Evidence for the use of a Diamond Drill for Bead Making in Sri-Lanka

The use of a diamond splinter turned by a bow drill to drill the quartz beads in present day Cambay, India has been documented. A group of Cambay beads were made available for study. They were compared with a similar group of quartz beads excavated in Mantai, Sri-Lanka. These were dated stratigraphically c.700-1000 A.D. Silicone impressions were made of the drill holes from selected beads from both Cambay and Mantai. These were examined by means of scanning electron microscopy. The pattern of drilling was the same, suggesting that the technique of drilling with a diamond splinter and bow drill was an ancient one. This has not been previously reported

A Brief History of Drills and Drilling

A microscopic examination of silicone impressions of the perforations of beads, sealstones, and amulets has produced a data base of characteristics that help to define what type of drill was used to make them. This article outlines the various types of drills that have been used from the Palaeolithic period to the present day, and notes what microscopic features characterize each one. Scanning electron micrographs illustrate the minute details that are revealed by the silicone impressions

Dentin Bonding: SEM Comparison of the Resin-Dentin Interface in Primary and Permanent Teeth

Previous studies have suggested minor differences between primary and permanent teeth in terms of dentin composition and morphology. Other reports indicated lower bond strengths of resin composites to dentin of primary teeth compared with dentin of permanent teeth; however, no information is available regarding differences in the micromorphology of the resin-dentin interface that may explain these lower bond strengths. Therefore, the purpose of the present study was to compare primary and permanent teeth in terms of the thickness of the hybrid layer developed with two bonding systems. Our hypothesis was that bonding differences previously reported between primary and permanent dentin would be reflected in hybrid layer differences observable in SEM analyses. Twenty human extracted and non-carious teeth were divided into 4 groups: 5 primary and 5 permanent teeth restored with All-Bond 2/Bisfil P system; and 5 primary and 5 permanent teeth restored with Scotchbond Multi-Purpose/ZlOO. The sample area available on each tooth was divided for the two dentin conditioning times (7 and 15 sec). Measurements of hybrid layer thickness were performed by means of SEM at xl3,000. The results of this study indicated that the hybrid layer produced is significantly thicker in primary than in permanent teeth (p = 0.0001), suggesting that primary tooth dentin is more reactive to acid conditioning. No difference was observed in the hybrid layers produced by the two adhesive systems (p = 0.7920). The increased thickness of the hybrid layer in primary teeth (25 to 30%) and the subsequent lack of complete penetration of adhesive resin into previously demineralized dentin may contribute to the lower bond strengths to primary dentin reported in the literature. If a narrower hybrid layer more uniformly infused with resin is the goal of dentin bonding, it is concluded that a differentiated protocol for bonding to primary dentin (with shorter time for dentin conditioning) can be used as a means to reproduce the hybrid layer thickness seen in permanent teeth.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67017/2/10.1177_00220345960750061101.pd

The rise of dentine hypersensitivity and tooth wear in an ageing population

Our understanding of the aetiology of dentine hypersensitivity (DH) has changed dramatically over the past few decades. It is no longer an enigma, but other problems exist. The prevalence of DH in the world and in particular in the UK is increasing, predominately due to increases in tooth wear and the erosive dietary intake in the younger population. DH is increasingly reported in all age groups and is shown to provide clinical indication of an active erosive tooth wear. As the population ages and possibly retain teeth for longer, the likelihood of tooth wear and DH could increase. This paper describes the prevalence, aetiology, diagnosis and management of DH in relation to tooth wear, which work together through a surface phenomenon. The aim is to raise awareness of the conditions and to help inform a prevention strategy in an ageing population, which starts from younger age groups to reduce disease into older age

Plastic Pollution, Waste Management Issues, and Circular Economy Opportunities in Rural Communities

Rural areas are exposed to severe environmental pollution issues fed by industrial and agricultural activities combined with poor waste and sanitation management practices, struggling to achieve the United Nations’ Sustainable Development Goals (SDGs) in line with Agenda 2030. Rural communities are examined through a “dual approach” as both contributors and receivers of plastic pollution leakage into the natural environment (through the air–water–soil–biota nexus). Despite the emerging trend of plastic pollution research, in this paper, we identify few studies investigating rural communities. Therefore, proxy analysis of peer-reviewed literature is required to outline the significant gaps related to plastic pollution and plastic waste management issues in rural regions. This work focuses on key stages such as (i) plastic pollution effects on rural communities, (ii) plastic pollution generated by rural communities, (iii) the development of a rural waste management sector in low- and middle-income countries in line with the SDGs, and (iv) circular economy opportunities to reduce plastic pollution in rural areas. We conclude that rural communities must be involved in both future plastic pollution and circular economy research to help decision makers reduce environmental and public health threats, and to catalyze circular initiatives in rural areas around the world, including less developed communitie