1,919 research outputs found
Tabulation and summary of thermodynamic effects data for developed cavitation on ogive-nosed bodies
Thermodynamic effects data for developed cavitation on zero and quarter caliber ogives in Freon 113 and water are tabulated and summarized. These data include temperature depression (delta T), flow coefficient (C sub Q), and various geometrical characteristics of the cavity. For the delta T tests, the free-stream temperature varied from 35 C to 95 C in Freon 113 and from 60 C to 125 C in water for a velocity range of 19.5 m/sec to 36.6 m/sec. Two correlations of the delta T data by the entrainment method are presented. These correlations involve different combinations of the Nusselt, Reynolds, Froude, Weber, and Peclet numbers and dimensionless cavity length
Correlations by the entrainment theory of thermodynamic effects for developed cavitation in venturis and comparisons with ogive data
A semi-empirical entrainment theory was employed to correlate the measured temperature depression, Delta T, in a developed cavity for a venturi. This theory correlates Delta t in terms of the dimensionless numbers of Nusselt, Reynolds, Froude, Weber and Peclet, and dimensionless cavity length, L/D. These correlations are then compared with similar correlations for zero and quarter caliber ogives. In addition, cavitation number data for both limited and developed cavitation in venturis are presented
Tailored composite wings with elastically produced chordwise camber
Four structural concepts were created which produce chordwise camber deformation that results in enhanced lift. A wing box can be tailored to utilize each of these with composites. In attempting to optimize the aerodynamic benefits, researchers found that there are two optimum designs that are of interest. There is a weight optimum which corresponds to the maximum lift per unit structural weight. There is also a lift optimum that corresponds to maximum absolute lift. Experience indicates that a large weight penalty accompanies the transition from weight to lift optimum designs. New structural models, the basic deformation mechanisms that are utilized, and typical analytical results are presented. It appears that lift enhancements of sufficient magnitude can be produced to render this type of wing tailoring of practical interest
Incidence of splayleg pigs in Nebraska litter size selection lines
Genetic parameters for the splayleg (SL) condition were estimated from 37,673 records of pigs from six lines derived from a Large White–Landrace base population. Random selection for 22 generations was practiced in Lines C1 and C2. Line C2 was derived from C1 at Generation 8. Selection lines were as follows: 1) Line I, selected 11 generations for an index of ovulation rate and embryonic survival followed by 11 generations of selection for litter size; 2) Line IOL, derived from Line I at Generation 8 and which underwent eight generations of two-stage selection for ovulation rate and number of fully formed pigs per litter followed by four generations of litter size selection; 3) Line COL, derived from Line C1 at Generation 8 and selected eight generations in two stages for ovulation rate and number of fully formed pigs followed by four generations of litter size selection; and 4) Line T, selected 12 generations for increased testis size. From logistic models, it was found that boars were 224% more likely to have SL than gilts (P \u3c 0.01). Decreases in birth weight, dam age at puberty, dam nipple number, and dam embryonic survival, and increases in dam litter size and inbreeding increased the odds of SL (P \u3c 0.05). Direct and maternal heritabilities of SL were 0.07 and 0.16, respectively, and the correlation between direct and maternal effects was −0.24. Correlations between direct genetic effects for SL and number born alive, nipple number, birth weight, age at puberty, and embryonic survival were −0.19, −0.36, 0.23, −0.19, and −0.32, respectively. Except for the correlation of 0.32 between maternal effects for SL and direct effects for number of live pigs, correlations of SL maternal genetic effects with direct genetic effects of other traits were less than 0.11. Annual direct genetic trends (%) for SL in I, IOL, COL, T, C1, and C2 were −0.003 ± 0.003, 0.121 ± 0.012, −0.273 ± 0.009, 0.243 ± 0.014, −0.274 ± 0.004, and 0.086 ± 0.008, respectively; annual maternal genetic trends (%) were 0.106 ± 0.004, 0.508 ± 0.019, 0.383 ± 0.015, 0.527 ± 0.024, 0.188 ± 0.005, and 0.113 ± 0.012, respectively. Annual genetic maternal trend in Line I after Generation 12 was 0.339 ± 0.014. Maternal breeding value for SL is expected to increase as a correlated response to selection for increased litter size and increased size of testes
Improving the clinical value and utility of CGM systems: issues and recommendations : a joint statement of the European Association for the Study of Diabetes and the American Diabetes Association Diabetes Technology Working Group
