An Epidemiological Survey of the Suicide Incidence Trends in the Southwest Iran: 2004-2009

Background : Elimination of suicide attempts is impossible, but they can be reduced dramatically by an organized planning. The present study aimed to survey the suicide trends in Fars province (Iran), during 2004-2009 to better understand the prevalence and status of suicide. Methods: This survey was a cross-sectional study. The demographic data were collected from the civil status registry between 2004 and 2009. Suicide and suicide attempt data were collected of three sources including the affiliated hospitals of Shiraz University of Medical Sciences, mortality data of Vice Chancellery of Health in Fars province and data from forensic medicine. Then, they were analyzed by Excel and SPSS. Chi-square and regression analyses were used for data analysis. Results: During the study, 10671 people attempted suicide, of which 5697 (53%) were women and 4974 (47%) were men. Among them, 1047 people (9.8%) died, of which 363 (34%) were women and 679 (64%) were men. There was a significant relationship between gender and fatal suicide. The mean suicide attempt for both genders was 53 per 100,000 and 49, 57 for men and women, respectively. The trends in the incidence of Suicidal attempts were decreasing. Conclusion: Without implementing effective preventive measures, the health care system in Iran will face a further burden of fatal suicides among young people. Therefore; enhancing the primary health care and specialized mental health services for those with unsuccessful suicide attempts can effectively reduce the burden of suicide

Effect of lateral oblique cyclic loading on microleakage and screw loosening of implants with different connections

Background. The implant connection type might affect microleakage and screw loosening in two-piece implants. The aim of this study was to measure microleakage and screw loosening of two connections of Noble Biocare implant system before and after cyclic loading. Methods. Twelve samples were categorized into two groups: external hexagon (Branemark) and internal hexagon connection (Noble Active) and two implants as controls. The abutments were tightened to a 35 Ncm torque. Initial torque loss (ITL) was measured five minutes after retightening the abutment, using a digital torque wrench. The samples were covered with putty material to the abutment‒implant junction. Customized metal crowns with 45° inclinations were placed on the abutments and cyclic loading was performed accordingly. Thereafter, the secondary torque loss (STL) was measured. Microleakage test was also performed. Data were analyzed with Mann-Whitney and Wilcoxon tests (α=0.05). Results. There were no statistically significant differences between the two phases of gamma counting between and within two groups (P>0.05). However, STL after cyclic loading was less than ITL in both groups (P=0.042). Conclusion. Connection type and cyclic loading had no significant effect on microleakage. Furthermore, the internal connection had less TL as compared to the external connection. In addition, the STLs were less than ITLs in both groups

Low-temperature, high-speed reactive deposition of metal oxides for perovskite solar cells

Nickel oxide (NiO) and titanium dioxide (TiO2) charge-extraction layers are fabricated under a partial pressure of O2 from nickel and titanium metals using a reactive electron-beam evaporation process. Using such materials, inverted architecture perovskite solar cells incorporating a NiO hole-transport layer achieve power conversion efficiencies up to 15.8%, whilst standard architecture devices using a TiO2 electron-transport layer achieve a power conversion efficiency up to 13.9%. Critically, we find that such metal oxides can be deposited at high speed (nm s−1) and at low substrate-temperature, and do not require a high-temperature anneal step after deposition, making reactive electron-beam evaporation compatible with roll-to-roll processing on sensitive flexible polymeric substrates

Effect of curing time on the microstructure and mechanical strength development of alkali activated binders based on vitreous calcium aluminosilicate (VCAS)

