Novel Therapeutic Strategies for Malignant Salivary Gland Tumors: Lessons Learned from Breast Cancer

Malignant salivary gland tumors (MSGTs) account for 2–6% of all head and neck cancers. Despite the rarity, MSGTs have been of great interest due to a wide variety of pathological features and high metastasis rates resulting in poor prognosis. Surgical resection followed by radiation therapy represents the main treatment of this malignancy. Adjuvant therapy is reserved for the management of local recurrence, no longer amenable to additional local therapy, and for metastasis. Based on the studies from other types of tumors, particularly breast cancer, the expression and function of sex steroid hormone receptors in cancer have been extensively studied and applied to diagnosis and treatment. Although a number of studies in MSGTs have been published, the rationale for hormone therapy is still controversial due to the disparate results and insufficient number of cases. However, some recent reports have demonstrated that certain salivary gland neoplasms are similar to breast cancer, not only in terms of the pathological features, but also at the molecular level. Here, we shed light on the biological similarity between MSGTs and certain types of breast cancer, and describe the potential use of hormone and additional therapies for MSGTs

Electroreflectance spectroscopy in self-assembled quantum dots: lens symmetry

Modulated electroreflectance spectroscopy $\Delta R/R$ of semiconductor self-assembled quantum dots is investigated. The structure is modeled as dots with lens shape geometry and circular cross section. A microscopic description of the electroreflectance spectrum and optical response in terms of an external electric field (${\bf F}$) and lens geometry have been considered. The field and lens symmetry dependence of all experimental parameters involved in the $\Delta R/R$ spectrum have been considered. Using the effective mass formalism the energies and the electronic states as a function of ${\bf F}$ and dot parameters are calculated. Also, in the framework of the strongly confined regime general expressions for the excitonic binding energies are reported. Optical selection rules are derived in the cases of the light wave vector perpendicular and parallel to $$. Detailed calculation of the Seraphin coefficients and electroreflectance spectrum are performed for the InAs and CdSe nanostructures. Calculations show good agreement with measurements recently performed on CdSe/ZnSe when statistical distribution on size is considered, explaining the main observed characteristic in the electroreflectance spectra

Exchange Anisotropy in Epitaxial and Polycrystalline NiO/NiFe Bilayers

(001) oriented NiO/NiFe bilayers were grown on single crystal MgO (001) substrates by ion beam sputtering in order to determine the effect that the crystalline orientation of the NiO antiferromagnetic layer has on the magnetization curve of the NiFe ferromagnetic layer. Simple models predict no exchange anisotropy for the (001)-oriented surface, which in its bulk termination is magnetically compensated. Nonetheless exchange anisotropy is present in the epitaxial films, although it is approximately half as large as in polycrystalline films that were grown simultaneously. Experiments show that differences in exchange field and coercivity between polycrystalline and epitaxial NiFe/NiO bilayers couples arise due to variations in induced surface anisotropy and not from differences in the degree of compensation of the terminating NiO plane. Implications of these observations for models of induced exchange anisotropy in NiO/NiFe bilayer couples will be discussed.Comment: 23 pages in RevTex format, submitted to Phys Rev B

