1,298 research outputs found
Enhancement of the Deuteron-Fusion Reactions in Metals and its Experimental Implications
Recent measurements of the reaction d(d,p)t in metallic environments at very
low energies performed by different experimental groups point to an enhanced
electron screening effect. However, the resulting screening energies differ
strongly for divers host metals and different experiments. Here, we present new
experimental results and investigations of interfering processes in the
irradiated targets. These measurements inside metals set special challenges and
pitfalls which make them and the data analysis particularly error-prone. There
are multi-parameter collateral effects which are crucial for the correct
interpretation of the observed experimental yields. They mainly originate from
target surface contaminations due to residual gases in the vacuum as well as
from inhomogeneities and instabilities in the deuteron density distribution in
the targets. In order to address these problems an improved differential
analysis method beyond the standard procedures has been implemented. Profound
scrutiny of the other experiments demonstrates that the observed unusual
changes in the reaction yields are mainly due to deuteron density dynamics
simulating the alleged screening energy values. The experimental results are
compared with different theoretical models of the electron screening in metals.
The Debye-H\"{u}ckel model that has been previously proposed to explain the
influence of the electron screening on both nuclear reactions and radioactive
decays could be clearly excluded.Comment: 22 pages, 12 figures, REVTeX4, 2-column format. Submitted to Phys.
Rev. C; accepte
Эксплуатационная надежность асинхронных двигателей лифтов
Цель работы: Исследование эксплуатационной надежности асинхронных двигателей для лифтов.
Задачи: Проанализировать данные и причины отказов двигателей. Исследовать существующие математические модели расчета эксплуатационной надежности статоров двигателей. Выбрать наиболее подходящую модель и произвести расчет эксплуатационной надежности.Elevator is a specific vehicle ment to transport people and cargo. Long interstorey conveyance in tall buildings and deep mines With the help of elevators became possible. It is a distinction of elevator from any other vehicles that any passenger inside may operate it. This is possible due to development of automation. Elevator is considered to be a complex of electromechanical equipment, thus its constructional design is an object of stringent requirements provided by Rules of installation and safe operation of elevators. From the beginning of installation and until the end of elevator usage, it is crucial to meet the requirements of the Rules to ensure passengers’ safety. There are two types of elevators: the electric and the hydraulic ones. The most commonly used type is naturally elec
The influence of chemical composition and mixing state of Los Angeles urban aerosol on CCN number and cloud properties
International audienceThe relationship between cloud condensation nuclei (CCN) number and the physical and chemical properties of the atmospheric aerosol distribution is explored for a polluted urban data set from the Study of Organic Aerosols at Riverside I (SOAR-1) campaign conducted at Riverside, California, USA during summer 2005. The mixing state and, to a lesser degree, the average chemical composition are shown to be important parameters in determining the activation properties of those particles around the critical activation diameters for atmospherically-realistic supersaturation values. Closure between predictions and measurements of CCN number at several supersaturations is attempted by modeling a number of aerosol chemical composition and mixing state schemes of increasing complexity. It is shown that a realistic treatment of the state of mixing of the urban aerosol distribution is critical in order to eliminate model bias. Fresh emissions such as elemental carbon and small organic particles must be treated as non-activating and explicitly accounted for in the model scheme. The relative number concentration of these particles compared to inorganics and oxygenated organic compounds of limited hygroscopicity plays an important role in determining the CCN number. Furthermore, expanding the different composition/mixing state schemes to predictions of cloud droplet number concentration in a cloud parcel model highlights the dependence of cloud optical properties on the state of mixing and hygroscopic properties of the different aerosol modes, but shows that the relative differences between the different schemes are reduced compared to those from the CCN model
Origins and composition of fine atmospheric carbonaceous aerosol in the Sierra Nevada Mountains, California
In this paper we report chemically resolved measurements
