Comparison of Accuracy and Reproducibility of Casts Made by Digital and Conventional Methods

Statement of problem Little peer-reviewed information is available regarding the accuracy and reproducibility of digitally fabricated casts compared to conventional nondigital methods. Purpose The purpose of this in vitro study was to compare the accuracy and reproducibility of a digital impression and cast fabrication with a conventional impression and cast fabrication. Material and methods Conventional impressions were made via a 1-step single viscosity technique with vinyl siloxanether material of a typodont master model, and conventional casts were cast from dental stone. Digital impressions were obtained with a digital scanner, and digital stereolithographic models were printed. The typodont and fabricated casts were digitized with a structured light scanner and saved in surface tessellation language (STL) format. All STL records were superimposed via a best-fit method. The digital impression and cast fabrication method was compared with the conventional impression and cast fabrication method for discrepancy, accuracy, and reproducibility. The Levene test was used to determine equality of variances, and a 1-way ANOVA was conducted to assess the overall statistical significance of differences among the groups (n=5, α=.05). Results No significant statistical difference was found between the digital cast and conventional casts in the internal area or finish line area (P\u3e.05). In addition, there was no statistically significant difference between these 2 techniques for a fixed dental prosthesis or single crown (P\u3e.05). However, statistically significant differences were observed for overall areas of the casts in terms of accuracy (PP Conclusions No statistically significant difference was found between the digital cast and conventional cast groups in the internal and finish line areas. However, in terms of the reproducibility and accuracy of the entire cast area, the conventional cast was significantly better than the digital cast

Evaluation of A Post-Treatment Follow-Up Program in Patients with Oral Squamous Cell Carcinoma

Objectives The duration and the frequency of follow-up after treatment of oral squamous cell carcinoma are not standardized in the current literature. The purpose of this study was to evaluate our local standard post-treatment and follow-up protocol. Materials and methods Overall, 228 patients treated curatively from 01/2006 to 07/2013 were reviewed. To evaluate the follow-up program, data on the secondary event were used. To determine risk groups, all patients with tumor recurrence were specifically analyzed. Relapse-free rate were estimated by the Kaplan-Meier product limit method. The chi-square test was used to identify independent risk factors for tumor relapse. Results In total, 29.8 % patients had a secondary event. The majority of the relapse cases (88.2 %) were detected within 2 years postoperatively, 61.8 % of them within the first year. Most events were local recurrences (34.7 %). UICC-stage IV was significantly associated with tumor recurrence (p = 0.001). Gender (p = 0.188), age (p = 0.195), localization (p = 0.739), T-stage (p = 0.35), N-stage (p = 0.55), histologic grade (p = 0.162), and tobacco and alcohol use (p = 0.248) were not significantly associated with tumor recurrence. Patients with positive neck nodes relapsed earlier (p = 0.011). The majority of relapses (86.3 %) were found in asymptomatic patients at routine follow-up. Conclusions The results of this study suggest an intensified follow-up within the first 2 years after surgery. Clinical relevance Given the higher relapse rate of patients exhibiting an UICC-stage IV and/or positive neck nodes, it seems to be from special interest to perform in this group a risk-adapted follow-up with monthly examinations also in the second year

Oral Health and Dental Anxiety in a German Practice-based Sample

Objective Does dental anxiety have an effect on dental and periodontal health? Methods Survey data was collected from n = 200 adults (53 % females, average age 49 years) in a cross-sectional study. Dental anxiety was measured with the modified dental anxiety scale (MDAS, score 1–5, the greater the score, the greater the anxiety). Clinical parameters including probing depth (PD), clinical attachment level (CAL), plaque index (SLI), and bleeding on probing (BoP) as well as the DMFT index were recorded and statistically analyzed. Results Rating of dental anxiety was higher in women than in men (65 vs 35 %). Subjects with higher MDAS values visited the dentist less frequently (p = 0.001) and had more decay (DT 6.7 ± 4.2 vs 1.7 ± 2.4; p \u3c 0.001) but fewer filled teeth than subjects with lower ratings of dental anxiety (FT 7.1 ± 4.5 vs 9.8 ± 5.7; p = 0.042). There were no differences in PD or CAL between subjects with or without dental anxiety, while patients with higher MDAS value showed significantly more BoP (50 ± 19 vs 34 ± 20 %; p = 0.002) than patients with low MDAS scores (no or low dental anxiety). Conclusions Patients with higher ratings of dental anxiety had significantly more caries experience and gingivitis. Therefore, dental anxiety is associated with negative effect on dental and periodontal health. Clinical relevance Identifying patients with high dental anxiety and helping to manage this anxiety has important implications to improve oral health in adults. The MDAS appears to be an easy and efficient tool that can be used to identify patients with dental anxiety in dental practices

