Study of the Densities of Some R4NI - Solutions in Water - Isopropyl Alcohol Solvent Mixtures at 313.15 K by Magnetic Float Densitometerz and Then Study Masson’s Equation from Фv Data

Based on Masson's equation we study the molecular interactions between the compositions of the binary solution mixtures for different (%) compositions of Water– Isopropyl alcohol by adding tetraalkyl ammonium iodide at 313.15K. The densities of the solution mixtures (ρ¬s)have been measured very accurately by using Magnetic float Densitometer. The densitometer works on the electrostatic attraction force developed by the passage of current through a solenoid .using this technique, the densities (d¬0¬) of Water – Isopropyl alcohol solvent and mixtures of some tetra alkyl ammonium iodide, viz. Et4NI, Pr4NI, But¬4NI, Pen4NI at 0, 20, 40, 60, 80, 100% compositions (v/v) have been determined experimentally. The apparent molar volumes have been calculated from density data using Masson's equation and graph plotted between ϕv vs √c . The slopes of curves shows that in low dielectric constant medium (i.e, 20% water, =30.76 and 40% water, ∈=42.74 for all the four tetraalkyl ammonium iodide salts have positive slope. But as the dielectric constant of the solvent medium is increased by adding Water – Isopropyl alcohol, further additions of salts in the solution will start contributing towards the volume so the volume will increase on increasing the salt concentration therefore the plot ϕ¬¬¬v+ vs √c curves will give a positive and negative slope the data have been explained on the basis of dielectric constant of the solvent mixtures and size of the electrolyte ion

Thidiazuron induced somatic embryogenesis in Coffea arabica L. and Coffea canephora P ex Fr.

The rapid direct and repetitive somatic embryogenesis in Coffea arabica and C. canephora genotypes was tested on Murashige and Skoog medium (MS) containing thidiazuron (TDZ) (1-phenyl-3-(1,2,3,-thiadiazol-5-yl)urea) in concentrations of 2.27–11.35s M. Segments taken from cotyledon leaf, first leaf and stalk of regenerated plantlets produced clusters of somatic embryos directly from cut portions of explants on TDZ (9.08 M) containing medium within a period of two months. Subculturing of these embryo clusters produced more secondary embryos on reduced TDZ (0.045–0.91M) containing medium and these subsequently developed into plantlets (80–85%) on development medium followed by rooting on MS basal medium. This direct somatic embryogenesis from leaf and hypocotyl explants in Coffea sp. is a strong evidence of cell totipotency. The rapid somatic embryo induction protocol would be useful for the mass propagation, direct regeneration and genetic transformation of selected elite lines

Preparation and evaluation of adipic dihydrazide cross-linked hyaluronic acid microspheres for cephalexin

Hyaluronic acid also called as Hyaluronan, Sodium Hyaluronate (SA), sodium salt form of Hyaluronic acid is a biodegradable, biocompatible, and viscoelastic linear polysaccharide of a wide molecular weight range (1000 to 10,000,000 Da). In this project, described a method for preparing HA microspheres at different pH conditions by adapting a non-toxic and aqueous based crosslinking chemistry for sustained drug delivery of drugs. The derivatization chemistry of HA utilizing adipic dihydrazide has been used to construct hydrogels, applied for microsphere preparation. ADH was coupled efficiently to carbodimide-activated glucoronic acid residues of hyluronans. These ADH modified hyaluronan can be loaded with drug molecules and then cross linked into hydrogel. The drug was present in the bulk of hydrogel droplets which are present in liquid paraffin are precipitated by IPA. Formulating HA microspheres with this method have several advantages. Preliminary studies were conducted to confirm the better ratio of HA and ADH to show maximum entrapment efficiency and drug release. Then microspheres were prepared at different pH conditions and formulations were subjected to evaluation of various parameters like percentage yield, particle size, drug entrapment efficiency, porosity and bulk density, surface morphology, in vitro drug release among which F2B was optimized as best formulation which showed 74.6% entrapment efficiency and above 90% of drug release in 12 hours indicating Hyaluronic acid microspheres can be used as good carriers for sustained drug delivery of drugs

Evaluation and identification of resistance to powdery mildew in Indian wheat varieties under artificially created epiphytotic

Wheat production is globally weighed down by several biotic factors of which rusts and powdery mildew are the most important. Powdery mildew, caused by Blumeria graminis f. sp. tritici, is becoming a disease of major importance in the North Western Plains Zone and Northern Hills Zone of the country. In the present context ofclimate variability, diseases like powdery mildew can assume greater importance in wheat breeding programs. Importance of basic studies on powdery mildew is the need of hour. A set of 370 Indian bread wheat, durum, dicoccum and triticale varieties were screened using mixture of natural occurring pathotypes from four locations(viz., Karnal, Ludhiana, Dhaulakuan and Yamunanagar) under polyhouse conditions. Data were recorded on the severity of infection based on 0-9 scale. Out of 370, only 23 varieties (Amrut, DDK 1025, DWR 1006, DWR 195, GW 1139, HD 4672, HD 4530, HD 2278, HD 1981, DDK 1001, HI 8627, Jay, TL 2942, DT 46, K 8020, DDK 1029, K 9107, K 816, Lok 1, MACS 6145, DDK 1009, NP 111 and NP 200) had shown immune reaction (0) whereas 150, 83 and 114 varieties have shown resistance (1-3), moderately susceptible (4-6) and highly susceptible (>6) response respectively against powdery mildew. Data indicated that there is an urgent need to broaden the genetic base of wheat by identifying and introgressing new sources of powdery mildew resistance. With limited sources of PM resistance available, above identified genotypes can be further used and characterized for resistance breeding programs in India