First application of mass measurement with the Rare-RI Ring reveals the solar r-process abundance trend at A=122 and A=123

The Rare-RI Ring (R3) is a recently commissioned cyclotron-like storage ring mass spectrometer dedicated to mass measurements of exotic nuclei far from stability at Radioactive Isotope Beam Factory (RIBF) in RIKEN. The first application of mass measurement using the R3 mass spectrometer at RIBF is reported. Rare isotopes produced at RIBF, $^{127}$Sn, $^{126}$In, $^{125}$Cd, $^{124}$Ag, $^{123}$Pd, were injected in R3. Masses of $^{126}$In, $^{125}$Cd, and $^{123}$Pd were measured whereby the mass uncertainty of $^{123}$Pd was improved. This is the first reported measurement with a new storage ring mass spectrometery technique realized at a heavy-ion cyclotron and employing individual injection of the pre-identified rare nuclei. The latter is essential for the future mass measurements of the rarest isotopes produced at RIBF. The impact of the new $^{123}$Pd result on the solar $r$-process abundances in a neutron star merger event is investigated by performing reaction network calculations of 20 trajectories with varying electron fraction $Y_e$. It is found that the neutron capture cross section on $^{123}$Pd increases by a factor of 2.2 and $\beta$-delayed neutron emission probability, $P_\mathrm{1n}$, of $^{123}$Rh increases by 14\%. The neutron capture cross section on $^{122}$Pd decreases by a factor of 2.6 leading to pileup of material at $A=122$, thus reproducing the trend of the solar $r$-process abundances. The trend of the two-neutron separation energies (S$_\mathrm{2n}$) was investigated for the Pd isotopic chain. The new mass measurement with improved uncertainty excludes large changes of the S$_\mathrm{2n}$ value at $N=77$. Such large increase of the S$_\mathrm{2n}$ values before $N=82$ was proposed as an alternative to the quenching of the $N=82$ shell gap to reproduce $r$-process abundances in the mass region of $A=112-124$

Detection of occult carcinomatous diffusion in lymph nodes from head and neck squamous cell carcinoma using real-time RT–PCR detection of cytokeratin 19 mRNA

The aim of the present study was to evaluate the occult lymph node carcinomatous diffusion in head and neck squamous cell carcinoma (HNSCC). A total of 1328 lymph nodes from 31 patients treated between 2004 and 2005 were prospectively evaluated by routine haematoxylin–eosin–safran (HES) staining, immunohistochemistry (IHC) and real-time Taqman reverse–transcriptase polymerase chain reaction (real-time RT–PCR) assay. Amplification of cytokeratin 19 (CK19) mRNA transcripts using real-time RT–PCR was used to quantify cervical micrometastatic burden. The cervical lymph node metastatic rates determined by routine HES staining and real-time RT–PCR assay were 16.3 and 36.0%, respectively (P<0.0001). A potential change in the nodal status was observed in 13 (42.0%) of the 31 patients and an atypical pattern of lymphatic spread was identified in four patients (12.9%). Moreover, CK19 mRNA expression values in histologically positive lymph nodes were significantly higher than those observed in histologically negative lymph nodes (P<0.0001). These results indicate that real-time RT–PCR assay for the detection of CK19 mRNA is a sensitive and reliable method for the detection of carcinomatous cells in lymph nodes. This type of method could be used to reassess lymph node status according to occult lymphatic spread in patients with HNSCC

Lanthanum tungstate membranes for H-2 extraction and CO2 utilization: Fabrication strategies based on sequential tape casting and plasma-spray physical vapor deposition