The Isolated Orbital Floor Fracture from a Transconjunctival or Subciliary Perspective-A Standardized Anthropometric Evaluation

Background: The influence of orbital fractures and their repair on the rate of deformities of the lower eyelid is an ongoing source of discussion in the literature. Most of the present studies include isolated blow-out as well as combined orbital fractures. Material and Methods: We present a retrospective evaluation of a series of 100 patients after isolated blow-out fracture repair using reference anthropometric data on standardized photographs. Analysis included eye fissure width and height, lid sulcus height, upper lid height, upper and lower iris coverage, position of cornea to palpebra inferior, canthal tilt, scleral show, ectropion and entropion. It was clearly distinguished between operated and contralateral eyelid, whether a transconjunctival or a subciliary approach was performed and amount of fracture. Our main interests were changes of the aforementioned parameters with regards to eyelid deformities. Results: Surgery per se did not significantly influence eyelid deformities. However, the surgical approach selected significantly affected eye fissure index, lower iris coverage and rate of scleral show, indicating retraction of the lower eyelid. Conclusions: The standardized measurements described here are accurate and objective to evaluate postoperative results. The subciliary approach included the highest risk of lower lid retraction as compared to transconjunctival approaches

Quality of Postoperative Pain Management after Midfacial Fracture Repair—An Outcome-oriented Study

Objectives There is a lack of literature regarding the procedure-specific quality of acute postoperative pain management after midfacial fracture repair. The purpose of the presented prospective clinical study was to evaluate postoperative pain management after surgical repair of midfacial fractures. Materials and methods Eighty-five adults were evaluated on the first postoperative day following midfacial repair using the questionnaire of the Quality Improvement in Postoperative Pain Management (QUIPS) project. The main outcome measures were patients’ characteristics and clinical- and patient-reported outcome parameters. Results Overall, pain on the first postoperative day was moderate. A significant correlation between process and outcome parameters could be shown. Duration of surgery above the calculated median was significantly associated with higher maximum pain intensity (p = 0.017). Patients requiring opioids in the recovery room presented significantly higher pain on activity (p = 0.029) and maximum pain (p = 0.035). Sleeping impairment (p = 0.001) and mood disturbance (p = 0.008) were significantly more prevalent in patients undergoing repair of a centrolateral midfacial fracture. Conclusions QUIPS is a simple and qualified tool to evaluate the procedure specific quality of acute postoperative pain management. Pain on the first postoperative day following midfacial fracture repair seems overall to be moderate. Nearly a third of the patients showed inadequate postoperative pain management. To prevent inadequate postoperative pain management, it is necessary to establish a continued procedure-specific outcome measurement

Comparison of Gingival Retraction Materials Using a New Gingival Sulcus Model

Purpose To investigate the pressure generated by different retraction materials using a novel gingival sulcus model. Materials and Methods A gingival sulcus model was made using a polymer frame filled with silicon. A pressure sensor and a sulcus‐fluid simulation were embedded into the silicon chamber to evaluate the pressure generated by different retraction materials. Six sizes of Ultrapak retraction cords (Ultradent, sizes #000 ‐ 3), 4 retraction pastes (Expazen, Expasyl, Acteon, Access Edge, Traxodent) and 2 retraction gels (Sulcus Blue, Racegel) were analyzed. The mean and median pressure, interquartile range, and standard deviation (SD) of n = 10 repeated measurements were calculated. Statistical analysis was conducted by Kruskal‐Wallis test for differences between the main groups of retraction materials, and Mann‐Whitney U‐test was performed to analyze differences between the single retraction materials. Results Pressure (mean ± SD) generated by retraction cords increased with increasing size (48.26 ± 11.29 kPa, size #000 to 149.27 ± 28.75 kPa for #3). There was a significant difference between sizes (p \u3c 0.01), except in #0 versus #1, and #2 versus #3. Retraction pastes generated pressures that ranged from 82.74 ± 29.29 kPa (Traxodent) to 524.35 ± 113.88 kPa (Expasyl). Retraction gels generated pressures from 38.96 ± 14.68 kPa (Racegel) to 95.15 ± 24.18 kPa (Sulcus Blue). Pressure generated by Expasyl was significantly higher than pressure generated by all other tested materials (p \u3c 0.001). Conclusion Pressure generated by retraction pastes and gels depends on the consistency of the retraction material, while pressure generated by retraction cords increased with increasing size of cords. Expasyl was found to generate the highest pressure compared to all other retraction materials

