731 research outputs found
A modified R1 X R1 method for helioseismic rotation inversions
We present an efficient method for two dimensional inversions for the solar
rotation rate using the Subtractive Optimally Localized Averages (SOLA) method
and a modification of the R1 X R1 technique proposed by Sekii (1993). The SOLA
method is based on explicit construction of averaging kernels similar to the
Backus-Gilbert method. The versatility and reliability of the SOLA method in
reproducing a target form for the averaging kernel, in combination with the
idea of the R1 X R1 decomposition, results in a computationally very efficient
inversion algorithm. This is particularly important for full 2-D inversions of
helioseismic data in which the number of modes runs into at least tens of
thousands.Comment: 12 pages, Plain TeX + epsf.tex + mn.te
Heparin-containing block copolymers, Part I: Surface characterization
Newly synthesized heparin-containing block copolymers, consisting of a hydrophobic block of polystyrene (PS), a hydrophilic spacer-block of poly(ethylene oxide) (PEO) and covalently bound heparin (Hep) as bioactive block, were coated on aluminium, glass, polydimethylsiloxane (PDMS), PS or Biomer substrates. Surfaces of coated materials were characterized by transmission electron microscopy (TEM), contact angle measurements and X-ray photoelectron spectroscopy for chemical analysis (XPS). It was demonstrated by TEM that thin films of PS-PEO and PS-PEO-Hep block copolymers consisted of heterogeneous microphase separated structures. Using sessile-drop and Wilhelmy plate dynamic contact angle measurements, insight was provided into the hydrophilicity of the surfaces of the coatings. Measurements with hydrated coatings of PS-PEO and PS-PEO-Hep block copolymers revealed that the surfaces became more hydrophilic during immersion in water, due to relaxation/reorientation, or swelling of PEO or PEO-Hep domains, respectively. XPS results for PS, PEO, heparin and PS-PEO as powder agreed well with qualitative and quantitative predictions. XPS results for films of PS-PEO and PS-PEO-Hep block copolymers showed enrichments of PEO in the top layers of the coatings. This effect was more pronounced for hydrated surfaces. Only small amounts of heparin were detected at the surface of coatings of PS-PEO-Hep block copolymers
Structure of the near-surface layers of the Sun: asphericity and time variation
We present results on the structure of the near-surface layers of the Sun
obtained by inverting frequencies of high-degree solar modes from "ring
diagrams". We have results for eight epochs between June 1996 and October 2003.
The frequencies for each epoch were obtained from ring diagrams constructed
from MDI Dopplergrams spanning complete Carrington rotations. We find that
there is a substantial latitudinal variation of both sound speed and the
adiabatic index Gamma_1 in the outer 2% of the Sun. We find that both the
sound-speed and Gamma_1 profiles change with changes in the level of solar
activity. In addition, we also study differences between the northern and
southern hemispheres of the Sun and find a small asymmetry that appears to
reflect the difference in magnetic activity between the two hemispheres.Comment: To appear in ApJ (January 2007
Microstates of a Neutral Black Hole in M Theory
We consider vacuum solutions in M theory of the form of a five-dimensional
Kaluza-Klein black hole cross T^6. In a certain limit, these include the
five-dimensional neutral rotating black hole (cross T^6). From a IIA
standpoint, these solutions carry D0 and D6 charges. We show that there is a
weakly coupled D-brane description which precisely reproduces the
Hawking-Bekenstein entropy in the extremal limit, even though supersymmetry is
completely broken.Comment: 11 pages. v2: microstate counting extended to generic angular moment
Estimating stellar mean density through seismic inversions
Determining the mass of stars is crucial both to improving stellar evolution
theory and to characterising exoplanetary systems. Asteroseismology offers a
promising way to estimate stellar mean density. When combined with accurate
radii determinations, such as is expected from GAIA, this yields accurate
stellar masses. The main difficulty is finding the best way to extract the mean
density from a set of observed frequencies.
We seek to establish a new method for estimating stellar mean density, which
combines the simplicity of a scaling law while providing the accuracy of an
inversion technique.
We provide a framework in which to construct and evaluate kernel-based linear
inversions which yield directly the mean density of a star. We then describe
three different inversion techniques (SOLA and two scaling laws) and apply them
to the sun, several test cases and three stars.
