83 research outputs found
Rocking curve measurements revisited
The study of materials by diffraction methods started about 100 years ago with the pioneering experiment of Laue, Friedrich and Knipping, when the first X-ray diffraction patterns of single crystals were obtained (Friedrich et al., 1912). This was the beginning of a rapid development fostering many diffraction-based methods and techniques, which is still continuing. The measurement of rocking curves and the associated derived quantitative parameters, such as the ‘full width at half-maximum’ (FWHM) of the curves, has been performed since at least 1921 (Davis & Stempel, 1921) by exploiting the X-ray diffraction (XRD) properties of crystals. Since then, this has become one of the most powerful methods for the diffraction-based characterization of crystalline materials. The experimentally closely related method of X-ray diffraction imaging or X-ray diffraction topography has been used since about 1931 (Berg, 1931). Soon after World War II, the requirements of the electronics industry for the nondestructive analysis of defects in semiconductor materials like silicon and germanium (and others) boosted the improvement of these methods to their modern high-resolution variants like high-resolution X-ray diffraction and in particular high-resolution and high strain sensitivity X-ray topography (Bond & Andrus, 1952; Lang, 1957). This evolution was additionally accelerated in the late 1970s by the use of synchrotrons as dedicated X-ray sources and later on, starting in the 1990s, by the use of third-generation synchrotron sources...
Thermodiffusion in multicomponent n-alkane mixtures
Compositional grading within a mixture has a strong impact on the evaluation of the pre-exploitation distribution of hydrocarbons in underground layers and sediments. Thermodiffusion, which leads to a partial diffusive separation of species in a mixture due to the geothermal gradient, is thought to play an important role in determining the distribution of species in a reservoir. However, despite recent progress, thermodiffusion is still difficult to measure and model in multicomponent mixtures. In this work, we report on experimental investigations of the thermodiffusion of multicomponent n-alkane mixtures at pressure above 30 MPa. The experiments have been conducted in space onboard the Shi Jian 10 spacecraft so as to isolate the studied phenomena from convection. For the two exploitable cells, containing a ternary liquid mixture and a condensate gas, measurements have shown that the lightest and heaviest species had a tendency to migrate, relatively to the rest of the species, to the hot and cold region, respectively. These trends have been confirmed by molecular dynamics simulations. The measured condensate gas data have been used to quantify the influence of thermodiffusion on the initial fluid distribution of an idealised one dimension reservoir. The results obtained indicate that thermodiffusion tends to noticeably counteract the influence of gravitational segregation on the vertical distribution of species, which could result in an unstable fluid column. This confirms that, in oil and gas reservoirs, the availability of thermodiffusion data for multicomponent mixtures is crucial for a correct evaluation of the initial state fluid distribution
Prevalence and mechanisms of resistance to carbapenems in Enterobacteriaceae
Objectives: To determine the point prevalence of carbapenem-non-susceptible Enterobacteriaceae (CNSE) and carbapenemase-producing Enterobacteriaceae (CPE) isolates among hospitalized patients in Belgium.
Methods: Twenty-four hospital-based laboratories prospectively collected 200 non-duplicated Enterobacteriaceae isolates from clinical specimens of hospitalized patients over a 2 month period. All isolates were screened locally for decreased susceptibility to carbapenem drugs using a disc diffusion method according to CLSI interpretative criteria. CNSE strains were referred centrally for confirmation of carbapenemase by phenotypic and molecular testing.
Results: From February to April 2012, 158 of the 4564 screened Enterobacteriaceae isolates were categorized as non-susceptible to carbapenems, resulting in a point prevalence of CNSE of 3.5% (95% CI: 2.9%–4.2%; range per centre: 0.5%–8.5%). Of the 125 referred CNSE isolates, 11 Klebsiella pneumoniae isolates [OXA-48 (n=7), KPC type (n=3) and NDM type (n=1)], 1 OXA-48-positive Escherichia coli isolate and 1 KPC-positive Klebsiella oxytoca isolate were detected in eight hospitals. None of the 72 carbapenem-non-susceptible Enterobacter spp. isolates were confirmed as CPE. The minimal estimated point prevalence of CPE isolates was 0.28% (13/ 4564; 95% CI: 0.13%–0.44%) overall (range per centre: 0%–1.5%).
