Elastic strain associated with irradiation-induced defects in self-ion irradiated tungsten

Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reveals different dislocation loop structures as a function of sample thickness, suggesting that free surfaces limit the formation of extended defect structures that are found in thicker samples. HR-TKD strain analysis shows the formation of crystallographically-orientated long-range strain fluctuations above 0.01 dpa and a decrease of total elastic energy above 0.1 dpa

Research on the structure of a new type of multi party bicycle system

at present, many people’s gathering bicycles suitable for scenic spots, parks and pedestrian streets are popular abroad, but they have not been introduced in China. Based on the analysis of foreign multi person bicycles, this paper improves the suspension device, steering device, transmission device, braking device and parking device of bicycle vehicles, so as to improve the ability of multi person gathering bicycles to adapt to diff erent road conditions and the safety, reliability and comfort in the process of riding. The research results are expected to provide reference for the development of multi-party bicycles in China

Thermal diffusivity recovery and defect annealing kinetics of self-ion implanted tungsten prob e d by insitu transient grating spectroscopy

Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study, thermal diffusivity degradation in ion-implanted tungsten and its evolution from room temperature (RT) to 1073 K is considered. Five samples were exposed to 20 MeV self-ions at RT to achieve damage levels ranging from 3.2 x 10(-4) to 3.2 displacements per atom (dpa). Transient grating spectroscopy with insitu heating was then used to study thermal diffusivity evolution as a function of temperature. Using a kinetic theory model, an equivalent point defect density is estimated from the measured thermal diffusivity. The results showed a prominent recovery of thermal diffusivity between 450 K and 650 K, which coincides with the onset of mono-vacancy mobility. After 1073 K annealing samples with initial damage of 3.2 x 10(-3) dpa or less recover close to the pristine value of thermal diffusivity. For doses of 3.2 x 10(-2) dpa or higher, on the other hand, a residual reduction in thermal diffusivity remains even after 1073 K annealing. Transmission electron microscopy reveals that this is associated with extended, irradiation-induced dislocation structures that are retained after annealing. A sensitivity analysis shows that thermal diffusivity provides an efficient tool for assessing total defect content in tungsten up to 10 0 0 K. (c) 2022 The Author(s). Published by Elsevier Ltd on behalf of Acta Materialia Inc.Peer reviewe

Nano-scale corrosion mechanism of T91 steel in static lead-bismuth eutectic: a combined APT, EBSD, and STEM investigation

T91 steel is a candidate material for structural components in lead-bismuth-eutectic (LBE) cooled systems, for example fast reactors and solar power plants [1]. However, the corrosion mechanisms of T91 in LBE remain poorly understood. In this study, we have analysed the static corrosion of T91 in liquid LBE using a range of characterisation techniques at increasingly smaller scales. A unique pattern of liquid metal intrusion was observed that does not appear to correlate with the grain boundary network. Upon closer inspection, electron backscatter diffraction (EBSD) reveals a change in the morphology of grains at the LBE-exposed surface, suggesting a local phase transition. Energy dispersive X-ray (EDX) maps show that Cr is depleted in the T91 material near the LBE interface. Furthermore, we observed the dissolution of all Cr-enriched precipitates in this region. Although the corrosion is conducted in an oxygen deficient environment, both scanning transmission electron microscopy (STEM) and atom probe tomography (APT) reveal a thin surface oxide layer (presumably wüstite) at the LBE-steel interface. Using electron energy loss spectroscopy (EELS) in the STEM, as well as APT, the atomic scale elemental redistribution and 3D morphology of the corrosion interface is investigated. By combining results from these different techniques, several types of oxide phases and structures can be identified. Based on this detailed nano-scale information, we propose potential mechanisms of T91 corrosion in LBE

