Implementing Inkjet Printed Transparent Conductive Electrodes in Solution Processed Organic Electronics

Through the use of solution-based materials, the field of printed organic electronics has not only made new devices accessible, but also allows the process of manufacture to move toward a high throughput industrial scale. However, while solution-based active layer materials in these systems have been studied quite intensely, the printed electrodes and specifically the transparent conductive anode have only relatively recently been investigated. In this progress report, the use of metal nanoparticles within printed organic electronic devices is highlighted, specifically their use as replacement of the commonly used indium tin oxide transparent conductive electrode within organic photovoltaics (OPVs) and organic light emitting diodes (OLEDs). A cross fertilization between the applications is expected since an OPV device is essentially an inversely operated OLED. This report aims to highlight the use of inkjet-printed nanoparticles as cost-effective electrodes for printed optoelectronic applications and discusses methods to improve the conductive and interfacial properties. Finally, in an outlook, the use of these types of metal nanoparticle inks to manipulate light management properties, such as outcoupling, in the device is investigated

ITO free OLEDs utilizing inkjet printed and low temperature plasma sintered Ag electrodes

We report an inkjet printed indium tin oxide ITO free electrode made from a particle free silver ink. After printing, an argon plasma is used to reduce the silver ions in the ink to metallic silver. This process does not require high temperatures and is therefore suitable for use with temperature sensitive substrates. Printed silver layers show good optical transmittance and electrical conductivity. To demonstrate the capabilities of the electrodes, inverted ITO free organic light emitting diodes OLEDs were produced via solution processing. In terms of luminance and efficacy, the devices containing the printed electrodes show improved luminance and current efficacy compared to ITO based reference devices. When fabricated with flexible substrates, the printed OLEDs show high bending stability, enabling flexible application

A guide to qualitative haze measurements demonstrated on inkjet-printed silver electrodes for flexible OLEDs

The search for alternative transparent electrodes to the commonly used indium tin oxide (ITO) in optoelectronic devices has led to solution-based approaches based on inkjet printing. As an additive manufacturing technique that allows drops to be positioned only where necessary, inkjet printing shows reduced waste of starting material compared to other methods such as spin coating. As a result, functional materials can be both coated and structured without the need for masks or lithographic pre-patterning of the substrate. For this contribution, we utilized a particle-free silver ink to produce a transparent electrode by inkjet printing. After printing, the silver ions were reduced to metallic silver by an argon plasma. The process takes place at low temperatures (ca. 40 – 50°C), making it suitable for use with flexible substrates, which are often temperature-sensitive. The printed silver layers show good electrical conductivity and optical transmittance, with a crystalline grain structure being formed and maintained during the metallization process. This structure forms a self-organized nanometer-size grid, whose structure allows light to pass through. Due to its nano-structured property, the haze of the electrode was investigated using a simple experimental setup based on a light source shining through the electrode and analyzing the size of the projected pattern. Such qualitative assessment can be a useful indication of the quality of the electrode and we provide details on how to replicate this setup. The final electrodes were implemented in solution-processed OLEDs, which showed bright luminance and overall low haze compared to ITO-based reference devices.Peer Reviewe

Using Combinatorial Inkjet Printing for Synthesis and Deposition of Metal Halide Perovskites in Wavelength‐Selective Photodetectors

Metal halide perovskites have received great attention in recent years, predominantly due to the high performance of perovskite solar cells. The versatility of the material, which allows the tunability of the bandgap, has led to its use in light-emitting diodes, photo, and X-ray detectors, among other optoelectronic device applications. Specifically in photodetectors, the tunability of the bandgap allows fabrication of spectrally selective devices. Utilizing a combinatorial inkjet printing approach, multiple perovskite compositions absorbing at specific wavelengths in a single printing step are fabricated. The drop-on-demand capabilities of inkjet printing enable the deposition of inks in a precise ratio to produce specific perovskite compositions in the printed thin film. By controlling the halide ratio in the compositions, a mixed halide gradient ranging from pure MAPbI3 via MAPbBr3 to MAPbCl3 is produced. The tunability in the absorption onset from 410 to 790 nm is demonstrated, covering the whole visible spectrum, with a precision of 8 nm steps for MAPb(BrxCl1−x)3 compositions. From this range of mixed halide perovskites, photodetectors which show spectral selectivity corresponding to the measured absorption onset are demonstrated, paving the way for use in a printed visible light spectrometer without the need for a dispersion element.Peer Reviewe