[EN] In the context of energy conversion efficiency and decreasing greenhouse gas emissions from power generation and energy-intensive industries, membrane technologies for H-2 extraction and CO2 capture and utilization become pronouncedly important. Mixed protonic-electronic conducting ceramic membranes are hence attractive for the pre-combustion integrated gasification combined cycle, specifically in the water gas shift and H-2 separation process, and also for designing catalytic membrane reactors. This work presents the fabrication, microstructure and functional properties of Lanthanum tungstates (La28-xW4+xO54+delta, LaWO) asymmetric membranes supported on porous ceramic and porous metallic substrates fabricated by means of the sequential tape casting route and plasma spray-physical vapor deposition (PS-PVD). Pure LaWO and W site substituted LaWO were employed as membrane materials due to the promising combination of properties: appreciable mixed protonic-electronic conductivity at intermediate temperatures and reducing atmospheres, good sinterability and noticeable chemical stability under harsh operating conditions. As substrate materials porous LaWO (non-substituted), MgO and Crofer22APU stainless steel were used to support various LaWO membrane layers. The effect of fabrication parameters and material combinations on the assemblies' microstructure, LaWO phase formation and gas tightness of the functional layers was explored along with the related fabrication challenges for shaping LaWO layers with sufficient quality for further practical application. The two different fabrication strategies used in the present work allow for preparing all-ceramic and ceramic-metallic assemblies with LaWO membrane layers with thicknesses between 25 and 60 mu m and H-2 flux of ca. 0.4 ml/min cm(2) measured at 825 degrees C in 50 vol% H-2 in He dry feed and humid Ar sweep configuration. Such a performance is an exceptional achievement for the LaWO based H-2 separation membranes and it is well comparable with the H-2 flux reported for other newly developed dual phase cer-cer and cer-met membranes.ProtOMem Project under the BMBF grant 03SF0537 is gratefully acknowledged. Furthermore, the authors thank Ralf Laufs for his assistance in operating the PS-PVD facility. Dr. A. Schwedt from the Central Facility for Electron Microscopy (Gemeinschaftslabor fur Elektronenmikroskopie GFE), RWTH Aachen University is acknowledged for performing the EBSD analysis on the PS-PVD samples.Ivanova, ME.; Deibert, W.; Marcano, D.; Escolástico Rozalén, S.; Mauer, G.; Meulenberg, WA.; Bram, M.... (2019). Lanthanum tungstate membranes for H-2 extraction and CO2 utilization: Fabrication strategies based on sequential tape casting and plasma-spray physical vapor deposition. Separation and Purification Technology. 219:100-112. https://doi.org/10.1016/j.seppur.2019.03.015S100112219A.A. Evers, The hydrogen society, More than just a vision? ISBN 978-3-937863-31-3, Hydrogeit Verlag, 16727 Oberkraemer, Germany, 2010.Deibert, W., Ivanova, M. E., Baumann, S., Guillon, O., & Meulenberg, W. A. (2017). Ion-conducting ceramic membrane reactors for high-temperature applications. Journal of Membrane Science, 543, 79-97. doi:10.1016/j.memsci.2017.08.016Arun C. Bose, Inorganic membranes for energy and environmental applications, Edt. A. C. Bose, ISBN: 978-0-387-34524-6, Springer Science+Business Media, LLC, 2009.M. Marrony, H. Matsumoto, N. Fukatsu, M. Stoukides, Typical applications of proton ceramic cells: a way to market? in: M. Marrony (ed.), Proton-conducting ceramics. From fundamentals to applied research, by Pan Stanford Publishing Pte. Ltd., ISBN 978-981-4613-84-2, 2016.Di Giorgio, P., & Desideri, U. (2016). Potential