Origin of age softening in the refractory high-entropy alloys

Refractory high-entropy alloys (RHEAs) are emerging materials with potential for use under extreme conditions. As a newly developed material system, a comprehensive understanding of their long-term stability under potential service temperatures remains to be established. This study examined a titanium-vanadium-niobium-tantalum alloy, a promising RHEA known for its superior high-temperature strength and room-temperature ductility. Using a combination of advanced analytical microscopies, Calculation of Phase Diagrams (CALPHAD) software, and nanoindentation, we investigated the evolution of its microstructure and mechanical properties upon aging at 700°C. Trace interstitials such as oxygen and nitrogen, initially contributing to solid solution strengthening, promote phase segregation during thermal aging. As a result of the depletion of solute interstitials within the metal matrix, a progressive softening is observed in the alloy as a function of aging time. This study, therefore, underscores the need for a better control of impurities in future development and application of RHEAs

Microstructural and material property changes in severely deformed Eurofer-97

Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT, the average grain size reduced by a factor of $\sim$ 30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K - 800 K. Irradiation with 20 MeV Fe-ions to $\sim$ 0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation did not have a significant effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. These results provide a multi-faceted understanding of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.Comment: 59 pages, 19 figure

Refinements for Bragg coherent X-ray diffraction imaging: electron backscatter diffraction alignment and strain field computation

Bragg coherent X-ray diffraction imaging (BCDI) allows the 3D measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typically attained via estimates based on crystal geometry or synchrotron microbeam Laue diffraction measurements. Presented here is an alternative method to determine the crystal orientation for BCDI measurements using electron backscatter diffraction (EBSD) to align Fe–Ni and Co–Fe alloy microcrystals on three different substrates. The orientation matrix is calculated from EBSD Euler angles and compared with the orientation determined using microbeam Laue diffraction. The average angular mismatch between the orientation matrices is less than ∼6°, which is reasonable for the search for Bragg reflections. The use of an orientation matrix derived from EBSD is demonstrated to align and measure five reflections for a single Fe–Ni microcrystal via multi-reflection BCDI. Using this data set, a refined strain field computation based on the gradient of the complex exponential of the phase is developed. This approach is shown to increase accuracy, especially in the presence of dislocations. The results demonstrate the feasibility of using EBSD to pre-align BCDI samples and the application of more efficient approaches to determine the full lattice strain tensor with greater accuracy

Elastic Strain Associated with Irradiation-Induced Defects in Self-ion Irradiated Tungsten

Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reveals different dislocation loop structures as a function of sample thickness, suggesting that free surfaces limit the formation of extended defect structures that are found in thicker samples. HR-TKD strain analysis shows the formation of crystallographically-orientated long-range strain fluctuation above 0.01 dpa and a decrease of total elastic energy above 0.1 dpa

Data for oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells

All raw data used in the publication of Oxide-Nitride Nanolayer Stacks for Enhanced Passivation of p-Type Surfaces in Silicon Solar Cell

Analysing neutron radiation damage in YBa2Cu3O7–x high-temperature superconductor tapes

Superconducting windings will be necessary in future fusion reactors to generate the strong magnetic fields needed to confine the plasma, and these superconducting materials will inevitably be exposed to neutron damage. It is known that this exposure results in the creation of isolated damage cascades, but the presence of these defects alone is not sufficient to explain the degradation of macroscopic superconducting properties and a quantitative method is needed to assess the subtle lattice damage in between the clusters. We have studied REBCO-coated conductors irradiated with neutrons to a cumulative dose of 3.3 × 1022 n/m2 that show a degradation of both Tc and Jc values, and use HRTEM analysis to show that this irradiation introduces ∼10 nm amorphous collision cascades. In addition, we introduce a new method for the analysis of these images to quantify the degree of lattice disorder in the apparently perfect matrix between these cascades. This method utilises Fast Fourier and Discrete Cosine Transformations of a statistically relevant number of HRTEM images of pristine, neutron-irradiated and amorphous samples and extracts the degree of randomness in terms of entropy values. Our results show that these entropy values in both mid-frequency band FFT and DCT domains correlate with the expected level of lattice damage, with the pristine samples having the lowest and the fully amorphous regions the highest entropy values. Our methodology allows us to quantify ‘invisible’ lattice damage to and correlate these values to the degradation of superconducting properties, and also has relevance for a wider range of applications in the field of electron microscopy where small changes in lattice perfection need to be measured