Isolation and identification of spore associated bacteria (SAB) from Glomus and Gigaspora spp. in coconut and arecanut based cropping systems

Arbuscular mycorrhizal symbiosis is exhibited by 80% of the terrestrial plants. The spores of arbuscular mycorrhizal fungi (AMF) form a unique microhabitat for the colonization by many species of bacteria. The present study was undertaken to isolate and identify spore associated bacteria (SAB) and evaluate their functional role in AMF-host interactions with respect to germination of spores. Coconut and arecanut based cropping systems under organic management practices in farmer’s field in Kasaragod district, Kerala and high density multi species cropping system (HDMSCS), CPCRI farm were selected for the study. The results revealed that AMF spore load of a particular cropping system increase with the number of intercrops. Spore associated bacteria (SAB) were isolated from the cytoplasm of surface sterilized spores of Glomus and Gigaspora spp. Identification based on BIOLOG and 16S rRNA sequencing revealed the presence of bacteria - Citrobacter amalonaticus, Staphylococcus arlettae, Bacillus subtilis, Bacillus amyloliquefaciens, in association with spores of Glomus spp. Corynebacterium coyleae, Bacillus cereus and Bacillus subtilis were found to be associated with Gigaspora spp. In vitro studies to determine the germination potential in spores showed the maximum results with Bacillus cereus GiPHD1 and Citrobacter amalonaticus GLNCB1 with 40% increase over control

Genetic Diversity of Genus \u3cem\u3eAvena\u3c/em\u3e in North Western-Himalayas assessed by Morphological Traits

Oat (Avena sativa L.) is a cool season, annual crop grown mainly in moist areas of temperate climates of the world serving as a food for mankind and forage for cattle. Oat is an important rabi fodder crop in India.In India, oat is also cultivated in Himalayan states like Kashmir, Himachal Pradesh and Uttarakhand. Oat in these regions have a wider adaptability, because of its excellent growing habitat, quick re-growth and better nutritional value (Misri, 2004). Oat breeding programme in Indian regions has not achieved much impetus due to a narrow genetic base of cultivated gene pool within the regionally adapted germplasm. The competition for utilization of land for food grains and fodder necessitates intensified efforts towards more efficient forage research and production, for which it is imperative to characterize and evaluate Avena species in order to identify donors for different traits and diversify primary oat gene pool. Historically, morphological traits have been important in the diversity analysis of crop species. The characterization of germplasm using morphological traits help the plant breeders to select the accessions to be utilized in hybridization programme. Considering the potential forage value of oats and limited genetic information available at morphological level, present study was aimed to assess the genetic diversity of genus Avena using morphological characterization. The information generated from this study will be helpful in characterizing the genus Avena germplasm and in the selection and utilization of diverse genotypes to enhance variability and productivity of commercial oat for future crop improvement endeavors in the Indian North-Western Himalayan region

Intubation Success through I-Gel® and Intubating Laryngeal Mask Airway® Using Flexible Silicone Tubes: A Randomised Noninferiority Trial

Introduction. The study aims to test whether flexible silicone tubes (FST) improve performance and provide similar intubation success through I-Gel as compared to ILMA. Our trial is registered in CTRI and the registration number is “CTRI/2016/06/006997.” Methods. One hundred and twenty ASA status I-II patients scheduled for elective surgical procedures needing tracheal intubation were randomised to endotracheal intubation using FST through either I-Gel or ILMA. In the ILMA group (n=60), intubation was attempted through ILMA using FST and, in the I-Gel group (n=60), FST was inserted through I-Gel airway. Results. Successful intubation was achieved in 36.67% (95% CI 24.48%–48.86%) on first attempt through I-Gel (n=22/60) compared to 68.33% (95% CI 56.56%–80.1%) in ILMA (n=41/60) (p=0.001). The overall intubation success rate was also lower with I-Gel group [58.3% (95% CI 45.82%–70.78%); n=35] compared to ILMA [90% (95% CI 82.41%–97.59%); n=54] (p<0.001). The number of attempts, ease of intubation, and time to intubation were longer with I-Gel compared to ILMA. There were no differences in the other secondary outcomes. Conclusion. The first pass success rate and overall success of FST through an I-Gel airway were inferior to those of ILMA