The first systems for continuous glucose monitoring (CGM) became available over 15 years ago. Many then believed CGM would revolutionise the use of intensive insulin therapy in diabetes; however, progress towards that vision has been gradual. Although increasing, the proportion of individuals using CGM rather than conventional systems for self-monitoring of blood glucose on a daily basis is still low in most parts of the world. Barriers to uptake include cost, measurement reliability (particularly with earlier-generation systems), human factors issues, lack of a standardised format for displaying results and uncertainty on how best to use CGM data to make therapeutic decisions. This scientific statement makes recommendations for systemic improvements in clinical use and regulatory (pre- and postmarketing) handling of CGM devices. The aim is to improve safety and efficacy in order to support the advancement of the technology in achieving its potential to improve quality of life and health outcomes for more people with diabetes
Improving the clinical value and utility of CGM systems: issues and recommendations: a joint statement of the European Association for the Study of Diabetes and the American Diabetes Association Diabetes Technology Working Group
The first systems for continuous glucose monitoring (CGM) became available over 15 years ago. Many then believed CGM would revolutionize the use of intensive insulin therapy in diabetes; however, progress toward that vision has been gradual. Although increasing, the proportion of individuals using CGM rather than conventional systems for self-monitoring of blood glucose on a daily basis is still low in most parts of the world. Barriers to uptake include cost, measurement reliability (particularly with earlier-generation systems), human factors issues, lack of a standardized format for displaying results, and uncertainty on how best to use CGM data to make therapeutic decisions. This Scientific Statement makes recommendations for systemic improvements in clinical use and regulatory (pre- and postmarketing) handling of CGM devices. The aim is to improve safety and efficacy in order to support the advancement of the technology in achieving its potential to improve quality of life and health outcomes for more people with diabetes
Проект парогазовой ТЭЦ с противодавленческими турбинами
Дипломный проект 86страниц, 5рисунков, 10таблиц, 10 источников, 1 приложение, 7 листов графического материала,
ТЕПЛОВАЯ СХЕМА, ПАРОГАЗОВАЯ УСТАНОВКА, КОТЕЛ-УТИЛИЗАТОР, ПАРОВАЯ ТУРБИНА СХЕМА КИП и А.
Объектом исследования является парогазовый энергоблок.
Цель работы – проект парогазового энергоблока.
В процессе работы выполнен расчет тепловой схемы расчетный для проектирования отопления режим.
режим, проектирование котла-утилизатора, технико-экономические расчеты.
В результате выполнения работы показаны преимущества парогазового
энергоблока на базе высокотемпературной газотурбинной установки SGT-800, проект позволяет повысить КПД энергоблока в сравнении с традиционными паросиловыми установками.
Технико-экономические расчеты показали быструю окупаемость проекта и низкую себестоимость электроэнергии.
Пояснительная записка выполнена в текстовом редакторе Microsoft Of-
fice Word 2007, чертежи в графических редакторах Компас.Graduation project 86stranits, 5risunkov, 10tablits 10 sources 1 annex, 7 sheets of graphic material,
Thermal circuit, combined cycle gas turbine, heat recovery boiler, steam turbine and instrumentation A. SCHEME
The object of the research is combined-cycle unit.
Objective - combined cycle power project.
In the process, calculated the thermal circuit current mode for heating design.
mode, design recovery boiler, technical and economic calculations.
As a result of the work shows the benefits of combined cycle gas turbine
power on the basis of high-temperature gas turbine SGT-800 installation, the project improves the power efficiency compared to conventional steam power plants.
Technical and economic calculations have shown a rapid return on the project and the low cost of electricity.
The explanatory note is made in the text editor Microsoft Of-
fice Word 2007 drawing in the graphic editors Compass
The Midpoint Rule as a Variational--Symplectic Integrator. I. Hamiltonian Systems
Numerical algorithms based on variational and symplectic integrators exhibit
special features that make them promising candidates for application to general
relativity and other constrained Hamiltonian systems. This paper lays part of
the foundation for such applications. The midpoint rule for Hamilton's
equations is examined from the perspectives of variational and symplectic
integrators. It is shown that the midpoint rule preserves the symplectic form,
conserves Noether charges, and exhibits excellent long--term energy behavior.
The energy behavior is explained by the result, shown here, that the midpoint
rule exactly conserves a phase space function that is close to the Hamiltonian.
The presentation includes several examples.Comment: 11 pages, 8 figures, REVTe
- …