of Reversible Solid Oxide Cells as Electricity Storage System. Energies, 9(8), 662. doi:10.3390/en9080662A.L. Dicks, D.A.J. Rand, Fuel cell systems explained, ISBN: 9781118613528, John Wiley & Sons Ltd., 2018.Zheng, Y., Wang, J., Yu, B., Zhang, W., Chen, J., Qiao, J., & Zhang, J. (2017). A review of high temperature co-electrolysis of H2O and CO2to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology. Chemical Society Reviews, 46(5), 1427-1463. doi:10.1039/c6cs00403bGötz, M., Lefebvre, J., Mörs, F., McDaniel Koch, A., Graf, F., Bajohr, S., … Kolb, T. (2016). Renewable Power-to-Gas: A technological and economic review. Renewable Energy, 85, 1371-1390. doi:10.1016/j.renene.2015.07.066Woodhead publishing series in energy, Nr. 76, Membrane reactors for energy applications and basic chemical production, Edt. A. Basile, L. Di Paola, F.I. Hai, V. Piemonte, by Elsevier Ltd, ISBN 978-1-78242-223-5, 2015.Morejudo, S. H., Zanón, R., Escolástico, S., Yuste-Tirados, I., Malerød-Fjeld, H., Vestre, P. K., … Kjølseth, C. (2016). Direct conversion of methane to aromatics in a catalytic co-ionic membrane reactor. Science, 353(6299), 563-566. doi:10.1126/science.aag0274Malerød-Fjeld, H., Clark, D., Yuste-Tirados, I., Zanón, R., Catalán-Martinez, D., Beeaff, D., … Kjølseth, C. (2017). Thermo-electrochemical production of compressed hydrogen from methane with near-zero energy loss. Nature Energy, 2(12), 923-931. doi:10.1038/s41560-017-0029-4J. Franz, Energetic and economic analysis of CO2 retention in coal gasification power plants by means of polymer and ceramic membranes (dissertation, German), Ruhr-University Bochum, Germany, Shaker Verlag, 2013.Franz, J., & Scherer, V. (2011). Impact of ceramic membranes for CO2 separation on IGCC power plant performance. Energy Procedia, 4, 645-652. doi:10.1016/j.egypro.2011.01.100E. Forster, dissertation, Thermal stability of ceramic membranes and catalysts for H2-separation in CO-shift reactors, Energy and Environment Band, vol. 284, ISBN 978-3-95806-084-5, RUB 2015.Escolástico, S., Stournari, V., Malzbender, J., Haas-Santo, K., Dittmeyer, R., & Serra, J. M. (2018). Chemical stability in H2S and creep characterization of the mixed protonic conductor Nd5.5WO11.25-δ. International Journal of Hydrogen Energy, 43(17), 8342-8354. doi:10.1016/j.ijhydene.2018.03.060Mortalò, C., Rebollo, E., Escolástico, S., Deambrosis, S., Haas-Santo, K., Rancan, M., … Fabrizio, M. (2018). Enhanced sulfur tolerance of BaCe0.65Zr0.20Y0.15O3-δ-Ce0.85Gd0.15O2-δ composite for hydrogen separation membranes. Journal of Membrane Science, 564, 123-132. doi:10.1016/j.memsci.2018.07.015Matsumoto, H., Shimura, T., Higuchi, T., Tanaka, H., Katahira, K., Otake, T., … Mizusaki, J. (2005). Protonic-Electronic Mixed Conduction and Hydrogen Permeation in BaCe[sub 0.9−x]Y[sub 0.1]Ru[sub x]O[sub 3−α]. Journal of The Electrochemical Society, 152(3), A488. doi:10.1149/1.1852442Cai, M., Liu, S., Efimov, K., Caro, J., Feldhoff, A., & Wang, H. (2009). Preparation and hydrogen permeation of BaCe0.95Nd0.05O3−δ membranes. Journal of Membrane Science, 343(1-2), 90-96. doi:10.1016/j.memsci.2009.07.011U. Balachandran, J. Guan, S.E. Dorris, A.C. Bose, G.J. Stiegel, in: Proceedings of the 5th ICIM, A-410, Nagoya, Japan, 1998.Qi, X. (2000). Electrical conduction and hydrogen permeation through mixed proton–electron conducting strontium cerate membranes. Solid State Ionics, 130(1-2), 149-156. doi:10.1016/s0167-2738(00)00281-2Zhan, S., Zhu, X., Ji, B., Wang, W., Zhang, X., Wang, J., … Lin, L. (2009). Preparation and hydrogen permeation of SrCe0.95Y0.05O3−δ asymmetrical membranes. Journal of Membrane Science, 340(1-2), 241-248. doi:10.1016/j.memsci.2009.05.037Song, S. (2004). Hydrogen