Inducing hardening and healability in poly(ethylene-co-acrylic acid) via blending with complementary low molecular weight additives

The design and synthesis of low molecular weight additives based on self-assembling nitroarylurea units, and their compatibility with poly(ethylene-co-acrylic acid) copolymers are reported. The self-assembly properties of the low molecular weight additives have been demonstrated in a series of gelation studies. Upon blending at low percentage weights (≤ 5%) with poly(ethylene-co-acrylic acid) the additives were capable of increasing the stress and strain to failure when compared to the parent copolymer. By varying the percentage weight of the additive as well as the type of additive the mechanical properties of poly(ethylene-co-acrylic acid) could be tailored. Finally, the healability characteristics of the blends were improved when compared to the original polymer via the introduction of a supramolecular ‘network within a network’

Observing other pedestrians: Investigating the typical distance and duration of fixation

After dark, road lighting should enhance the visual component of pedestrians’ interpersonal judgements such as evaluating the intent of others. Investigation of lighting effects requires better understanding of the nature of this task as expressed by the typical distance at which the judgement is made (and hence visual size) and the duration of observation, which in past studies have been arbitrary. Better understanding will help with interpretation of the significance of lighting characteristics such as illuminance and light spectrum. Conclusions of comfort distance in past studies are not consistent and hence this article presents new data determined using eye-tracking. We propose that further work on interpersonal judgements should examine the effects of lighting at a distance of 15 m with an observation duration of 500 ms

Sequence-selective assembly of tweezer-molecules on linear templates enables frameshift-reading of sequence information

Monomer-sequence information in synthetic copolyimides can be recognised by tweezer-type molecules binding to adjacent triplet-sequences on the polymer chains. In the present paper different tweezer-molecules are found to have different sequence-selectivities, as demonstrated in solution by 1H NMR spectroscopy and in the solid state by single crystal X-ray analyses of tweezer-complexes with linear and macrocyclic oligo-imides. This work provides clear-cut confirmation of polyimide chain-folding and adjacent-tweezer-binding. It also reveals a new and entirely unexpected mechanism for sequence-recognition which, by analogy with a related process in biomolecular information processing, may be termed "frameshift-reading". The ability of one particular tweezer-molecule to detect, with exceptionally high sensitivity, long-range sequence-information in chain-folding aromatic copolyimides, is readily explained by this novel process

Evaluation of the Workplace Environment in the UK, and the Impact on Users’ Levels of Stimulation

The purpose of this study is to evaluate a number of recently completed workplaces in the UK. The first aim is to assess the impact of various aspects of the workplace environment on users’ levels of stimulation. The body of previous research undertaken into the workplace environment, identified the aspects to be investigated. Samples of employees from the sixteen businesses were surveyed to determine their perceptions of the workplaces. The results were entered into a regression analysis, and the most significant predictors of perceived stimulation identified. The data also revealed a dramatic reduction in staff arousal levels from mornings to afternoons. Thus, there is a second aim to determine whether changes to significant aspects of the workplace environment during the day can counteract the reduction in users’ stimulation. Two further workplaces were studied to enable changes to be made over a 12-week period. A sample of employees completed questionnaires, and semi-structured interviews revealed the reasons behind the results. It was found that provision of artwork, personal control of temperature and ventilation and regular breaks were the most significant contributions to increasing stimulation after lunch; while user choice of layout, and design and décor of workspaces and break areas, were the most significant aspects at design stage

Key features of palliative care service delivery to Indigenous peoples in Australia, New Zealand, Canada and the United States: A comprehensive review

Background: Indigenous peoples in developed countries have reduced life expectancies, particularly from chronic diseases. The lack of access to and take up of palliative care services of Indigenous peoples is an ongoing concern. Objectives: To examine and learn from published studies on provision of culturally safe palliative care service delivery to Indigenous people in Australia, New Zealand (NZ), Canada and the United States of America (USA); and to compare Indigenous peoples’ preferences, needs, opportunities and barriers to palliative care. Methods: A comprehensive search of multiple databases was undertaken. Articles were included if they were published in English from 2000 onwards and related to palliative care service delivery for Indigenous populations; papers could use quantitative or qualitative approaches. Common themes were identified using thematic synthesis. Studies were evaluated using Daly’s hierarchy of evidence-for-practice in qualitative research. Results: Of 522 articles screened, 39 were eligible for inclusion. Despite diversity in Indigenous peoples’ experiences across countries, some commonalities were noted in the preferences for palliative care of Indigenous people: to die close to or at home; involvement of family; and the integration of cultural practices. Barriers identified included inaccessibility, affordability, lack of awareness of services, perceptions of palliative care, and inappropriate services. Identified models attempted to address these gaps by adopting the following strategies: community engagement and ownership; flexibility in approach; continuing education and training; a whole-of-service approach; and local partnerships among multiple agencies. Better engagement with Indigenous clients, an increase in number of palliative care patients, improved outcomes, and understanding about palliative care by patients and their families were identified as positive achievements. Conclusions: The results provide a comprehensive overview of identified effective practices with regards to palliative care delivered to Indigenous populations to guide future program developments in this field. Further research is required to explore the palliative care needs and experiences of Indigenous people living in urban areas

Combining Genomics and Metabolomics for the Discovery of Regulatory Genes and Their Use in Metabolic Engineering to Produce ‘Healthy Foods’

