A study of density modulation index in the inner heliospheric solar wind during solar cycle 23

The ratio of the rms electron density fluctuations to the background density in the solar wind (density modulation index, $\epsilon_{N} \equiv \Delta{N}/N$) is of vital importance in understanding several problems in heliospheric physics related to solar wind turbulence. In this paper, we have investigated the behavior of $\epsilon_{N}$ in the inner-heliosphere from 0.26 to 0.82 AU. The density fluctuations $\Delta{N}$ have been deduced using extensive ground-based observations of interplanetary scintillation (IPS) at 327 MHz, which probe spatial scales of a few hundred km. The background densities ($N$) have been derived using near-Earth observations from the Advanced Composition Explorer ($\it{ACE}$). Our analysis reveals that $0.001 \lesssim \epsilon_{N} \lesssim 0.02$ and does not vary appreciably with heliocentric distance. We also find that $\epsilon_{N}$ declines by 8% from 1998 to 2008. We discuss the impact of these findings on problems ranging from our understanding of Forbush decreases to the behavior of the solar wind dynamic pressure over the recent peculiar solar minimum at the end of cycle 23..Comment: 13 Pages, 8 Figures, Accepted for publication in Ap

Smart Waste Management System using IoT

With rapid increase in population, the issues related to sanitation with respect to garbage management are degrading immensely. It creates unhygienic conditions for the citizens in the nearby surrounding, leading to the spread of infectious diseases and illness. To avoid this problem, IoT based “Smart Waste Management” is the best and trending solution. In the proposed system, public dustbins will be provided with embedded device which helps in real time monitoring of level of garbage in garbage bins. The data regarding the garbage levels will be used to provide optimized route for garbage collecting vans, which will reduce cost associated with fuel. The load sensors will increase efficiency of data related to garbage level and moisture sensors will be used to provide data of waste segregation in a dust bin. The analysis of ceaseless data gathered will help municipality and government authorities to improve plans related to smart waste management with the help of various system generated reports

Impact Sensitivity of RDX and Viton Compositions Prepared by Co-precipitation Method

Desensitisation of explosive materials using polymers is an important area in safe utilisation of explosives in various applications. The RDX/viton composition has been developed using co-precipitation method with varying content of viton, ranging from 5 to 35 wt per cent. RDX and viton were dissolved in acetone which is a common solvent for RDX and viton, and then the acetone was extracted from the solution by distillation resulting in homogeneous RDX/viton composition. Infrared spectroscopy studies indicated presence of RDX and viton in the resulting compositions. Thermogravimetric and differential thermal analysis studies made on yielded compositions confirmed that RDX is present in the composition in desired content. The shift in exotherm of RDX/viton composition as compared to RDX showed that polymer-bonded RDX compositions are more stable. The impact sensitivity studies showed that sensitivity of RDX/viton composition decreased with increasing content of viton. The similar trend was observed for friction sensitivity. The co-precipitation method has been found to be advantages to obtain homogeneous composition of RDX and viton (with viton content up to 25 wt per cent) as revealed by linear trend in sensitivity data measurements. It has been demonstrated that the sensitivity of RDX can be tailored within a wide range using viton so as to suit in desired applications.Defence Science Journal, Vol. 65, No. 4, July 2015, pp. 287-291, DOI: http://dx.doi.org/10.14429/dsj.65.864

Detonating Cord for Flux Compression Generation using Electrical Detonator No. 33

The paper highlights the use of electrical detonators for magnetic flux compression generator applications which requires synchronisation of two events with precise time delay of tens of ms and jitter within a few ms. These requirements are generally achieved by exploding bridge wire type detonators which are difficult to develop and are not commercially available. A technique has been developed using commercially available electrical detonator no. 33 to synchronise between peak of seed current in stator coil and detonation of explosive charge in armature. In present experiments, electrical signal generated by self-shorting pin due to bursting of electrical detonator has been used to trigger the capacitor discharge and the detonating cord of known length has been used to incorporate predetermined delay to synchronise the events. It has been demonstrated that using electrical detonator and known length of detonating cord, the two events can be synchronised with predetermined delay between 31 and 251 ms with variation of ± 0.5ms. The technique developed is suitable for defence applications like generation of high power microwaves using explosive driven magnetic flux compression generators.Defence Science Journal, 2011, 61(1), pp.19-24, DOI:http://dx.doi.org/10.14429/dsj.61.3

Prediction of MET Overexpression in Non-Small Cell Lung Adenocarcinomas from Hematoxylin and Eosin Images