permeability of SrCe1−xMxO3−δ (x=0.05, M=Eu, Sm). Solid State Ionics, 167(1-2), 99-105. doi:10.1016/j.ssi.2003.12.010Wei, X., Kniep, J., & Lin, Y. S. (2009). Hydrogen permeation through terbium doped strontium cerate membranes enabled by presence of reducing gas in the downstream. Journal of Membrane Science, 345(1-2), 201-206. doi:10.1016/j.memsci.2009.08.041CHENG, S., GUPTA, V., & LIN, J. (2005). Synthesis and hydrogen permeation properties of asymmetric proton-conducting ceramic membranes. Solid State Ionics, 176(35-36), 2653-2662. doi:10.1016/j.ssi.2005.07.005Kniep, J., & Lin, Y. S. (2010). Effect of Zirconium Doping on Hydrogen Permeation through Strontium Cerate Membranes. Industrial & Engineering Chemistry Research, 49(6), 2768-2774. doi:10.1021/ie9015182LIANG, J., MAO, L., LI, L., & YUAN, W. (2010). Protonic and Electronic Conductivities and Hydrogen Permeation of SrCe0.95-xZrxTm0.05O3-δ(0≤x≤0.40) Membrane. Chinese Journal of Chemical Engineering, 18(3), 506-510. doi:10.1016/s1004-9541(10)60250-9Xing, W., Inge Dahl, P., Valland Roaas, L., Fontaine, M.-L., Larring, Y., Henriksen, P. P., & Bredesen, R. (2015). Hydrogen permeability of SrCe0.7Zr0.25Ln0.05O3− membranes (Ln=Tm and Yb). Journal of Membrane Science, 473, 327-332. doi:10.1016/j.memsci.2014.09.027Oh, T., Yoon, H., Li, J., & Wachsman, E. D. (2009). Hydrogen permeation through thin supported SrZr0.2Ce0.8−xEuxO3−δ membranes. Journal of Membrane Science, 345(1-2), 1-4. doi:10.1016/j.memsci.2009.08.031Hamakawa, S. (2002). Synthesis and hydrogen permeation properties of membranes based on dense SrCe0.95Yb0.05O3−α thin films. Solid State Ionics, 148(1-2), 71-81. doi:10.1016/s0167-2738(02)00047-4Escolástico, S., Ivanova, M., Solís, C., Roitsch, S., Meulenberg, W. A., & Serra, J. M. (2012). Improvement of transport properties and hydrogen permeation of chemically-stable proton-conducting oxides based on the system BaZr1-x-yYxMyO3-δ. RSC Advances, 2(11), 4932. doi:10.1039/c2ra20214jH. Matsumoto, T. Shimura, T. Higuchi, T. Otake, Y. Sasaki, K. Yashiro, A. Kaimai, T. Kawada, J. Mizusaki, Mixed protonic-electronic conduction properties of SrZr0.9−xY0.1RuxO3−δ, Electrochemistry, 72(12), 861–864.M.E. Ivanova, S. Escolático, M. Balaguer, J. Palisaitis, Y.J. Sohn, W.A. Meulenberg, O. Guillon, J. Mayer, J.M. Serra, Hydrogen separation through tailored dual phase membranes with nominal composition BaCe0.8Eu0.2O3−δ:Ce0.8Y0.2O2−δ at intermediate temperatures, Sci. Rep. 6 (2016) 34773–34787.S. Elangovan, B.G. Nair, T.A. Small, Ceramic mixed protonic-electronic conducting membranes for hydrogen separation (2007), US 7,258,820 B2, 1997.Rosensteel, W. A., Ricote, S., & Sullivan, N. P. (2016). Hydrogen permeation through dense BaCe 0.8 Y 0.2 O 3−δ – Ce 0.8 Y 0.2 O 2−δ composite-ceramic hydrogen separation membranes. International Journal of Hydrogen Energy, 41(4), 2598-2606. doi:10.1016/j.ijhydene.2015.11.053Rebollo, E., Mortalò, C., Escolástico, S., Boldrini, S., Barison, S., Serra, J. M., & Fabrizio, M. (2015). Exceptional hydrogen permeation of all-ceramic composite robust membranes based on BaCe0.65Zr0.20Y0.15O3−δ and Y- or Gd-doped ceria. Energy & Environmental Science, 8(12), 3675-3686. doi:10.1039/c5ee01793aMontaleone, D., Mercadelli, E., Escolástico, S., Gondolini, A., Serra, J. M., & Sanson, A. (2018). All-ceramic asymmetric membranes with superior hydrogen permeation. Journal of Materials Chemistry A, 6(32), 15718-15727. doi:10.1039/c8ta04764bKim, H., Kim, B., Lee, J., Ahn, K., Kim, H.-R., Yoon, K. J., … Lee, J.