1,133 research outputs found
Injector for bipropellant rocket engines Patent
Injector manifold assembly for bipropellant rocket engines providing for fuel propellant to serve as coolan
An observation on tone cut-off in static test data from jet engine fans
The far-field acoustic data for eight full-scale fans tested at a NASA-Lewis outdoor facility were analyzed for the effect of a cut-off design feature where the number of rotor and stator blades are proportioned so that the blade-passage tone will not propagate. Inlet flow distortions, prevalent during static testing, interact with the rotor to generate tones that generally mask this cut-off phenomenon. Distortion tone properties previously evaluated are used to analyze the tones propagating from the aft fan duct. The analyzed data clearly differentiated the fans that are and are not cut-off
Noise comparisons of single and two stage demonstrator fans for advanced technology aircraft
A high-speed single-stage and a low-speed two-stage fan were designed, fabricated, and tested to demonstrate their predicted low noise performance for an advanced 0.85-0.90 cruise Mach number aircraft requiring a 1.8-1.9 pressure ratio fan. Acoustic tests were made with both unsuppressed and suppressed configurations. The two-stage fan demonstrated that quiet fan technology developed for low-speed single-stage fan is applicable to two-stage designs. The unsuppressed high-speed single-stage fan demonstrated that significant reductions in inlet noise can be achieved from the sonic blockage caused by supersonic flow in the rotor blading. Both fans demonstrated suppressed inlet noise levels with treated sonic inlets that met advanced technology goals
Burning rate control of solid propellants Patent
Pressurized gas injection for burning rate control of solid propellant
Control of transverse instability in rocket combustors Patent
Rocket combustion chamber stability by controlling transverse instability during propellant combustio
Flight-Effects on Predicted Fan Fly-By Noise
The impact on PNLT (Perceived Noise Level, Tone corrected) and Fly-by EPNL (Effective Perceived Noise Level) when forward motion reduces the noise generated by the bypass fan of an aircraft engine was studied. Calculated noise spectra for a typical subsonic tip speed fan designed for blade passage frequency (BPF) tone cutoff were translated in frequency by systematically varying the BPF from 0.5 to 8 kHz. Two cases of predicted flight-effects on fan source noises were considered: reduced BPF tone level of 8 db and reduced broadband noise level of about 2 db in addition to reduced tone level. The maximum reduction in PNLT of the noise as emitted from the fan occurred when the BPF was at 4 kHz where the reductions were 7.4 and 10.0 db. The maximum reduction in EPNL of the noise as received during a 500-foot altitude fly-by occurred when the BPF was at 2.5 kHz where the reductions were 5.0 and 7.8 db
Analysis of radiation patterns of interaction tones generated by inlet rods in the JT15D engine
Interaction tones were intentionally generated by circumferential arrays of equally spaced rods that protrude radially from the inlet wall near the face of the 28-blade fan. Arrays of 28 and 41 rods, selected to give specific far field radiation properties, were tested. The expected properties were readily apparent in the measured radiation patterns. A more detailed analysis of the test data showed both the precision and limitations of the applied acoustic theory. Rods protruding 23 percent of the radius predominantly generated only lowest radial order modes, as expected. Measured and predicted radiation patterns were generally in good agreement. The agreement, however, depended on a significant degree of implied refraction due to inlet velocity gradients. Refraction, if present, would impact static-flight noise comparisons
Effects of Simulated Flight on Fan Noise Suppression
Attenuation properties of three treated fan inlets were evaluated. Tunnel flow simulated the inflow clean-up effect on source noise observed in flight and allowed observation of the blade passage frequency tone cut-off phenomenon. Acoustic data consisted of isolated inlet noise measured in the far field at two fixed positions and with traverses at four frequencies. Attenuation and source noise properties with and without flight simulation are compared and discussed. Averaged attenuation properties showed relative agreement of the inlets with their design intent, however, tunnel flow significantly affected the attenuation spectra
Evaluation of tangential velocity effects on spinning transverse combustion instability
Tangential velocity effects on spinning transverse combustion instabilit
Optical phase-space reconstruction of mirror position at the attometer level
We describe an experiment in which the quadratures of the position of an
harmonically-bound mirror are observed at the attometer level. We have studied
the Brownian motion of the mirror, both in the free regime and in the
cold-damped regime when an external viscous force is applied by radiation
pressure. We have also studied the thermal-noise squeezing when the external
force is parametrically modulated. We have observed both the 50% theoretical
limit of squeezing at low gain and the parametric oscillation of the mirror for
a large gain.Comment: 10 pages, 11 figure
- …