165 research outputs found
Integrating planar circuits with superconducting 3D microwave cavities using tunable low-loss couplers
We design and test a low-loss interface between superconducting 3-dimensional
microwave cavities and 2-dimensional circuits, where the coupling rate is
highly tunable. This interface seamlessly integrates a magnetic antenna and a
Josephson junction based coupling element with a cavity, and we demonstrate
that the introduced loss from this integration only limits the quality factor
to 4.5 million. The cavity external coupling rate can then be tuned from
negligibly small to over 3 orders of magnitude larger than the internal loss
rate with a characteristic time of 3.2 ns. This switching speed does not impose
additional limits on the coupling rate because it is much faster than the
coupling rate. Moreover, the coupler can be controlled by baseband signals to
avoid interference with microwave signals near the cavity or qubit frequencies.
Finally, the coupling element introduces a 0.04 Hz/photon self-Kerr
nonlinearity to the cavity, remaining linear in high photon number operations
Corrugated Silicon Platelet Feed Horn Array for CMB Polarimetry at 150 GHz
Next generation cosmic microwave background (CMB) polarization anisotropy
measurements will feature focal plane arrays with more than 600 millimeter-wave
detectors. We make use of high-resolution photolithography and wafer-scale etch
tools to build planar arrays of corrugated platelet feeds in silicon with
highly symmetric beams, low cross-polarization and low side lobes. A compact
Au-plated corrugated Si feed designed for 150 GHz operation exhibited
performance equivalent to that of electroformed feeds: ~-0.2 dB insertion loss,
<-20 dB return loss from 120 GHz to 170 GHz, <-25 dB side lobes and <-23 dB
cross-polarization. We are currently fabricating a 50 mm diameter array with 84
horns consisting of 33 Si platelets as a prototype for the SPTpol and ACTpol
telescopes. Our fabrication facilities permit arrays up to 150 mm in diameter.Comment: 12 pages; SPIE proceedings for Millimeter, Submillimeter, and
Far-Infrared Detectors and Instrumentation for Astronomy V (Conference 7741,
June 2010, San Diego, CA, USA
Photon-noise limited sensitivity in titanium nitride kinetic inductance detectors
We demonstrate photon-noise limited performance at sub-millimeter wavelengths
in feedhorn-coupled, microwave kinetic inductance detectors (MKIDs) made of a
TiN/Ti/TiN trilayer superconducting film, tuned to have a transition
temperature of 1.4~K. Micro-machining of the silicon-on-insulator wafer
backside creates a quarter-wavelength backshort optimized for efficient
coupling at 250~\micron. Using frequency read out and when viewing a variable
temperature blackbody source, we measure device noise consistent with photon
noise when the incident optical power is ~0.5~pW, corresponding to noise
equivalent powers ~3 W/. This
sensitivity makes these devices suitable for broadband photometric applications
at these wavelengths
Prototype finline-coupled TES bolometers for CLOVER
CLOVER is an experiment which aims to detect the signature of gravitational
waves from inflation by measuring the B-mode polarization of the cosmic
microwave background. CLOVER consists of three telescopes operating at 97, 150,
and 220 GHz. The 97-GHz telescope has 160 feedhorns in its focal plane while
the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a
hexagonal array and feed a polarimeter which uses finline-coupled TES
bolometers as detectors. To detect the two polarizations the 97-GHz telescope
has 320 detectors while the 150 and 220-GHz telescopes have 512 detectors each.
To achieve the target NEPs (1.5, 2.5, and 4.5x10^-17 W/rtHz) the detectors are
cooled to 100 mK for the 97 and 150-GHz polarimeters and 230 mK for the 220-GHz
polarimeter. Each detector is fabricated as a single chip to ensure a 100%
operational focal plane. The detectors are contained in linear modules made of
copper which form split-block waveguides. The detector modules contain 16 or 20
detectors each for compatibility with the hexagonal arrays of horns in the
telescopes' focal planes. Each detector module contains a time-division SQUID
multiplexer to read out the detectors. Further amplification of the multiplexed
signals is provided by SQUID series arrays. The first prototype detectors for
CLOVER operate with a bath temperature of 230 mK and are used to validate the
detector design as well as the polarimeter technology. We describe the design
of the CLOVER detectors, detector blocks, and readout, and present preliminary
measurements of the prototype detectors performance.Comment: 4 pages, 6 figures; to appear in the Proceedings of the 17th
International Symposium on Space Terahertz Technology, held 10-12 May 2006 in
Pari
Auxiliary Components for Kilopixel Transition Edge Sensor Arrays
We have fabricated transition edge sensor bolometer focal plane arrays sensitive to mm-submillimeter (0.1-3 THz) radiation for the Atacama Cosmology Telescope (ACT), which will probe the cosmic microwave background at 0.147,0.215, and 0.279 GHz. Central to the performance of these bolometers is a set of auxiliary resistive components. Here we discuss shunt resistors, which allow for tight optimization of bolometer time constant and sensitivity. Our shunt resistors consist of AuPd strips grown atop of interdigitated superconducting MoN, wires. We can tailor the shunt resistance by altering the dimensions of the AuPd strips and the pitch and width of the MoN, wires and can fabricate over 1000 shunts on a single 4" wafer. By modeling the resistance dependence of these parameters, a variety of different 0.77 +I-0.13 mOhm shunt resistors have been fabricated. This variety includes different shunts possessing MoN, wires with wire width equal to 1.5 and 10 microns and pitch equal to 4.5 and 26 microns, respectively. Our ability to set the resistance of the shunts hints at the scalability of our design. We have also integrated a Si02 capping layer into our shunt resistor fabrication scheme, which inhibits metal corrosion and eventual degradation of the shunt. Consequently, their robustness coupled with their high packing density makes these resistive components attractive for future kilopixel detector arrays
- …