The aim of this paper is to study the influence of curing time on the microstructure and mechanical strength development of alkali activated binders based on vitreous calcium aluminosilicate (VCAS). Mechanical strength of alkali activated mortars cured at 65 °C was assessed for different curing times (4¿168 h) using 10 molal NaOH solution as alkaline activator. Compressive strength values around 77 MPa after three days of curing at 65 °C were obtained. 1·68 MPa/h compressive strength gain rate was observed in the first 12 h, decreasing to 0·95 MPa/h for the period of 12¿72 h. The progress of geopolymeric reaction was monitored by means of TGA and, electrical conductivity and pH measurements in an aqueous suspension. Significant decrease in pH and electrical conductivity were observed in the 4¿72 h period, demonstrating the geopolymerization process. Furthermore, SEM images showed an important amount of (N, C)ASH gel and low porosity of the developed matrix.To the Ministerio de Ciencia e Innovacion (MICINN) of the Spanish Government (BIA2011-26947) and also to FEDER for funding and to Vitrominerals company for supplying VCAS samples.Mitsuuchi Tashima, M.; Soriano Martínez, L.; Borrachero Rosado, MV.; Monzó Balbuena, JM.; Paya Bernabeu, JJ. (2013). Effect of curing time on the microstructure and mechanical strength development of alkali activated binders based on vitreous calcium aluminosilicate (VCAS). Bulletin of Materials Science. 36:245-249. https://doi.org/10.1007/s12034-013-0466-zS24524936Bernal S A, Gutiérrez R M, Pedraza A L, Provis J L, Rodriguez E D and Delvasto S 2011 Cem. Concr. Res. 41 1Criado M, Fernández-Jiménez A, Sobrados I, Palomo A and Sanz J 2011 J. Eur. Ceram. Soc. avaiable onlineDavidovits J 2008 Geopolymer chemistry and applications Institute Geopolymere, Saint-Quentin, FranceDuxson P, Fernández-Jiménez A, Provis J L, Lukey G C, Palomo A and van Deventer J S J 2007 J. Mater. Sci. 47 2917Fernández-Jiménez A, Palomo A and Criado M 2005 Cem. Concr. Res. 35 1204Hossain A B, Shrazi S A, Persun J and Neithalath N 2008 J. Transp. Res. Board 2070 32Komnitsas K and Zaharaki D 2007 Miner. Eng. 20 1261Lampris C, Lupo R and Cheeseman C R 2009 Waste Manage. 29 368Lin T, Jia D, Wang M, He P and Liang D 2009 Bull. Mater. Sci. 32 77Lloyd R R, Provis J L and van Deventer J S J 2009 J. Mater. Sci. 44 608Marín-López C, Reyes Araiza J L, Manzano-Ramírez A, Rubio Avalos J C, Perez-Bueno J J, Muñiz-Villareal M S, Ventura-Ramos E and Vorobiev Y 2009 Inorg. Mater. 45 1429Najafi Kani E, Allahverdi A and Provis J L 2012 Cem. Concr. Comp. 34 25Neithalath N, Persun J and Hossain A 2009 Cem. Concr. Res. 39 473Pacheco-Torgal F, Castro-Gomes J and Jalali S 2008a Constr. Build. Mater. 22 1315Pacheco-Torgal F, Castro-Gomex J and Jalali S 2008b Constr. Build. Mater. 22 1201Pacheco-Torgal F, Castro-Gomex J and Jalali S 2008c Constr. Build. Mater. 22 2212Payá J, Borrachero M V, Monzó J, Soriano L and Tashima M M 2012 Mater. Lett. 74 223Puertas F, Martínez-Ramírez S, Alonso S and Vázquez T 2000 Cem. Concr. Res. 30 1625Puertas F, Barba A, Gazulla M F, Gómez M P, Palacios M and Martínez-Ramírez S 2006 Mater. Construc. 56 73Reig L, Tashima M M, Borrachero M V, Monzó J and Payá J 2010 II Simposio aprovechamiento de residuos agro-industriales como fuente sostenible de materiales de construcción p. 83Rodriguez E D, Bernal S A, Provis J, Payá J, Monzó J and Borrachero M V 2012 Cem. Concr. Comp. (submitted)Tashima M M, Borrachero M V, Monzó J, Soriano L and Payá J 2009 COMATCOMP09 p.421Tashima M M, Akasaki J L, Castaldelli V N, Soriano L, Monzó J, Payá J and Borrachero M V 2012 Mater. Lett. 80 50Xu H and van Deventer J S J 2000 Int. J. Miner. Process. 59 247Yao X, Zhang Z, Zhu H and Chen Y 2009 Thermochim. Acta 493 49Zivica V 2004 Bull. Mater. Sci. 27 179Zivica V, Balkovic S and Drabik M 2011 Constr. Build. Mater. 25 220

Scholarly publishing depends on peer reviewers

The peer-review crisis is posing a risk to the scholarly peer-reviewed journal system. Journals have to ask many potential peer reviewers to obtain a minimum acceptable number of peers accepting reviewing a manuscript. Several solutions have been suggested to overcome this shortage. From reimbursing for the job, to eliminating pre- publication reviews, one cannot predict which is more dangerous for the future of scholarly publishing. And, why not acknowledging their contribution to the final version of the article published? PubMed created two categories of contributors: authors [AU] and collaborators [IR]. Why not a third category for the peer-reviewer

