4,355 research outputs found

    The Properties of Field Elliptical Galaxies at Intermediate Redshift. I: Empirical Scaling Laws

    Get PDF
    We present measurements of the Fundamental Plane (FP) parameters (the effective radius, the mean effective surface brightness, and the central velocity dispersion) of six field elliptical galaxies at intermediate redshift. The imaging is taken from the Medium Deep Survey of the Hubble Space Telescope, while the kinematical data are obtained from long-slit spectroscopy using the 3.6-m ESO telescope. The Fundamental Plane appears well defined in the field even at redshift \approx 0.3. The data show a shift in the FP zero point with respect to the local relation, possibly indicating modest evolution, consistent with the result found for intermediate redshift cluster samples. The FP slopes derived for our field data, plus other cluster ellipticals at intermediate redshift taken from the literature, differ from the local ones, but are still consistent with the interpretation of the FP as a result of homology, of the virial theorem and of the existence of a relation between luminosity and mass, LMηL \propto M^{\eta}. We also derive the surface brightness vs. effective radius relation for nine galaxies with redshift up to z0.6z \approx0.6, and data from the literature; the evolution that can be inferred is consistent with what is found using the FP.Comment: 17 pages, including 9 figures, MNRAS, accepte

    Mangroves as a sustainable coastal defence

    Get PDF
    Mangroves effectively reduce the height of wind and swell waves over short distances (less than 500 m),\ud and can reduce storm surge water levels over greater distances (several kilometres of mangroves). Thus mangroves can\ud contribute to coastal defence strategies. However, their appropriate use depends on a thorough understanding of the\ud conditions under which they can provide these coastal defence services. Here we present a literature review of this\ud topic. Small wind and swell waves can be reduced in height by between 50 and 100% over 500 m of mangroves. Wave\ud reduction largely depends on water depth and vegetation structure and density. However, few measurements are\ud available for the reduction of bigger waves (> 70 cm in height) in deeper water (> 2 m). Storm surge water levels may\ud be reduced by between 5 cm and 50 cm per kilometre of mangrove, based on field measurements and validated\ud numerical models; water level reduction rates depend on the distance from the edge of the mangrove and the forward\ud speed of the cyclone, amongst other factors. Extreme events may severely damage or destroy mangroves, reducing their\ud effectiveness as a coastal defence. The use of mangroves in hybrid engineering can reduce flood risk: for example, a\ud mangrove foreshore in front of a sea wall/dyke will reduce wave impacts on the wall/dyke. The likelihood of waves\ud overtopping the sea wall or walls being breached is thus reduced, with an associated reduction in sea defence\ud maintenance costs. Therefore mangroves can contribute to coastal risk reduction, alongside other risk reduction\ud measures such as sea walls/dykes, early warning systems and evacuation plans. Additionally, mangroves can respond\ud dynamically to rising sea levels, in some cases maintaining their surface elevation with respect to local sea level; thus\ud they may act as a sustainable coastal defence in the face of rising sea levels and changing climatic patterns

    Evaluation of single tracks of 17-4PH steel manufactured at different power densities and scanning speeds by selective laser melting

    Get PDF
    Published ArticleIn Selective Laser Melting, the initial units produced are single tracks that overlap to create a single layer; from the sequence of layers, a 3D object is manufactured. The properties of the parts produced by SLM depend heavily on the properties of each single track and each layer formed by these tracks. This study evaluates the effect of processing parameters on the geometrical characteristics of single tracks manufactured from 17-4PH stainless steel powder. A single-mode continuous-wave ytterbium fibre laser was used to manufacture single tracks at laser powers in the range of 100-300 W with a constant spot size of ~80μm. The single tracks produced were subjected to standard metallographic preparation techniques for further analysis with an optical microscope. Deep molten pool shapes were observed at low scan speeds, while shallow molten pool shapes were observed at high scan speeds. At higher laser power densities, under-cutting and humping effects were also observed. The dimensions of single tracks processed without powder generally decrease with increasing scan speed at constant laser power. However, the geometrical features of the single tracks processed with powder revealed pronounced irregularities believed to be caused by non-homogeneity in the deposited powder layer

    Mathisson's helical motions for a spinning particle --- are they unphysical?

    Get PDF
    It has been asserted in the literature that Mathisson's helical motions are unphysical, with the argument that their radius can be arbitrarily large. We revisit Mathisson's helical motions of a free spinning particle, and observe that such statement is unfounded. Their radius is finite and confined to the disk of centroids. We argue that the helical motions are perfectly valid and physically equivalent descriptions of the motion of a spinning body, the difference between them being the choice of the representative point of the particle, thus a gauge choice. We discuss the kinematical explanation of these motions, and we dynamically interpret them through the concept of hidden momentum. We also show that, contrary to previous claims, the frequency of the helical motions coincides, even in the relativistic limit, with the zitterbewegung frequency of the Dirac equation for the electron

