Study of the Effect of Water Depth on Potential Flow Solution of the OC4 Semisubmersible Floating Offshore Wind Turbine

AbstractThis work aims at assessing the influence of water depth on the potential flow solution for a semisubersible floating offshore wind turbine. More specifically, the system developed for the Offshore Code Comparison Collaboration Continuation (OC4) of the Inter- national Energy Agency IEA was considered for this paper. This work has been inspired by previous studies concerning the effect of shallow water on Liquified Natural Gas Carriers (LNGC). The influence of water depth on the hydrodynamics of such systems is evident from measurements as well as from simulations, specifically when secondary effects in the wave and flow modelling are addressed. This scenario has motivated the comparative study for the Floating Wind Turbine herein reported, also taking into account second order hydrodynamics (Quadratic Transfer Functions, QTF) as well as low frequency contribution in the incoming wave, due to shallow water (Setdown effect). The simulations were conducted relying on the codes DIFFRAC and aNySIM, de- veloped at Maritime Research Institute of Netherlands (MARIN) and the results are presented for a range of water depth between the nominal value of 200 m and the extreme shallow water of 30 m

Full scale monitoring of the twin chimneys of the rovinari power plant

The presented paper deals with the structural identification and monitoring of two twin chimneys in very close arrangement. Due to twin arrangement, important interference effects are expected to modify the chimney response to wind action, causing vortex shedding and state-dependent excitation associated to the oscillatory motion of the leeward chimney, in and out of the windward chimney wake. The complexity of the physics of this problem is increased by the dependency of the aerodynamics of circular cylinders on Reynolds number; however, there is a weakness of literature about cylinders behaviour at critical and super-critical range of Reynolds number, due to experimental limitations. Also the International Committee on Industrial Chimneys (CICIND) does not provide, at present, any specific technical guideline about twin chimneys whose interaxis distance is less or equal two times the diameter, as in this case. For this reason a Tuned Mass Damper (TMD) has been installed in order to increase the damping of the chimney, as merely suggested. This work aims at assessing the effectiveness of the installed TMD and characterizing the tower dynamic behaviour itself due to the wind excitation, as well as providing full scale measurements for twin cylinders configuration at high Reynolds numbers

Design of a 6-DoF Robotic Platform for Wind Tunnel Tests of Floating Wind Turbines

AbstractSophisticated computational aero-hydro-elastic tools are being developed for simulating the dynamics of Floating Offshore Wind Turbines (FOWTs). The reliabilty of such prediction tools for designers requires experimental validation. To this end, due to the lack of a large amount of full scale data available, scale tests represent a remarkable tool. Moreover, due to the combined aerodynamic and hydrodynamic contributions to the dynamics of FOWTs, experimental tests should take into account both. This paper presents the design process of a 6-Degrees-of-Freedom robot for simulating the dynamics of FOWTs in wind tunnel scale experiments, as a complementary approach with respect to ocean wind-wave basin scale tests. Extreme events were considered for the definition of the robot requirements and performance. A general overview on the possible design solutions is reported, then the machine architecture as well as the kinematic and dynamic analysis is discussed. Also a motion task related to a 5-MW Floating Offshore Wind Turbine nominal operating condition was considered and then the ability of the robot to reproduce such motions verified in terms of maximum displacements, forces and power, to be within the design boundaries

Synthesis and Characterization of New 2-Quinolone Sulfonamide Derivatives

A series of new 2-quinolone derivatives linked to benzene sulphonyl moieties were performed by many steps: the first step involved preparation of different coumarins (A1,A2) by condensation of different substituted phenols with ethyl acetoacetate. The compound A1 was treated with nitric acid to afford two isomers of nitrocoumarin derivatives (A3) and (A4). The prepared compounds (A2, A3) were treated with hydrazine hydrate to synthesize different 2-quinolone compounds (A5,A6) while the coumarin treated with different amines gave compounds (A7,A8). Then the synthesized 2-quinolone compounds (A5-A8) treated with benzene sulphonyl chloride to afford new sulfonamide derivatives (A9-A12). The synthesized compounds were characterized by FT-IR, 1H-NMR, 13C-NMR spectra and by measurement some of their physical properties

SYNTHESIS OF 4-BENZYLIDENE-2-(4-NITRO- PHENYL) - 4H-OXAZOL-5 -ONE DERIVATIVES WITH SUSPECTED BIOLOGICAL ACTIVITY

Oxazolones are five membered heterocyclic compounds containing nitrogen and oxygen as heteroatoms.The C-2 and C-4 positions of the oxazolone are crucial for their various biological activities. A series of oxazolone derivatives (1-11) have been synthesized as potential antibacterial and fungal agent. The newly synthesized compounds were evaluated. compounds have been prepared by the condensation of 4-nitrobenzoylglycine or benzoyl glycine  with aromatic aldehydes in the presence of ethanol, acetic anhydride and glacial acetic acid. The newly synthesized compounds were characterized by FTIR, ¹HNMR, C¹³NMR. Keywords:- Oxazolone, antibacterial and fungal agent, Synthesis

Dependence of gamma-ray absorption coefficient on the size of lead particle

In this study, dependence of gamma-ray absorption coefficient on the size of Pb particle size ranging from 200µm up to 2.5mm, using different weights of each particle size. The results show that gamma-ray attenuation coefficient is inversely proportional with the size of Pb particle size due to the reduction of the spaces between the lead particles

Copolymerazaion of N-vinyl-2-pyrrolidon with Acrylic Acid and Methylmethacrylate

Low conversion copolymerization of N-vinyl-2-pyrrolidon M.W = (111.14) VP (monomer-1) has been conducted with acrylic acid AA and methymethacrylate MMA in ethanol at 70ºC , using Benzoyl peroxide BPO as initiator . The copolymer composition has been determined by elemental analysis. The monomer reactivity ratios have been calculated by the Kelen-Tudos and Finman-Ross graphical procedures . The derived reactivity ratios (r1 , r2 ) are : (0.51 , 4.85) for (VP / AA ) systems and (0.34 , 7.58) for (VP , MMA) systems , and found the reactivity ratios of the monomer AA , MMA is mor than the monomer VP in the copolymerization of (VP / AA) and (VP /MMA) systems respectly . The reactivity ratios values were used for microstructures calculation

On the functional design of the DTU10 MW wind turbine scale model of LIFES50+ project

This paper illustrates the mechatronic design of the wind tunnel scale model of the DTU 10MW reference wind turbine, for the LIFES50+ H2020 European project. This model was designed with the final goal of controlling the angle of attack of each blade by means of miniaturized servomotors, for implementing advanced individual pitch control (IPC) laws on a Floating Offshore Wind Turbine (FOWT) 1/75 scale model. Many design constraints were to be respected: among others, the rotor-nacelle overall mass due to aero-elastic scaling, the limited space of the nacelle, where to put three miniaturized servomotors and the main shaft one, with their own inverters/controllers, the slip rings for electrical rotary contacts, the highest stiffness as possible for the nacelle support and the blade-rotor connections, for ensuring the proper kinematic constraint, considering the first flapwise blade natural frequency, the performance of the servomotors to guarantee the wide frequency band due to frequency scale factors, etc. The design and technical solutions are herein presented and discussed, along with an overview of the building and verification process. Also a discussion about the goals achieved and constraints respected for the rigid wind turbine scale model (LIFES50+ deliverable D.3.1) and the further possible improvements for the IPC-aero-elastic scale model, which is being finalized at the time of this paper

Preparation and Identification of some new Pyrazolopyrin derivatives and their Polymerizations study

Preparation and Identification of some new Pyrazolopyrin derivatives and their Polymerizations stud