MET protein overexpression is a targetable event in non-small cell lung cancer (NSCLC) and is the subject of active drug development. Challenges in identifying patients for these therapies include lack of access to validated testing, such as standardized immunohistochemistry (IHC) assessment, and consumption of valuable tissue for a single gene/protein assay. Development of pre-screening algorithms using routinely available digitized hematoxylin and eosin (H&E)-stained slides to predict MET overexpression could promote testing for those who will benefit most. While assessment of MET expression using IHC is currently not routinely performed in NSCLC, next-generation sequencing is common and in some cases includes RNA expression panel testing. In this work, we leveraged a large database of matched H&E slides and RNA expression data to train a weakly supervised model to predict MET RNA overexpression directly from H&E images. This model was evaluated on an independent holdout test set of 300 over-expressed and 289 normal patients, demonstrating an ROC-AUC of 0.70 (95th percentile interval: 0.66 - 0.74) with stable performance characteristics across different patient clinical variables and robust to synthetic noise on the test set. These results suggest that H&E-based predictive models could be useful to prioritize patients for confirmatory testing of MET protein or MET gene expression status

Ultrafast optical generation of coherent phonons in CdTe1-xSex quantum dots

We report on the impulsive generation of coherent optical phonons in CdTe0.68Se0.32 nanocrystallites embedded in a glass matrix. Pump probe experiments using femtosecond laser pulses were performed by tuning the laser central energy to resonate with the absorption edge of the nanocrystals. We identify two longitudinal optical phonons, one longitudinal acoustic phonon and a fourth mode of a mixed longitudinal-transverse nature. The amplitude of the optical phonons as a function of the laser central energy exhibits a resonance that is well described by a model based on impulsive stimulated Raman scattering. The phases of the coherent phonons reveal coupling between different modes. At low power density excitations, the frequency of the optical coherent phonons deviates from values obtained from spontaneous Raman scattering. This behavior is ascribed to the presence of electronic impurity states which modify the nanocrystal dielectric function and, thereby, the frequency of the infrared-active phonons

Nanocrystalline Pentaerythritoltetranitrate using Sol-Gel Process

The secondary explosives developed with reduced particle size tend to be more insensitive for mechanical stimuli and may release energy with faster rate and gaining more importance nowadays. Therefore, aiming to reduce the particle size of one of the popular explosives, viz., pentaerythritoltetranitrate (PETN) to the nanometer range, a method for preparation of nanocrystalline PETN in the silica (SiO2) gel matrix using sol-gel process has been demonstrated. The PETN-SiO2 xerogels were prepared containing PETN content ranging from 50 per cent to 90 per cent (w/w) and the xerogels were characterised using different techniques. An exothermic peak at around 185 oC preceded by an endotherm in thermal analysis accompanied with weight loss in the temperature range from 150 oC to 200 oC   for the xerogel confirmed the presence of PETN in xerogel. Infrared spectra of xerogels showed peaks at around 1285 cm-1 and 1700 cm-1 assigned to O-NO2 and C-O bond representing PETN. Small angle x-ray scattering measurements on xerogels indicated that PETN entered in the pores of silica matrix. Transmission electron microscopy revealed that cystalline PETN    with particle size of around 15 nm dispersed in silica xerogel. The specific surface area for the PETN-SiO2 (90:10) xerogels was found to be 75 m2/g.Defence Science Journal, 2011, 61(6), pp.534-539, DOI:http://dx.doi.org/10.14429/dsj.61.59

Bio-nanotechnology application in wastewater treatment

The nanoparticles have received high interest in the field of medicine and water purification, however, the nanomaterials produced by chemical and physical methods are considered hazardous, expensive, and leave behind harmful substances to the environment. This chapter aimed to focus on green-synthesized nanoparticles and their medical applications. Moreover, the chapter highlighted the applicability of the metallic nanoparticles (MNPs) in the inactivation of microbial cells due to their high surface and small particle size. Modifying nanomaterials produced by green-methods is safe, inexpensive, and easy. Therefore, the control and modification of nanoparticles and their properties were also discussed

Swift Heavy Ion Induced Modification Studies of C60 Thin Films

Modification induced by 110 MeV Ni ion irradiated thin film samples of C60 on Si and quartz substrates were studied at various fluences. The pristine and irradiated samples were investigated using Raman spectroscopy, electrical conductivity and optical absorption spectroscopy. The Raman data and band gap measurements indicate that swift ions at low fluences result in formations that involve multiple molecular units like dimer or polymer. High fluence irradiation resulted in sub-molecular formations and amorphous semiconducting carbon, indicating overall damage of the fullerene molecules. These sub-molecular units have been identified with nanocrystalline diamond and nanocrystalline graphite like formations.Comment: 7 pages, 29 references and 9 figures submitted to J. Appl. Phy