of organic aerosol (OA) and related tracers during the Biosphere Effects on Aerosols and Photochemistry Experiment (BEARPEX) at the Blodgett Forest Research Station, California from 15 August–10 October 2007. OA contributed the majority of the mass to the fine atmospheric particles and was predominately oxygenated (OOA). The highest concentrations of OA were during sporadic wildfire influence when aged plumes were impacting the site. In
situ measurements of particle phase molecular markers were dominated by secondary compounds and along with gas phase compounds could be categorized into six factors or sources: (1) aged biomass burning emissions and oxidized urban emissions, (2) oxidized urban emissions (3) oxidation products of monoterpene emissions, (4) monoterpene emissions, (5) anthropogenic emissions and (6) local
methyl chavicol emissions and oxidation products. There were multiple biogenic components that contributed to OA at this site whose contributions varied diurnally, seasonally and in response to changing meteorological conditions, e.g. temperature and precipitation events. Concentrations of isoprene oxidation products were larger when temperatures were higher during the first half of the campaign (15 August–12 September) due to more substantial emissions of isoprene and enhanced photochemistry. The oxidation of methyl chavicol, an oxygenated terpene emitted by
ponderosa pine trees, contributed similarly to OA throughout the campaign. In contrast, the abundances of monoterpene oxidation products in the particle phase were greater during the cooler conditions in the latter half of the campaign (13 September–10 October), even though emissions of the precursors were lower, although the mechanism is not known. OA was correlated with the anthropogenic tracers 2-propyl nitrate and carbon monoxide (CO), consistent with previous observations, while being comprised of mostly non-fossil carbon (>75%). The correlation between OA and an anthropogenic tracer does not necessarily identify the source of the carbon as being anthropogenic but instead suggests a coupling between the anthropogenic and biogenic components in the air mass that might be related to the source of the oxidant and/or the aerosol sulfate. Observations of organosulfates of isoprene and α-pinene provided evidence for the likely importance of aerosol sulfate in spite of neutralized aerosol although acidic plumes might have played a role upwind of the site. This is in contrast to laboratory studies where strongly acidic seed aerosols were needed in order to form these compounds. These compounds together represented only a minor fraction (<1%) of the total OA mass, which may be the result of the neutralized aerosol at the site or because only a small number of organosulfates were quantified. The low contribution of organosulfates to total OA suggests that other mechanisms, e.g. NO_x enhancement of oxidant levels, are likely responsible for the majority of the anthropogenic enhancement of biogenic secondary organic aerosol observed at this site
Characterization of three new condensation particle counters for sub-3 nm particle detection during the Helsinki CPC workshop : the ADI versatile water CPC, TSI 3777 nano enhancer and boosted TSI 3010
In this study we characterized the performance of three new particle counters able to detect particles smaller than 3 nm during the Helsinki condensation particle counter (CPC) workshop in summer 2016: the Aerosol Dynamics Inc. (ADI; Berkeley, USA) versatile water condensation particle counter (vWCPC), TSI 3777 nano enhancer (TSI Inc., Shoreview, USA) and modified and boosted TSI 3010-type CPC from Universite Blaise Pascal called a B3010. The performance of all CPCs was first measured with charged tungsten oxide test particles at temperature settings which resulted in supersaturation low enough to not detect any ions produced by a radioactive source. Due to similar measured detection efficiencies, additional comparison between the 3777 and vWCPC were conducted using electrically neutral tungsten oxide test particles and with positively charged tetradodecylammonium bromide. Furthermore, the detection efficiencies of the 3777 and vWCPC were measured with boosted temperature settings yielding supersaturation which was at the onset of homogeneous nucleation for the 3777 or confined within the range of liquid water for the ADI vWCPC. Finally, CPC-specific tests were conducted to probe the response of the 3777 to various inlet flow relative humidities, of the B3010 to various inlet flow rates and of the vWCPC to various particle concentrations. For the 3777 and vWCPC the measured 50% detection diameters (d50s) were in the range of 1.3-2.4 nm for the tungsten oxide particles, depending on the particle charging state and CPC temperature settings, between 2.5 and 3.3 nm for the organic test aerosol, and in the range of 3.2-3.4 nm for tungsten oxide for the B3010.Peer reviewe
Islet isolation assessment in man and large animals