An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability

© 2019 Elsevier Ltd. All rights reserved.The main aim of this review article was to address the performance of filament wound fibre reinforced polymer (FRP) composite pipes and their critical properties, such as burst, buckling, durability and corrosion. The importance of process parameters concerning merits and demerits of the manufacturing methods was discussed for the better-quality performance. Burst analysis revealed that the winding angle of ±55° was observed to be optimum with minimum failure mechanisms, such as matrix cracking, whitening, leakage and fracture. The reduction of buckling effect was reported in case of lower hoop stress value in the hoop to axial stress ratio against axial, compression and torsion. A significant improvement in energy absorption was observed in the hybrid composite pipes with the effect of thermal treatment. However, the varying winding angle in FRP pipe fabrication was reported as an influencing factor affecting all the aforementioned properties. Almost 90% of the reviewed studies was done using E-glass/epoxy materials for the composite pipe production. By overcoming associated limitations, such as replacing synthetic materials, designing new material combinations and cost-benefit analysis, the production cost of the lightweight FRP composite pipes can be decreased for the real-time applications.Peer reviewe

Mapping child growth failure across low- and middle-income countries

Childhood malnutrition is associated with high morbidity and mortality globally1. Undernourished children are more likely to experience cognitive, physical, and metabolic developmental impairments that can lead to later cardiovascular disease, reduced intellectual ability and school attainment, and reduced economic productivity in adulthood2. Child growth failure (CGF), expressed as stunting, wasting, and underweight in children under five years of age (0�59 months), is a specific subset of undernutrition characterized by insufficient height or weight against age-specific growth reference standards3�5. The prevalence of stunting, wasting, or underweight in children under five is the proportion of children with a height-for-age, weight-for-height, or weight-for-age z-score, respectively, that is more than two standard deviations below the World Health Organization�s median growth reference standards for a healthy population6. Subnational estimates of CGF report substantial heterogeneity within countries, but are available primarily at the first administrative level (for example, states or provinces)7; the uneven geographical distribution of CGF has motivated further calls for assessments that can match the local scale of many public health programmes8. Building from our previous work mapping CGF in Africa9, here we provide the first, to our knowledge, mapped high-spatial-resolution estimates of CGF indicators from 2000 to 2017 across 105 low- and middle-income countries (LMICs), where 99 of affected children live1, aggregated to policy-relevant first and second (for example, districts or counties) administrative-level units and national levels. Despite remarkable declines over the study period, many LMICs remain far from the ambitious World Health Organization Global Nutrition Targets to reduce stunting by 40 and wasting to less than 5 by 2025. Large disparities in prevalence and progress exist across and within countries; our maps identify high-prevalence areas even within nations otherwise succeeding in reducing overall CGF prevalence. By highlighting where the highest-need populations reside, these geospatial estimates can support policy-makers in planning interventions that are adapted locally and in efficiently directing resources towards reducing CGF and its health implications. © 2020, The Author(s)

Mapping 123 million neonatal, infant and child deaths between 2000 and 2017

Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations

Mapping child growth failure across low- and middle-income countries

Child growth failure (CGF), manifested as stunting, wasting, and underweight, is associated with high 5 mortality and increased risks of cognitive, physical, and metabolic impairments. Children in low- and middle-income countries (LMICs) face the highest levels of CGF globally. Here we illustrate national and subnational variation of under-5 CGF indicators across LMICs, providing 2000–2017 annual estimates mapped at a high spatial resolution and aggregated to policy-relevant administrative units and national levels. Despite remarkable declines over the study period, many LMICs remain far from the World Health 10 Organization’s ambitious Global Nutrition Targets to reduce stunting by 40% and wasting to less than 5% by 2025. Large disparities in prevalence and rates of progress exist across regions, countries, and within countries; our maps identify areas where high prevalence persists even within nations otherwise succeeding in reducing overall CGF prevalence. By highlighting where subnational disparities exist and the highest-need populations reside, these geospatial estimates can support policy-makers in planning locally 15 tailored interventions and efficient directing of resources to accelerate progress in reducing CGF and its health implications