Dimethyl ether in its ground state, v=0, and lowest two torsionally excited states, v11=1 and v15=1, in the high-mass star-forming region G327.3-0.6

The goal of this paper is to determine the respective importance of solid state vs. gas phase reactions for the formation of dimethyl ether. This is done by a detailed analysis of the excitation properties of the ground state and the torsionally excited states, v11=1 and v15=1, toward the high-mass star-forming region G327.3-0.6. With the Atacama Pathfinder EXperiment 12 m submillimeter telescope, we performed a spectral line survey. The observed spectrum is modeled assuming local thermal equilibrium. CH3OCH3 has been detected in the ground state, and in the torsionally excited states v11=1 and v15=1, for which lines have been detected here for the first time. The emission is modeled with an isothermal source structure as well as with a non-uniform spherical structure. For non-uniform source models one abundance jump for dimethyl ether is sufficient to fit the emission, but two components are needed for the isothermal models. This suggests that dimethyl ether is present in an extended region of the envelope and traces a non-uniform density and temperature structure. Both types of models furthermore suggest that most dimethyl ether is present in gas that is warmer than 100 K, but a smaller fraction of 5%-28% is present at temperatures between 70 and 100 K. The dimethyl ether present in this cooler gas is likely formed in the solid state, while gas phase formation probably is dominant above 100 K. Finally, the v11=1 and v15=1 torsionally excited states are easily excited under the density and temperature conditions in G327.3-0.6 and will thus very likely be detectable in other hot cores as well.Comment: 12 pages (excluding appendices), 8 figures, A&A in pres