Saturn's Icy Moon Rhea: a Prediction for Bulk Chemical Composition and Physical Structure at the Time of the Cassini Spacecraft First Flyby

I report a model for the formation of Saturn's family of mid-sized icy moons to coincide with the first flypast of Rhea by the Cassini Orbiter spacecraft on 26 November 2005. It is proposed that these moons had condensed from a concentric family of orbiting gas rings that were cast off some 4600 Myr ago by the contracting proto-Saturnian cloud. Numerical and structural models for Rhea are constructed on the basis of a computed bulk chemical mix of hydrated rock (mass fraction 0.385), H2O ice (0.395), and NH3 ice (0.220). The large proportion of NH3 in the ice mass inhibits the formation of the dense crystalline phase II of H2O ice at the satellite's centre. This may explain the absence of compressional features on the surface. The favoured model of Rhea has a chemically uniform interior and is very cold. The satellite is nearly isodense and the predicted value of the axial moment-of-inertia factor is C/MR^2 = 0.399 +/- 0.004. NH3 is unstable at Saturn's distance from the Sun, except near the polar regions of the satellite. Perhaps the Cassini Orbiter will discover indirect evidence for NH3 through the sublimative escape of this ice from the outer layers, especially near the equatorial zones. Wasting of NH3 would weaken the residual soil, so making the edges of craters soft and prone to landslides. It will be exciting to learn what Cassini discovers.Comment: This paper was submitted to the Publications of the Astronomical Society of Australia (PASA) on 30 November 200

Saturn: Origin and composition of its inner moons and rings

The contraction of the primitive protosaturnian cloud, using ideas of supersonic turbulent convection was modeled. The model suggested that each of Saturn's inner moons, excepting Rhea, condensed above the ice-point of water and consists primarily of hydrous magnesium silicates. The satellite mean densities steadily increase towards the planet and the rocky moons are irregular in shape

Voyager and the origin of the solar system

A unified model for the formation of regular satellite systems and the planetary system is outlined. The basis for this modern Laplacian theory is that there existed a large supersonic turbulent stress arising from overshooting convective motions within the three primitive gaseous clouds which formed Jupiter, Saturn, and the Sun. Calculations show that if each cloud possessed the same fraction of supersonic turbulent energy, equal to about 5% of the cloud's gravitational potential energy, then the broad mass distribution and chemistry of all regular satellite and planetary systems can be simultaneously accounted for. Titan is probably a captured moon of Saturn. Several predictions about observations made by Voyager 2 at Saturn are presented

Neptune's Triton: A moon rich in dry ice and carbon

The encounter of the spacecraft Voyager 2 with Neptune and its large satellite Triton in August 1989 will provide a crucial test of ideas regarding the origin and chemical composition of the outer solar system. In this pre-encounter publication, the possibility is quantified that Titron is a captured moon which, like Pluto and Charon, originally condensed as a major planetesimal within the gas ring that was shed by the contracting protosolar cloud at Neptune's orbit. Ideas of supersonic convective turbulence are used to compute the gas pressure, temperature and rat of catalytic synthesis of CH4, CO2, and C(s) within the protosolar cloud, assuming that all C is initially present as CO. The calculations lead to a unique composition for Triton, Pluto, Charon: each body consists of, by mass, 18 1/2 percent solid CO2 ice, 4 percent graphite, 1/2 percent CH4 ice, 29 percent methanated water ice and 48 percent of anhydrous rock. This mix has a density consistent with that of the Pluto-Charon system and yields a predicted mean density for Triton of 2.20 + or - 0.5 g/cu cm, for satellite radius equal to 1,750 km

An analysis of the acoustic cavitation noise spectrum: The role of periodic shock waves

Research on applications of acoustic cavitation is often reported in terms of the features within the spectrum of the emissions gathered during cavitation occurrence. There is, however, limited understanding as to the contribution of specific bubble activity to spectral features, beyond a binary interpretation of stable versus inertial cavitation. In this work, laser-nucleation is used to initiate cavitation within a few millimeters of the tip of a needle hydrophone, calibrated for magnitude and phase from 125 kHz to 20 MHz. The bubble activity, acoustically driven at f0 = 692 kHz, is resolved with high-speed shadowgraphic imaging at 5 × 106 frames per second. A synthetic spectrum is constructed from component signals based on the hydrophone data, deconvolved within the calibration bandwidth, in the time domain. Cross correlation coefficients between the experimental and synthetic spectra of 0.97 for the f 0/2 and f 0/3 regimes indicate that periodic shock waves and scattered driving field predominantly account for all spectral features, including the sub-harmonics and their over-harmonics, and harmonics of f 0

Solution structure of a bacterial microcompartment targeting peptide and its application in the construction of an ethanol bioreactor

Targeting of proteins to bacterial microcompartments (BMCs) is mediated by an 18-amino-acid peptide sequence. Herein, we report the solution structure of the N-terminal targeting peptide (P18) of PduP, the aldehyde dehydrogenase associated with the 1,2-propanediol utilization metabolosome from Citrobacter freundii. The solution structure reveals the peptide to have a well-defined helical conformation along its whole length. Saturation transfer difference and transferred NOE NMR has highlighted the observed interaction surface on the peptide with its main interacting shell protein, PduK. By tagging both a pyruvate decarboxylase and an alcohol dehydrogenase with targeting peptides, it has been possible to direct these enzymes to empty BMCs in vivo and to generate an ethanol bioreactor. Not only are the purified, redesigned BMCs able to transform pyruvate into ethanol efficiently, but the strains containing the modified BMCs produce elevated levels of alcohol