Dipole Antenna Printed on Paper Substrate for WLAN Applications

International audienceThe design of a dipole antenna printed on a paper substrate is presented in this paper. The antenna which integrates a compact balun is devoted for dual-band 2.4/5 GHz WLAN applications. The antenna is based on a double-side printed multilayer paper substrate and is fed with a coaxial cable for the testing. The simulated results of the whole structure are also presented in detail and compared with the measured performances

Change-of-state Paradigms and the middle in Kinyarwanda

This paper investigates the derivational relationships among members of verbal paradigms in Kinyarwanda (Bantu JD.61; Rwanda) by pursuing two interrelated goals. First, I describe a variety of derivational strategies for marking transitive and intransitive variants in change-of-state verb paradigms. Second, I focus on the detransitivizing morpheme –ik which serves as one possible marking for intransitive members of these paradigms. Ultimately, I argue that this morpheme is a marker of middle voice, and the variety of readings which appear with this form can be subsumed under a single operation of argument suppression. Finally, I provide a discussion of reflexives and the apparent lack of a reflexive reading with –ik by arguing that this reading is blocked by either lexical reflexives or the reflexive prefix i–

Impact of species and antibiotic therapy of enterococcal peritonitis on 30-day mortality in critical care - An analysis of the OUTCOMEREA database

Introduction: Enterococcus species are associated with an increased morbidity in intraabdominal infections (IAI). However, their impact on mortality remains uncertain. Moreover, the influence on outcome of the appropriate or inappropriate status of initial antimicrobial therapy (IAT) is subjected to debate, except in septic shock. The aim of our study was to evaluate whether an IAT that did not cover Enterococcus spp. was associated with 30-day mortality in ICU patients presenting with IAI growing with Enterococcus spp. Material and methods: Retrospective analysis of French database OutcomeRea from 1997 to 2016. We included all patients with IAI with a peritoneal sample growing with Enterococcus. Primary endpoint was 30-day mortality. Results: Of the 1017 patients with IAI, 76 (8%) patients were included. Thirty-day mortality in patients with inadequate IAT against Enterococcus was higher (7/18 (39%) vs 10/58 (17%), p = 0.05); however, the incidence of postoperative complications was similar. Presence of Enterococcus spp. other than E. faecalis alone was associated with a significantly higher mortality, even greater when IAT was inadequate. Main risk factors for having an Enterococcus other than E. faecalis alone were as follows: SAPS score on day 0, ICU-acquired IAI, and antimicrobial therapy within 3 months prior to IAI especially with third-generation cephalosporins. Univariate analysis found a higher hazard ratio of death with an Enterococcus other than E. faecalis alone that had an inadequate IAT (HR = 4.4 [1.3-15.3], p = 0.019) versus an adequate IAT (HR = 3.1 [1.0-10.0], p = 0.053). However, after adjusting for confounders (i.e., SAPS II and septic shock at IAI diagnosis, ICU-acquired peritonitis, and adequacy of IAT for other germs), the impact of the adequacy of IAT was no longer significant in multivariate analysis. Septic shock at diagnosis and ICU-acquired IAI were prognostic factors. Conclusion: An IAT which does not cover Enterococcus is associated with an increased 30-day mortality in ICU patients presenting with an IAI growing with Enterococcus, especially when it is not an E. faecalis alone. It seems reasonable to use an IAT active against Enterococcus in severe postoperative ICU-acquired IAI, especially when a third-generation cephalosporin has been used within 3 months. © 2019 The Author(s)

IMMERSED VOLUME METHOD WITH ANISOTROPIC MESH ADAPTATION AND TIME-STEPPING CONTROL FOR FLUID STRUCTURE INTERACTION AND HEAT TRANSFER APPLICATIONS

International audienceKey words: fluid structure interactions, anisotropic mesh adaptation, time adaptation, monolothic approach, incompressible flows, heat transfer, stabilized finite element methods. Figure 1: Streamlines' distribution inside an industrial furnace and around heated ingots. This paper presents advancements toward a monolithic approach with anisotropic mesh adaptation and time-stepping control for the numerical resolution of fluid structure interaction applications with complex geometries. A stabilized finite element method [3, 4] is used to numerically solve time-dependent, three-dimensional, conjugate heat transfer and turbulent fluid flows.The proposed immersed volume method with the anisotropic mesh adaptation ensures an accurate capturing of the discontinuities at the fluid-solid interfaces and provides a homogeneous physical and thermodynamic properties for eac

Mutual coupling reduction through choke structures in a Slotted Waveguide Antenna Array

International audienceThis article presents a comprehensive study on reducing mutual coupling in a slotted waveguide antenna array (SWAA), operating in the X band. The objective is to limit such parasitic coupling effects on radiation pattern performances. Optimised choke structures are inserted between adjacent slots sub-arrays in order to control surface currents distribution. Simulation results exhibit a remarkable reduction on isolation between adjacent waveguides. This induces an overall performance improvement in terms of main beam and side lobes control. Furthermore, using field calculator on HFSS™, the efield levels of each slot are extracted. The plus points and drawbacks of the choke structure on the radiation pattern are then explained

Simulation of complex high Reynolds flows with a VMS method and adaptive meshing

International audienc

Dynamic load-balancing of finite element applications with the DRAMA library

The DRAMA library, developed within the European Commission funded (ESPRIT) project DRAMA, supports dynamic load-balancing for parallel (message-passing) mesh-based applications. The target applications are those with dynamic and solution-adaptive features. The focus within the DRAMA project was on finite element simulation codes for structural mechanics. An introduction to the DRAMA library will illustrate that the very general cost model and the interface designed specifically for application requirements provide simplified and effective access to a range of parallel partitioners. The main body of the paper will demonstrate the ability to provide dynamic load-balancing for parallel FEM problems that include: adaptive meshing, re-meshing, the need for multi-phase partitioning