Conclusions: Despite the overall low prevalence of CNSE found in this study, the detection of CPE isolates in one-third of the participating centres raises concerns and highly suggests the spread and establishment of CPE in Belgian hospitals
European Space Agency experiments on thermodiffusion of fluid mixtures in space
Abstract.: This paper describes the European Space Agency (ESA) experiments devoted to study thermodiffusion of fluid mixtures in microgravity environment, where sedimentation and convection do not affect the mass flow induced by the Soret effect. First, the experiments performed on binary mixtures in the IVIDIL and GRADFLEX experiments are described. Then, further experiments on ternary mixtures and complex fluids performed in DCMIX and planned to be performed in the context of the NEUF-DIX project are presented. Finally, multi-component mixtures studied in the SCCO project are detailed
T4-Related Bacteriophage LIMEstone Isolates for the Control of Soft Rot on Potato Caused by ‘Dickeya solani’
The bacterium ‘Dickeya solani’, an aggressive biovar 3 variant of Dickeya dianthicola, causes rotting and blackleg in potato. To control this pathogen using bacteriophage therapy, we isolated and characterized two closely related and specific bacteriophages, vB_DsoM_LIMEstone1 and vB_DsoM_LIMEstone2. The LIMEstone phages have a T4-related genome organization and share DNA similarity with Salmonella phage ViI. Microbiological and molecular characterization of the phages deemed them suitable and promising for use in phage therapy. The phages reduced disease incidence and severity on potato tubers in laboratory assays. In addition, in a field trial of potato tubers, when infected with ‘Dickeya solani’, the experimental phage treatment resulted in a higher yield. These results form the basis for the development of a bacteriophage-based biocontrol of potato plants and tubers as an alternative for the use of antibiotics
Counteracting Quasispecies Adaptability: Extinction of a Ribavirin-Resistant Virus Mutant by an Alternative Mutagenic Treatment
[Background] Lethal mutagenesis, or virus extinction promoted by mutagen-induced elevation of mutation rates of viruses,
may meet with the problem of selection of mutagen-resistant variants, as extensively documented for standard, nonmutagenic
antiviral inhibitors. Previously, we characterized a mutant of foot-and-mouth disease virus that included in its
RNA-dependent RNA polymerase replacement M296I that decreased the sensitivity of the virus to the mutagenic nucleoside
analogue ribavirin.[Methodology and Principal Findings] Replacement M296I in the viral polymerase impedes the extinction of the mutant
foot-and-mouth disease virus by elevated concentrations of ribavirin. In contrast, wild type virus was extinguished by the
same ribavirin treatment and, interestingly, no mutants resistant to ribavirin were selected from the wild type populations.
Decreases of infectivity and viral load of the ribavirin-resistant M296I mutant were attained with a combination of the
mutagen 5-fluorouracil and the non-mutagenic inhibitor guanidine hydrocloride. However, extinction was achieved with a
sequential treatment, first with ribavirin, and then with a minimal dose of 5-fluorouracil in combination with guanidine
hydrochloride. Both, wild type and ribavirin-resistant mutant M296I exhibited equal sensitivity to this combination,
indicating that replacement M296I in the polymerase did not confer a significant cross-resistance to 5-fluorouracil. We
discuss these results in relation to antiviral designs based on lethal mutagenesis[Conclusions] (i) When dominant in the population, a mutation that confers partial resistance to a mutagenic agent can
jeopardize virus extinction by elevated doses of the same mutagen. (ii) A wild type virus, subjected to identical high
mutagenic treatment, need not select a mutagen-resistant variant, and the population can be extinguished. (iii) Extinction
of the mutagen-resistant variant can be achieved by a sequential treatment of a high dose of the same mutagen, followed
by a combination of another mutagen with an antiviral inhibitor.Work supported by grants BFU2005-00863, BFU2008-02816/BMC, Proyecto Intramural de Frontera del CSIC 200820FO191, FIPSE 36558/06, and
Fundacio´n Ramo´n Areces. CIBERehd is funded by Instituto de Salud Carlos III. The funders had no role in study design, data collection and analysis, decision to
publish, or preparation of the manuscriptPeer reviewe
Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM
Digital manufacturing of biocompatible metal frameworks for complex dental prostheses by means of SLS/SLM
- …