perturbations on a thermally supported equilibrium structure.
However, the linear analysis is unable to address several questions, among them
the stability, and lifetime of the perturbations. In this paper we simulate the
oscillations using a three-dimensional numerical hydrodynamic code. We find
that the oscillations are damped predominantly by non-linear mode-coupling, and
the damping time scale is typically many oscillation periods, corresponding to
a few million years, and persisting over the inferred lifetime of gobules.Comment: 7 pages, 7 figures, accepted by Ap
Natural history contributions of the University of Glasgow Exploration Society to Scotland and the World
Expeditions with a natural history focus have been
organised by University of Glasgow staff and
students since the 1930s. The educational benefits of
such expeditions to students have been reported by
Harper
et
al.
(
Journal
of
Biological
Education
51, 3-
16; 2017). Here, we present a short history of these
expeditions, concentrating on their scientific
achievements. In addition to expedition reports, a
large number of PhD theses, masters and honours
project reports and scientific papers have been
based on expedition work. Many biological
specimens have been deposited in museums,
including some new species. We provide case
histories of four expedition locations, to demonstrate
the variety of work done, and the value of returning
many times to the same place: Scotland, Trinidad and
Tobago, North Cyprus and Ecuador. A major problem
for expeditions is funding. For many years, the
Carnegie Trust for the Universities of Scotland ran a
funding stream that was crucial to the viability of
Scottish university expeditions, but this has sadly
now closed. For Glasgow University expeditions, the
Blodwen Lloyd Binns Bequest has provided a reliable
source since 1994, and we hope that it will continue
to do so
Theory and design of InGaAsBi mid-infrared semiconductor lasers: type-I quantum wells for emission beyond 3 m on InP substrates
We present a theoretical analysis and optimisation of the properties and
performance of mid-infrared semiconductor lasers based on the dilute bismide
alloy InGaAsBi, grown on conventional (001) InP
substrates. The ability to independently vary the epitaxial strain and emission
wavelength in this quaternary alloy provides significant scope for band
structure engineering. Our calculations demonstrate that structures based on
compressively strained InGaAsBi quantum wells (QWs)
can readily achieve emission wavelengths in the 3 -- 5 m range, and that
these QWs have large type-I band offsets. As such, these structures have the
potential to overcome a number of limitations commonly associated with this
application-rich but technologically challenging wavelength range. By
considering structures having (i) fixed QW thickness and variable strain, and
(ii) fixed strain and variable QW thickness, we quantify key trends in the
properties and performance as functions of the alloy composition, structural
properties, and emission wavelength, and on this basis identify routes towards
the realisation of optimised devices for practical applications. Our analysis
suggests that simple laser structures -- incorporating
InGaAsBi QWs and unstrained ternary
InGaAs barriers -- which are compatible with established
epitaxial growth, provide a route to realising InP-based mid-infrared diode
lasers.Comment: Submitted versio
The Event Horizon of M87
The 6 billion solar mass supermassive black hole at the center of the giant
elliptical galaxy M87 powers a relativistic jet. Observations at millimeter
wavelengths with the Event Horizon Telescope have localized the emission from
the base of this jet to angular scales comparable to the putative black hole
horizon. The jet might be powered directly by an accretion disk or by
electromagnetic extraction of the rotational energy of the black hole. However,
even the latter mechanism requires a confining thick accretion disk to maintain
the required magnetic flux near the black hole. Therefore, regardless of the
jet mechanism, the observed jet power in M87 implies a certain minimum mass
accretion rate. If the central compact object in M87 were not a black hole but
had a surface, this accretion would result in considerable thermal
near-infrared and optical emission from the surface. Current flux limits on the
nucleus of M87 strongly constrain any such surface emission. This rules out the
presence of a surface and thereby provides indirect evidence for an event
horizon.Comment: 9 pages, 2 figures, submitted to Ap
Solid state television camera system Patent
Solid state television camera system consisting of monolithic semiconductor mosaic sensor and molecular digital readout system
Improving utility in the Marine Corps depot level maintenance program
MBA Professional ReportThe Marine Corps operates a Depot Level Maintenance Program (DLMP) to support the continued operation of principal end items. Principal end items require periodic induction into the DLMP. This maintenance consists of major systems overhauls aimed at extending the life cycle of the principal end item. The frequency of these inductions is different for each end item. The number of systems requiring induction into Depot Level Maintenance in a given year is always greater than the funding available in that year resulting in a constraint. The Marine Corps has attempted to optimize the utility received from the DLMP through the use of a model that takes a number of variables into consideration resulting in a schedule for enditems to be inducted into the DLMP. This model makes the most efficient use of available funding by creating the largest increase in readiness reporting possible given the constrained budget. The changing operational requirements in light of current conflicts and future operations tempo have made the current DLMP process problematic.http://archive.org/details/improvingutility109459886Major, United States Marine CorpsCaptain, United States Marine CorpsApproved for public release; distribution is unlimited
Strong deflection limit of black hole gravitational lensing with arbitrary source distances
The gravitational field of supermassive black holes is able to strongly bend
light rays emitted by nearby sources. When the deflection angle exceeds ,
gravitational lensing can be analytically approximated by the so-called strong
deflection limit. In this paper we remove the conventional assumption of
sources very far from the black hole, considering the distance of the source as
an additional parameter in the lensing problem to be treated exactly. We find
expressions for critical curves, caustics and all lensing observables valid for
any position of the source up to the horizon. After analyzing the spherically
symmetric case we focus on the Kerr black hole, for which we present an
analytical 3-dimensional description of the higher order caustic tubes.Comment: 20 pages, 8 figures, appendix added. In press on Physical Review
Radiative Models of Sagittarius A* and M87 from Relativistic MHD Simulations
Ongoing millimeter VLBI observations with the Event Horizon Telescope allow
unprecedented study of the innermost portion of black hole accretion flows.
Interpreting the observations requires relativistic, time-dependent physical
modeling. We discuss the comparison of radiative transfer calculations from
general relativistic MHD simulations of Sagittarius A* and M87 with current and
future mm-VLBI observations. This comparison allows estimates of the viewing
geometry and physical conditions of the Sgr A* accretion flow. The viewing
geometry for M87 is already constrained from observations of its large-scale
jet, but, unlike Sgr A*, there is no consensus for its millimeter emission
geometry or electron population. Despite this uncertainty, as long as the
emission region is compact, robust predictions for the size of its jet
launching region can be made. For both sources, the black hole shadow may be
detected with future observations including ALMA and/or the LMT, which would
constitute the first direct evidence for a black hole event horizon.Comment: 8 pages, 2 figures, submitted to the proceedings of AHAR 2011: The
Central Kiloparse
- …