    Using Gravitational Lensing to study HI clouds at high redshift

    Full text link
    We investigate the possibility of detecting HI emission from gravitationally lensed HI clouds (akin to damped Lyman-α\alpha clouds) at high redshift by carrying out deep radio observations in the fields of known cluster lenses. Such observations will be possible with present radio telescopes only if the lens substantially magnifies the flux of the HI emission. While at present this holds the only possibility of detecting the HI emission from such clouds, it has the disadvantage of being restricted to clouds that lie very close to the caustics of the lens. We find that observations at a detection threshold of 50 micro Jy at 320 MHz (possible with the GMRT) have a greater than 20% probability of detecting an HI cloud in the field of a cluster, provided the clouds have HI masses in the range 5 X 10^8 M_{\odot} < M_{HI} < 2.5 X 10^{10} M_{\odot}. The probability of detecting a cloud increases if they have larger HI masses, except in the cases where the number of HI clouds in the cluster field becomes very small. The probability of a detection at 610 MHz and 233 MHz is comparable to that at 320 MHz, though a definitive statement is difficult owing to uncertainties in the HI content at the redshifts corresponding to these frequencies. Observations at a detection threshold of 2 micro Jy (possible in the future with the SKA) are expected to detect a few HI clouds in the field of every cluster provided the clouds have HI masses in the range 2 X 10^7 M_{\odot} < M_{HI} < 10^9 M_{\odot}. Even if such observations do not result in the detection of HI clouds, they will be able to put useful constraints on the HI content of the clouds.Comment: 21 pages, 7 figures, minor changes in figures, accepted for publication in Ap

    Seeking the Ultraviolet Ionizing Background at z~3 with the Keck Telescope

    Full text link
    We describe the initial results of a deep long-slit emission line search for redshifted (2.7<z<4.1) Lyman-alpha. These observations are used to constrain the fluorescent Ly-alpha emission from the population of clouds whose absorption produces the higher-column-density component of the Ly-alpha forest in quasar spectra. We use the results to set an upper limit on the ultraviolet ionizing background. Our spectroscopic data obtained with the Keck II telescope at lambda/(Delta lambda FWHM)~2000 reveals no candidate Ly-alpha emission over the wavelength range of 4500-6200 Ang along a 3 arcmin slit in a 5400 s integration. Our 3 sigma upper bound on the mean intensity of the ionizing background at the Lyman limit is J(nu 0) < 2E-21 erg/s/cm**2/Hz/sr for 2.7<z<3.1 (where we are most sensitive), assuming Lyman limit systems have typical radii of 70 kpc (q_0=0.5, H_0=50 km/s/Mpc). This constraint is more than an order of magnitude more stringent than any previously published direct limit. However, it is still a factor of three above the ultraviolet background level expected due to the integrated light of known quasars at z~3. This pilot study confirms the conclusion of Gould \& Weinberg (1996) that integrations of several hours on a 10-m class telescope should be capable of measuring J(nu 0) at high redshift.Comment: 22 pages, 2 postscipt figures. Latex requires aaspp4.sty and epsf.sty (included). Accepted for publication in the Astronomical Journal (Nov 1998

    Ellipticals with Kinematically-Distinct Cores: (V-I) Color Images with WFPC2

    Get PDF
    We have analysed HST/WFPC2 F555W and F814W images for fifteen elliptical galaxies with kinematically-distinct cores. For each of them we have derived surface brightness and isophotal parameter profiles in the two bands, color maps, and radial profiles in (V-I). We have detected photometric evidence for faint stellar disks, on scales of a few tens to a few arcseconds, in seven galaxies, namely NGC 1427, 1439, 1700, 4365, 4406, 4494 and 5322. In NGC 1700, the isophotes are slightly boxy at the scale of the counter-rotating component, and disky at larger radii. We find no difference in (V-I) color greater than 0.02 mag between these disks and the surrounding galactic regions. Hence the stellar populations in the kinematically distinct cores are not strongly deviant from the population of the main body. For one galaxy, NGC 4365, the innermost region is bluer than the surrounding regions. This area extends to about 15pc, and contains a luminosity of 2.5x10^6 L_\odot. If interpreted as a stellar population effect, an age difference of \sim 3-4 Gyrs, or an [Fe/H][Fe/H] variation of about 0.2 dex, is derived. The nuclear intensity profiles show a large variety: some galaxies have steep cusp profiles, others have shallow cusps and a ``break radius''. The nuclear cusps of galaxies with kinematically-distinct cores follow the same trends as the nuclei of normal galaxies. We have not been able to identify a unique, qualifying feature in the WFPC2 images which distinguish the galaxies with kinematically distinct cores from the kinematically normal cores. [shortened]Comment: 56 pages, latex, 17 figures; figure 1 available upon request; ApJ, 481 in pres

    VLT identification of the optical afterglow of the gamma-ray burst GRB 000131 at z=4.50

    Get PDF
    We report the discovery of the gamma-ray burst GRB 000131 and its optical afterglow. The optical identification was made with the VLT 84 hours after the burst following a BATSE detection and an Inter Planetary Network localization. GRB 000131 was a bright, long-duration GRB, with an apparent precursor signal 62 s prior to trigger. The afterglow was detected in ESO VLT, NTT, and DK1.54m follow-up observations. Broad-band and spectroscopic observations of the spectral energy distribution reveals a sharp break at optical wavelengths which is interpreted as a Ly-alpha absorption edge at 6700 A. This places GRB 000131 at a redshift of 4.500 +/- 0.015. The inferred isotropic energy release in gamma rays alone was approximately 10^54 erg (depending on the assumed cosmology). The rapid power-law decay of the afterglow (index alpha=2.25, similar to bursts with a prior break in the lightcurve), however, indicates collimated outflow, which relaxes the energy requirements by a factor of < 200. The afterglow of GRB 000131 is the first to be identified with an 8-m class telescope.Comment: 8 pages, 7 figures, accepted to A&A Letter
    corecore