The SOLA approach and the scaling law based on the surface correcting
technique described by Kjeldsen et al. (2008) yield comparable results which
can reach an accuracy of 0.5 % and are better than scaling the large frequency
separation. The reason for this is that the averaging kernels from the two
first methods are comparable in quality and are better than what is obtained
with the large frequency separation. It is also shown that scaling the large
frequency separation is more sensitive to near-surface effects, but is much
less affected by an incorrect mode identification. As a result, one can
identify pulsation modes by looking for an l and n assignment which provides
the best agreement between the results from the large frequency separation and
those from one of the two other methods. Non-linear effects are also discussed
as is the effects of mixed modes. In particular, it is shown that mixed modes
bring little improvement as a result of their poorly adapted kernels.Comment: Accepted for publication in A&A, 20 pages, 19 figure
Reduction of carrier mobility in semiconductors caused by charge-charge interactions
Euan Hendry, M. Koeberg, J. Pijpers, and M. Bonn, Physical Review B, Vol. 75, article 233202 (2007). "Copyright © 2007 by the American Physical Society."We investigate the effect of charge-charge interactions on carrier mobility in titanium dioxide (TiO2) and silicon (Si) using terahertz spectroscopy. Charge scattering times and plasma frequencies are directly determined as a function of charge density. In Si, a linear increase in scattering rate for densities exceeding 1021 m−3 is attributed to electron-hole scattering. In contrast, in TiO2, charge-charge interactions are suppressed due to dielectric screening, highlighting the vastly different dielectric properties for these two materials
A novel approach for extracting time-delays from lightcurves of lensed quasar images
We present a new method to estimate time delays from light curves of lensed
quasars. The method is based on chi^2 minimization between the data and a
numerical model light curve. A linear variation can be included in order to
correct for slow long-term microlensing effects in one of the lensed images. An
iterative version of the method can be applied in order to correct for higher
order microlensing effects. The method is tested on simulated light curves.
When higher order microlensing effects are present the time delay is best
constrained with the iterative method. Analysis of a published data set for the
lensed double Q0957+561 yields results in agreement with other published
estimates.Comment: 6 pages, accepted for publication in A&
A Detailed Analysis of the Dust Formation Zone of IRC+10216 Derived from Mid-IR Bands of C2H2 and HCN
A spectral survey of IRC+10216 has been carried out in the range 11 to 14 um
with a spectral resolution of about 4 km s^-1. We have identified a forest of
lines in six bands of C2H2 involving the vibrational states from the ground to
3nu5 and in two bands of HCN, involving the vibrational states from the ground
up to 2nu2. Some of these transitions are observed also in H13CCH and H13CN. We
have estimated the kinetic, vibrational, and rotational temperatures, and the
abundances and column densities of C2H2 and HCN between 1 and 300 R* (1.5E16
cm) by fitting about 300 of these ro-vibrational lines. The envelope can be
divided into three regions with approximate boundaries at 0.019 arcsec (the
stellar photosphere), 0.1 arcsec (the inner dust formation zone), and 0.4
arcsec (outer dust formation zone). Most of the lines might require a large
microturbulence broadening. The derived abundances of C2H2 and HCN increase by
factors of 10 and 4, respectively, from the innermost envelope outwards. The
derived column densities for both C2H2 and HCN are 1.6E19 cm^-2. Vibrational
states up to 3000 K above ground are populated, suggesting pumping by
near-infrared radiation from the star and innermost envelope. Low rotational
levels can be considered under LTE while those with J>20-30 are not
thermalized. A few lines require special analysis to deal with effects like
overlap with lines of other molecules.Comment: 8 pages, 16 figures, 2 machine-readable tables, accepted in the
Astrophysical Journa
10,000 Standard Solar Models: a Monte Carlo Simulation
We have evolved 10,000 solar models using 21 input parameters that are
randomly drawn for each model from separate probability distributions for every
parameter. We use the results of these models to determine the theoretical
uncertainties in the predicted surface helium abundance, the profile of the
sound speed versus radius, the profile of the density versus radius, the depth
of the solar convective zone, the eight principal solar neutrino fluxes, and
the fractions of nuclear reactions that occur in the CNO cycle or in the three
branches of the p-p chains. We also determine the correlation coefficients of
the neutrino fluxes for use in analysis of solar neutrino oscillations. Our
calculations include the most accurate available input parameters, including
radiative opacity, equation of state, and nuclear cross sections. We
incorporate both the recently determined heavy element abundances recommended
by Asplund, Grevesse & Sauval (2005) and the older (higher) heavy element
abundances recommended by Grevesse & Sauval (1998). We present best-estimates
of many characteristics of the standard solar model for both sets of
recommended heavy element compositions.Comment: ** John N. Bahcall passed away on August 17, 2005. Manuscript has 60
pages including 10 figure
The Sub-Surface Structure of a Large Sample of Active Regions
We employ ring-diagram analysis to study the sub-surface thermal structure of
active regions. We present results using a large number of active regions over
the course of Solar Cycle 23. We present both traditional inversions of
ring-diagram frequency differences, with a total sample size of 264, and a
statistical study using Principal Component Analysis. We confirm earlier
results on smaller samples that sound speed and adiabatic index are changed
below regions of strong magnetic field. We find that sound speed is decreased
in the region between approximately r=0.99R_sun and r=0.995R_sun (depths of 3Mm
to 7Mm), and increased in the region between r=0.97R_sun and r=0.985R_sun
(depths of 11Mm to 21Mm). The adiabatic index is enhanced in the same deeper
layers that sound-speed enhancement is seen. A weak decrease in adiabatic index
is seen in the shallower layers in many active regions. We find that the
magnitudes of these perturbations depend on the strength of the surface
magnetic field, but we find a great deal of scatter in this relation, implying
other factors may be relevant.Comment: 16 pages, 11 figures, accepted for publication in Solar Physic
- …