-H. (2014). Microstructural adjustment of Ni–BaCe0.9Y0.1O3−δ cermet membrane for improved hydrogen permeation. Ceramics International, 40(3), 4117-4126. doi:10.1016/j.ceramint.2013.08.066(Balu) Balachandran, U., Lee, T. H., Park, C. Y., Emerson, J. E., Picciolo, J. J., & Dorris, S. E. (2014). Dense cermet membranes for hydrogen separation. Separation and Purification Technology, 121, 54-59. doi:10.1016/j.seppur.2013.10.001Shimura, T. (2001). Proton conduction in non-perovskite-type oxides at elevated temperatures. Solid State Ionics, 143(1), 117-123. doi:10.1016/s0167-2738(01)00839-6HAUGSRUD, R. (2007). Defects and transport properties in Ln6WO12 (Ln=La, Nd, Gd, Er). Solid State Ionics, 178(7-10), 555-560. doi:10.1016/j.ssi.2007.01.004Haugsrud, R., & Kjølseth, C. (2008). Effects of protons and acceptor substitution on the electrical conductivity of La6WO12. Journal of Physics and Chemistry of Solids, 69(7), 1758-1765. doi:10.1016/j.jpcs.2008.01.002Magrasó, A., Polfus, J. M., Frontera, C., Canales-Vázquez, J., Kalland, L.-E., Hervoches, C. H., … Haugsrud, R. (2012). Complete structural model for lanthanum tungstate: a chemically stable high temperature proton conductor by means of intrinsic defects. J. Mater. Chem., 22(5), 1762-1764. doi:10.1039/c2jm14981hSeeger, J., Ivanova, M. E., Meulenberg, W. A., Sebold, D., Stöver, D., Scherb, T., … Serra, J. M. (2013). Synthesis and Characterization of Nonsubstituted and Substituted Proton-Conducting La6–xWO12–y. Inorganic Chemistry, 52(18), 10375-10386. doi:10.1021/ic401104mScherb, T., Kimber, S. A. J., Stephan, C., Henry, P. F., Schumacher, G., Escolástico, S., … Banhart, J. (2016). Nanoscale order in the frustrated mixed conductor La5.6WO12−δ. Journal of Applied Crystallography, 49(3), 997-1008. doi:10.1107/s1600576716006415Van Holt, D., Forster, E., Ivanova, M. E., Meulenberg, W. A., Müller, M., Baumann, S., & Vaßen, R. (2014). Ceramic materials for H2 transport membranes applicable for gas separation under coal-gasification-related conditions. Journal of the European Ceramic Society, 34(10), 2381-2389. doi:10.1016/j.jeurceramsoc.2014.03.001Forster, E., van Holt, D., Ivanova, M. E., Baumann, S., Meulenberg, W. A., & Müller, M. (2016). Stability of ceramic materials for H2 transport membranes in gasification environment under the influence of gas contaminants. Journal of the European Ceramic Society, 36(14), 3457-3464. doi:10.1016/j.jeurceramsoc.2016.05.021Medvedev, D., Lyagaeva, J., Plaksin, S., Demin, A., & Tsiakaras, P. (2015). Sulfur and carbon tolerance of BaCeO3–BaZrO3 proton-conducting materials. Journal of Power Sources, 273, 716-723. doi:10.1016/j.jpowsour.2014.09.116Yang, L., Wang, S., Blinn, K., Liu, M., Liu, Z., Cheng, Z., & Liu, M. (2009). Enhanced Sulfur and Coking Tolerance of a Mixed Ion Conductor for SOFCs: BaZr 0.1 Ce 0.7 Y 0.2– x Yb x O 3–δ. Science, 326(5949), 126-129. doi:10.1126/science.1174811Duan, C., Kee, R. J., Zhu, H., Karakaya, C., Chen, Y., Ricote, S., … O’Hayre, R. (2018). Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells. Nature, 557(7704), 217-222. doi:10.1038/s41586-018-0082-6Kreuer, K. D. (2003). Proton-Conducting Oxides. Annual Review of Materials Research, 33(1), 333-359. doi:10.1146/annurev.matsci.33.022802.091825Fantin, A., Scherb, T., Seeger, J., Schumacher, G., Gerhards, U., Ivanova, M. E., … Banhart, J. (2016). Crystal structure of Re-substituted lanthanum tungstate La5.4W1−y Re y O12–δ (0 ≤ y ≤ 0.2) studied by neutron diffraction. Journal of Applied Crystallography, 49(5), 1544-1560. doi:10.1107/s1600576716011523Fantin, A., Scherb, T., Seeger, J., Schumacher, G., Gerhards, U., Ivanova, M. E., … Banhart, J. (2017). Relation between composition and vacant oxygen sites in the mixed ionic-electronic conductors La5.4W1−MO12− (M= Mo, Re; 0 ≤y≤ 0.2) and their mother compound La6−WO12− (0.4 ≤x≤ 0.8). Solid State Ionics, 306, 104-111. doi:10.1016/j.ssi.2017.04.005J.M. Serra, S. Escolástico, M.E. Ivanova, W.A. Meulenberg, H.