One pot synthesis of a stable and cost effective silver particle free ink for inkjet printed flexible electronics

Silver particle free inks display immense superiority and potential over silver nanoparticle based inks in the aspect of synthesis, flexibility and low temperature processing, which has attracted considerable research interest as an alternative for fabricating conductive structures in recent years. Although recent research on silver particle free inks has led to beneficial results, there are still some drawbacks some of the inks are chemically unstable and hence are not suitable for industrial inkjet printing process, although they have good conductivity; while others are cheap in terms of raw material costs but are complicated to make due to the complex synthetic route or using hazardous procedures, or are not compatible with inkjet printing. Therefore, it will be advantageous to develop a stable, cheap and inkjet printable silver particle free ink using a simple synthetic procedure. Alcohols are favorable solvents for silver particle free inks that can provide the ink with essential fluid properties for inkjet printing. However, they have some negative effects on the ink performance due to their physicochemical properties, which should be avoided. In this work, a simple do it yourself silver particle free ink is presented, which shows high chemical stability, low cost and good printability. The ink is formulated via a simple silver oxalate precursor route in alcohols. The fluid property, thermal property, stability and electrical performance of the inks based on different alcohols were investigated and optimized to obtain the final ink for printing on glass and flexible polyimide substrates. The printed Ag features yielded a resistivity of 15.46 amp; 956; amp; 937; cm at a sintering temperature of 180 C, which is equivalent to 10 times bulk silver. Based on a comprehensive assessment, we can offer a low cost, easy to make, reliable and highly competitive ink for flexible printed electronic

Large area inkjet printed metal halide perovskite LEDs enabled by gas flow assisted drying and crystallization

We demonstrate the upscaling of inkjet printed metal halide perovskite light emitting diodes. To achieve this, the drying process, critical for controlling the crystallization of the perovskite layer, was optimized with an airblade like slit nozzle in a gas flow assisted vacuum drying step. This yields large, continuous perovskite layers in light emitting diodes with an active area up to 1600 mm

Finally, inkjet printed metal halide perovskite LEDs utilizing seed crystal templating of salty PEDOT PSS

Solution processable metal halide perovskites are increasingly implemented in perovskite based light emitting diodes PeLEDs . Especially green PeLEDs based on methylammonium lead bromide MAPbBr3 composites exhibit impressive optoelectronic properties, while allowing processing by low cost and upscalable printing methods. In this study, we have investigated the influence of potassium chloride KCl blended into the common hole injection material poly 3,4 ethylenedioxythiophene polystyrene sulfonate PEDOT PSS to boost PeLED device performance. The inclusion of KCl firstly results in a change in morphology of the PEDOT PSS layer, which then acts as a template during deposition of the perovskite layer. A MAPbBr3 polyethylene glycol PEG composite was used, which does not require the deposition of an anti solvent droplet to induce preferential perovskite crystallization and is therefore suitable for spin coating and scalable inkjet printing processes. PeLEDs utilizing the KCl induced templating effect on a planar PEDOT PSS MAPbBr3 PEG architecture show improved performance, predominantly due to improved crystallization. PeLEDs incorporating spin coated perovskite layers yield a 40 fold increase in luminance 8000 cd m 2 while the turn on voltage decreases to 2.5 V. KCl modified PEDOT PSS contact layers enabled the realization of inkjet printed PeLEDs with luminance increased by a factor of 20 at a maximum of 4000 cd m 2 and a turn on voltage of 2.5 V. This work paves the way for inkjet printed perovskite light emitting devices for a wide variety of low cost and customizable application

Up scalable ITO free organic light emitting diodes based on embedded inkjet printed copper grids

We report on ITO-free OLEDS with a transparent hybrid Cu nanoparticle grid/PEDOT:PSS electrode processed in ambient conditions. An experimentally based methodology was implemented, where studies on alternative PEDOT:PSS derivatives and Cu grid design were performed, to gradually increase the efficiency of lab scale ITO-free OLEDs. To further increase electrode performance, inkjet-printed (IJP) Cu-grids are embedded to flatten the electrode, reduce leakage current and enhance homogeneity and efficiency. Finally, embedded Cu based ITO-free OLEDs showed current and power efficiencies comparable to reference ITO-based OLEDs. Methods to manufacture large area flat embedded IJP Cu-electrodes on glass and flexible substrates are presented and upscaling prospects of the proposed ITO-free electrode are discussed