Plants often accumulate their natural products to relatively low levels, so there is a lot of interest in breeding or engineering plants that produce higher levels. It has been shown that the most effective way to increase the accumulation of secondary metabolites is to increase the activity of genes that regulate the activity of the biosynthetic pathways that make different natural products. Regulatory genes of this type encode proteins called transcription factors. The biggest bottleneck in using this strategy to develop plants that accumulate significantly higher levels of important natural products is that not many transcription factors regulating secondary metabolism have yet been identified at the molecular level. Genes encoding transcription factors can be identified from model plants with sequenced genomes. The ability of such genes to regulate metabolism can be assayed by examination of mutants (reverse genetics) and by investigating the metabolic effects of high levels of expression of the genes. The combined techniques of metabolic fingerprinting and metabolite profiling of mutant and transgenic plants are allowing us to identify new genes encoding transcription factors controlling secondary metabolism, that can be used as tools for engineering natural product accumulatio

Length of carotid stenosis predicts peri-procedural stroke or death and restenosis in patients randomized to endovascular treatment or endarterectomy.

BACKGROUND: The anatomy of carotid stenosis may influence the outcome of endovascular treatment or carotid endarterectomy. Whether anatomy favors one treatment over the other in terms of safety or efficacy has not been investigated in randomized trials. METHODS: In 414 patients with mostly symptomatic carotid stenosis randomized to endovascular treatment (angioplasty or stenting; n = 213) or carotid endarterectomy (n = 211) in the Carotid and Vertebral Artery Transluminal Angioplasty Study (CAVATAS), the degree and length of stenosis and plaque surface irregularity were assessed on baseline intraarterial angiography. Outcome measures were stroke or death occurring between randomization and 30 days after treatment, and ipsilateral stroke and restenosis ≥50% during follow-up. RESULTS: Carotid stenosis longer than 0.65 times the common carotid artery diameter was associated with increased risk of peri-procedural stroke or death after both endovascular treatment [odds ratio 2.79 (1.17-6.65), P = 0.02] and carotid endarterectomy [2.43 (1.03-5.73), P = 0.04], and with increased long-term risk of restenosis in endovascular treatment [hazard ratio 1.68 (1.12-2.53), P = 0.01]. The excess in restenosis after endovascular treatment compared with carotid endarterectomy was significantly greater in patients with long stenosis than with short stenosis at baseline (interaction P = 0.003). Results remained significant after multivariate adjustment. No associations were found for degree of stenosis and plaque surface. CONCLUSIONS: Increasing stenosis length is an independent risk factor for peri-procedural stroke or death in endovascular treatment and carotid endarterectomy, without favoring one treatment over the other. However, the excess restenosis rate after endovascular treatment compared with carotid endarterectomy increases with longer stenosis at baseline. Stenosis length merits further investigation in carotid revascularisation trials

Small Changes in the Primary Structure of Transportan 10 Alter the Thermodynamics and Kinetics of its Interaction with Phospholipid Vesicles

ABSTRACT: The kinetics and thermodynamics of binding of transportan 10 (tp10) and four of its variants to phospholipid vesicles, and the kinetics of peptide-induced dye efflux, were compared. Tp10 is a 21-residue, amphipathic, cationic, cell-penetrating peptide similar to helical antimicrobial peptides. The tp10 variants examined include amidated and free peptides, and replacements of tyrosine by tryptophan. Carboxy-terminal amidation or substitution of tryptophan for tyrosine enhance binding and activity. The Gibbs energies of peptide binding to membranes determined experimentally and calculated from the interfacial hydrophobicity scale are in good agreement. The Gibbs energy for insertion into the bilayer core was calculated using hydrophobicity scales of residue transfer from water to octanol and to the membrane/ water interface. Peptide-induced efflux becomes faster as the Gibbs energies for binding and insertion of the tp10 variants decrease. If anionic lipids are included, binding and efflux rate increase, as expected because all tp10 variants are cationic and an electrostatic component is added. Whether the most important effect of peptide amidation is the change in charge or an enhancement of helical structure, however, still needs to be established. Nevertheless, it is clear that the changes in efflux rate reflect the differences in the thermodynamics of binding and insertion of the free and amidated peptide groups. We have recently reported a detailed investigation (1) o

Comprehensive extraction method integrated with NMR metabolomics: a new bioactivity screening method for plants, adenosine A1 receptor binding compounds in Orthosiphon stamineus benth

A large number of plant metabolites has provided as an incomparable chemical source for drug development. However, the wide range of the polarity of metabolites has been a big obstacle for full use of the chemical diversity. The initial step conventional extraction method by a single solvent does not make use of all the metabolites contained in plants. Also, it takes a long time to confirm the target activity of a single compound because of tedious separation steps. To solve the problem, a new extraction method coupled to NMR-based metabolomics is applied to identify bioactive natural products. A comprehensive extraction method consisting of a continuous flow of solvent mixtures through plant material was developed to provide extracts with a wider chemical variety than those yielded with a single solvent extraction. As the model experiment, 1H NMR spectra of the extracts obtained from the comprehensive extraction of Orthosiphon stamineus were subjected to multivariate data analysis to find its adenosine A1 binding activity. On the basis of the results, two flavonoids from a large number of chemicals were clearly verified to show the adenosine A1 binding activity without any further purification steps. This method could provide a solution to the major drawbacks of natural products in drug development