Constant-amplitude, frequency- independent phase shifter

Electronic circuit using operational amplifiers provides output with constant phase shift amplitude, with respect to sinusoidal input, over wide range of frequencies. New circuit includes field effect transistor, Q, operational amplifiers, A1 and A2, and phase detector

Feedback integrator with grounded capacitor Patent

Feedback integrating circuit with grounded capacitor for signal processin

Temperature compensation of light-emitting diodes

Circuit which includes a thermistor-resistor combination to compensate for temperature fluctuations by supplying input voltage to light-emitting diode, maintains constant light output. Similar circuits can be used for temperature-induced variations in photodiode applications

Metal Oxide Silicon /MOS/ transistors protected from destructive damage by wire

Loop of flexible, small diameter, nickel wire protects metal oxide silicon /MOS/ transistors from a damaging electrostatic potential. The wire is attached to a music-wire spring, slipped over the MOS transistor case, and released so the spring tensions the wire loop around all the transistor leads, shorting them together. This allows handling without danger of damage

Self-tuning bandpass filter

An electronic filter is described which simultaneously maintains a constant bandwidth and a constant center frequency gain as the input signal frequency varies, and remains self-tuning to that center frequency over a decade range. The filter utilizes a field effect transistor (FET) as a voltage variable resistance in the bandpass frequency determining circuit. The FET is responsive to a phase detector to achieve self-tuning

Miniature piezoelectric triaxial accelerometer measures cranial accelerations

Tiny triaxial accelerometer whose sensing elements are piezoelectric ceramic beams measures human cranial accelerations when a subject is exposed to a centrifuge or other simulators of g environments. This device could be considered for application in dental, medical, and automotive safety research

Test apparatus for locating shorts during assembly of electrical buses

A test apparatus is described for locating electrical shorts that is especially suited for use while an electrical circuit is being fabricated or assembled. A ring counter derives input pulses from a square wave oscillator. The outputs of the counter are fed through transistors to an array of light emitting diodes. Each diode is connected to an electrical conductor, such as a bus bar, that is to be tested. In the absence of a short between the electrical conductors the diodes are sequentially illuminated. When a short occurs, a comparator/multivibrator circuit triggers an alarm and stops the oscillator and the sequential energization of the diodes. The two diodes that remain illuminated identify the electrical conductors that are shorted

A self-tuning filter

Self-tuning filter automatically adjusts its center frequency to track signal frequency. This permits the use of a filter with a bandwidth smaller than the range of input signal frequencies

Precision full-wave rectifier

Simplified circuit uses one operational amplifier and two precision resistors. The amplifier is operated open loop for switching and closed loop for linear gain, both simultaneously

Gyrator-type circuits replace ungrounded inductors

Gyrator circuits using only transistors, capacitors, and resistors which can replace both grounded and ungrounded inductors have been developed to permit complete microminiaturization of circuitry by integration of the components