Recent progress in islet isolation from the pancreas of large mammals including man, accentuated the need for the development of precise and reproducible techniques to assess islet yield. In this report both quantitative and qualitative criteria for islet isolation assessment were discussed, the main topics being the determination of number, volume, purity, morphologic integrity and in vitro and in vivo function tests of the final islet preparations. It has been recommended that dithizone should be used as a specific stain for immediate detection of islet tissue making it possible to estimate both the total number of islets (dividing them into classes of 50 μ diameter range increments) and the purity of the final preparation. Appropriate morphological assessment should include confirmation of islet identification, assessment of the morphological integrity and of the purity of the islet preparation. The use of fluorometric inclusion and exclusion dyes together have been suggested as a viability assay to simultaneously quantitate the proportion of cells that are intact or damaged. Perifusion of islets with glucose provides a dynamic profile of glucose-mediated insulin release and of the ability of the cells to down regulate insulin secretion after the glycemic challenge is interrupted. Although perifusion data provides a useful guide to islet viability the quantity and kinetics of insulin release do not necessarily predict islet performance after implantation. Therefore, the ultimate test of islet viability is their function after transplantation into a diabetic recipient. For this reason, in vivo models of transplantation of an aliquot of the final islet preparation into diabetic nude (athymic) rodents have been suggested. We hope that these general guidelines will be of assistance to standardize the assessment of islet isolations, making it possible to better interpret and compare procedures from different centers. © 1990 Casa Editrice il Ponte
Прогнозирование влияния добычи метана из угольных пластов на подземные воды Тутуясского района Кузнецкого бассейна
Do contaminants originating from state-of-the-art treated wastewater impact the ecological quality of surface waters?
Since the 1980s, advances in wastewater treatment technology have led to considerably improved surface water quality in the urban areas of many high income countries. However, trace concentrations of organic wastewater-associated contaminants may still pose a key environmental hazard impairing the ecological quality of surface waters. To identify key impact factors, we analyzed the effects of a wide range of anthropogenic and environmental variables on the aquatic macroinvertebrate community. We assessed ecological water quality at 26 sampling sites in four urban German lowland river systems with a 0–100% load of state-of-the-art biological activated sludge treated wastewater. The chemical analysis suite comprised 12 organic contaminants (five phosphor organic flame retardants, two musk fragrances, bisphenol A, nonylphenol, octylphenol, diethyltoluamide, terbutryn), 16 polycyclic aromatic hydrocarbons, and 12 heavy metals. Non-metric multidimensional scaling identified organic contaminants that are mainly wastewater-associated (i.e., phosphor organic flame retardants, musk fragrances, and diethyltoluamide) as a major impact variable on macroinvertebrate species composition. The structural degradation of streams was also identified as a significant factor. Multiple linear regression models revealed a significant impact of organic contaminants on invertebrate populations, in particular on Ephemeroptera, Plecoptera, and Trichoptera species. Spearman rank correlation analyses confirmed wastewater-associated organic contaminants as the most significant variable negatively impacting the biodiversity of sensitive macroinvertebrate species. In addition to increased aquatic pollution with organic contaminants, a greater wastewater fraction was accompanied by a slight decrease in oxygen concentration and an increase in salinity. This study highlights the importance of reducing the wastewater-associated impact on surface waters. For aquatic ecosystems in urban areas this would lead to: (i) improvement of the ecological integrity, (ii) reduction of biodiversity loss, and (iii) faster achievement of objectives of legislative requirements, e.g., the European Water Framework Directive
Disordered ultracold atomic gases in optical lattices: A case study of Fermi-Bose mixtures
We present a review of properties of ultracold atomic Fermi-Bose mixtures in
inhomogeneous and random optical lattices. In the strong interacting limit and
at very low temperatures, fermions form, together with bosons or bosonic holes,
{\it composite fermions}. Composite fermions behave as a spinless interacting
Fermi gas, and in the presence of local disorder they interact via random
couplings and feel effective random local potential. This opens a wide variety
of possibilities of realizing various kinds of ultracold quantum disordered
systems. In this paper we review these possibilities, discuss the accessible
quantum disordered phases, and methods for their detection. The discussed
quantum phases include Fermi glasses, quantum spin glasses, "dirty"
superfluids, disordered metallic phases, and phases involving quantum
percolation.Comment: 29 pages and 11 figure
- …