-P. Buchkremer, D. Stöver, US2013-0216938-A1, 2013.Escolastico, S., Seeger, J., Roitsch, S., Ivanova, M., Meulenberg, W. A., & Serra, J. M. (2013). Enhanced H2Separation through Mixed Proton-Electron Conducting Membranes Based on La5.5W0.8M0.2O11.25−δ. ChemSusChem, 6(8), 1523-1532. doi:10.1002/cssc.201300091Gil, V., Gurauskis, J., Kjølseth, C., Wiik, K., & Einarsrud, M.-A. (2013). Hydrogen permeation in asymmetric La28 − xW4 + xO54 + 3x/2 membranes. International Journal of Hydrogen Energy, 38(7), 3087-3091. doi:10.1016/j.ijhydene.2012.12.105Palmqvist, L., Lindqvist, K., & Shaw, C. (2007). Porous Multilayer PZT Materials Made by Aqueous Tape Casting. Key Engineering Materials, 333, 215-218. doi:10.4028/www.scientific.net/kem.333.215Menzler, N. H., Malzbender, J., Schoderböck, P., Kauert, R., & Buchkremer, H. P. (2013). Sequential Tape Casting of Anode-Supported Solid Oxide Fuel Cells. Fuel Cells, 14(1), 96-106. doi:10.1002/fuce.201300153Schulze-Küppers, F., Baumann, S., Tietz, F., Bouwmeester, H. J. M., & Meulenberg, W. A. (2014). Towards the fabrication of La0.98−xSrxCo0.2Fe0.8O3−δ perovskite-type oxygen transport membranes. Journal of the European Ceramic Society, 34(15), 3741-3748. doi:10.1016/j.jeurceramsoc.2014.06.012Weirich, M., Gurauskis, J., Gil, V., Wiik, K., & Einarsrud, M.-A. (2012). Preparation of lanthanum tungstate membranes by tape casting technique. International Journal of Hydrogen Energy, 37(9), 8056-8061. doi:10.1016/j.ijhydene.2011.09.083Deibert, W., Schulze-Küppers, F., Forster, E., Ivanova, M. E., Müller, M., & Meulenberg, W. A. (2017). Stability and sintering of MgO as a substrate material for Lanthanum Tungstate membranes. Journal of the European Ceramic Society, 37(2), 671-677. doi:10.1016/j.jeurceramsoc.2016.09.033Escolástico, S., Vert, V. B., & Serra, J. M. (2009). Preparation and Characterization of Nanocrystalline Mixed Proton−Electronic Conducting Materials Based on the System Ln6WO12. Chemistry of Materials, 21(14), 3079-3089. doi:10.1021/cm900067kGil, V., Strøm, R. A., Groven, L. J., & Einarsrud, M.-A. (2012). La28−xW4+xO54+3x/2Powders Prepared by Spray Pyrolysis. Journal of the American Ceramic Society, 95(11), 3403-3407. doi:10.1111/j.1551-2916.2012.05377.xIvanova, M. E., Meulenberg, W. A., Palisaitis, J., Sebold, D., Solís, C., Ziegner, M., … Guillon, O. (2015). Functional properties of La0.99X0.01Nb0.99Al0.01O4−δ and La0.99X0.01Nb0.99Ti0.01O4−δ proton conductors where X is an alkaline earth cation. Journal of the European Ceramic Society, 35(4), 1239-1253. doi:10.1016/j.jeurceramsoc.2014.11.009Dittmeyer, R., Boeltken, T., Piermartini, P., Selinsek, M., Loewert, M., Dallmann, F., … Pfeifer, P. (2017). Micro and micro membrane reactors for advanced applications in chemical energy conversion. Current Opinion in Chemical Engineering, 17, 108-125. doi:10.1016/j.coche.2017.08.001Mauer, G., Vaßen, R., & Stöver, D. (2009). Thin and Dense Ceramic Coatings by Plasma Spraying at Very Low Pressure. Journal of Thermal Spray Technology, 19(1-2), 495-501. doi:10.1007/s11666-009-9416-0Bakan, E., & Vaßen, R. (2017). Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties. Journal of Thermal Spray Technology, 26(6), 992-1010. doi:10.1007/s11666-017-0597-7Jarligo, M. O., Mauer, G., Bram, M., Baumann, S., & Vaßen, R. (2013). Plasma Spray Physical Vapor Deposition of La1−x Sr x Co y Fe1−y O3−δ Thin-Film Oxygen Transport Membrane on Porous Metallic Supports. Journal of Thermal Spray Technology, 23(1-2), 213-219. doi:10.1007/s11666-013-0004-yMarcano, D., Mauer, G., Sohn, Y. J., Vaßen, R., Garcia-Fayos, J., & Serra, J. M. (2016). Controlling the stress state of La1−Sr Co Fe1−O3− oxygen transport membranes on porous metallic supports deposited by plasma spray–physical vapor process. Journal of Membrane Science, 503, 1-7. doi:10.1016/j.memsci.2015.12.029Marcano, D., Mauer, G., Vaßen, R., & Weber, A. (2017). Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying (APS) and plasma spray-physical vapor deposition (PS-PVD). Surface and Coatings Technology, 318, 170-177. doi:10.1016/j.surfcoat.2016.10.088D. Marcano, G. Mauer, Y.J. Sohn, A. Schwedt, M. Bram, M.E. Ivanova, R. Vaßen, Plasma spray-physical vapor deposition of single phase lanthanum tungstate for hydrogen gas separation membranes, t.b. submitted (2018).Brunauer, S., Emmett, P. H., & Teller, E. (1938). Adsorption of Gases in Multimolecular Layers. Journal of the American Chemical Society, 60(2), 309-319. doi:10.1021/ja01269a023Ried, P., Lorenz, C., Brönstrup, A., Graule, T., Menzler, N. H., Sitte, W., & Holtappels, P. (2008). Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC. Journal of the European Ceramic Society, 28(9), 1801-1808. doi:10.1016/j.jeurceramsoc.2007.11.018R. Mücke, Sintering of ZrO2-electrolytes in multilayered assemblies of SOFC, PhD Thesis, Ruhr-University, Bochum, 2007.Amsif, M., Magrasó, A., Marrero-López, D., Ruiz-Morales, J. C., Canales-Vázquez, J., & Núñez, P. (2012). Mo-Substituted Lanthanum Tungstate La28–yW4+yO54+δ: A Competitive Mixed Electron–Proton Conductor for Gas Separation Membrane Applications. Chemistry of Materials, 24(20), 3868-3877. doi:10.1021/cm301723aDANIELS, A. U., LOWRIE, R. C., GIBBY, R. L., & CUTLER, I. B. (1962). Observations on Normal Grain Growth of Magnesia and Calcia. Journal of the American Ceramic Society, 45(6), 282-285. doi:10.1111/j.1151-2916.1962.tb11145.

Linking Microscopic Spatial Patterns of Tissue Destruction in Emphysema to Macroscopic Decline in Stiffness Using a 3D Computational Model

Pulmonary emphysema is a connective tissue disease characterized by the progressive destruction of alveolar walls leading to airspace enlargement and decreased elastic recoil of the lung. However, the relationship between microscopic tissue structure and decline in stiffness of the lung is not well understood. In this study, we developed a 3D computational model of lung tissue in which a pre-strained cuboidal block of tissue was represented by a tessellation of space filling polyhedra, with each polyhedral unit-cell representing an alveolus. Destruction of alveolar walls was mimicked by eliminating faces that separate two polyhedral either randomly or in a spatially correlated manner, in which the highest force bearing walls were removed at each step. Simulations were carried out to establish a link between the geometries that emerged and the rate of decline in bulk modulus of the tissue block. The spatially correlated process set up by the force-based destruction lead to a significantly faster rate of decline in bulk modulus accompanied by highly heterogeneous structures than the random destruction pattern. Using the Karhunen-Loève transformation, an estimator of the change in bulk modulus from the first four moments of airspace cell volumes was setup. Simulations were then obtained for tissue destruction with different idealized alveolar geometry, levels of pre-strain, linear and nonlinear elasticity assumptions for alveolar walls and also mixed destruction patterns where both random and force-based destruction occurs simultaneously. In all these cases, the change in bulk modulus from cell volumes was accurately estimated. We conclude that microscopic structural changes in emphysema and the associated decline in tissue stiffness are linked by the spatial pattern of the destruction process