Inhibition of \u3cem\u3eCandida albicans\u3c/em\u3e and Mixed Salivary Bacterial Biofilms on Antimicrobial Loaded Phosphated Poly(methyl methacrylate)

Biofilms play a crucial role in the development of Candida-associated denture stomatitis. Inhibition of microbial adhesion to poly(methyl methacrylate) (PMMA) and phosphate containing PMMA has been examined in this work. C. albicans and mixed salivary microbial biofilms were compared on naked and salivary pre-conditioned PMMA surfaces in the presence or absence of antimicrobials (Cetylpyridinium chloride [CPC], KSL-W, Histatin 5 [His 5]). Polymers with varying amounts of phosphate (0–25%) were tested using four C. albicans oral isolates as well as mixed salivary bacteria and 24 h biofilms were assessed for metabolic activity and confirmed using Live/Dead staining and confocal microscopy. Biofilm metabolism was reduced as phosphate density increased (15%: p = 0.004; 25%: p = 0.001). Loading of CPC on 15% phosphated disks showed a substantial decrease (p = 0.001) in biofilm metabolism in the presence or absence of a salivary pellicle. Salivary pellicle on uncharged PMMA enhanced the antimicrobial activity of CPC only. CPC also demonstrated remarkable antimicrobial activity on mixed salivary bacterial biofilms under different conditions displaying the potent efficacy of CPC (350 µg/mL) when combined with an artificial protein pellicle (Biotene half strength)

Longterm quality of life after oncologic surgery and microvascular free flap reconstruction in patients with oral squamous cell carcinoma

Background: Quality of life (QoL) has become increasingly important in cancer treatment. It refers to the patient’s perception of the effects of the disease and therapy, and their impact on daily functioning and general feeling of well being. Material and Methods: In this prospective study, a total of 100 patients treated at our institution, completed the European Organization for Research and Treatment of Cancer (EORTC) QLQ-C30 questionnaire and the specific EORTC QLQ-H&N35 module. The questionnaires were distributed to the patients between 12 and 60 months postoperatively. Results: Global QoL score was 58.3 and mean score for functioning scale was 76.7. Fatigue (28.7 ± 26.1), followed by financial problems (27.7 ± 33.5), insomnia (26.7 ± 34.5) and pain (26.3 ± 29.9) had highest symptom score on QLQ-C30. Fatigue (r=-0.488), insomnia (r=-0.416) and pain (r =-0.448) showed highest value for significantly negative correlation to global QoL. In the H&N35 module, restriction of mouth opening (43.3 ± 38.6), dry mouth (40.7 ± 36.9), sticky saliva (37.3 ± 37.1) and eating in public (33.8 ± 31.9) were the four worst symptoms. Swallowing problem (r=-0.438), eating in public (r=-0.420) and persistent severe speech (r=-0.398) ranked as the three worst symptoms with highest value for significantly negative correlation to global QoL. Conclusions: Longterm QoL after oncologic surgery and microvascular free flap reconstruction in patients with oral cancer is satisfactory. Measuring QoL should be considered as part of the evaluation of cancer treatment

Salivary MMP-9 in the detection of oral squamous cell carcinoma

Oral squamous cell carcinoma (OSCC) is the most common malignant tumour of the oral cavity. Detection of OSCC is currently based on clinical oral examination combined with histopathological evaluation of a biopsy sample. Direct contact between saliva and the oral cancer makes measurement of salivary metalloproteinase- 9 (MMP-9) an attractive alternative. In total, 30 OSCC patients and 30 healthy controls were included in this prospective study. Saliva samples from both groups were collected, centrifuged and supernatant fluid was subjected to ELISA for assessment of MMP-9. The median salivary MMP-9 values with interquartile range (IQR) of OSCC patients and the control group were statistically analysed using the Mann-Whitney U-test. The receiver operating characteristic (ROC) curve was constructed and the area under curve (AUC) was computed. The median absorbance MMP-9 value of the OSCC group was 0.186 (IQR=0.158) and that of control group was 0.156 (IQR=0.102). MMP-9 was significantly increased in the OSCC patients than in the controls by +19.2% (p=0.008). Median values in patients with recurrence and in patients with primary event were 0.233 (IQR=0.299) and 0.186 (IQR=0.134) respectively. MMP-9 was significantly increased in patients with primary event (p=0.017) compared to controls by +19.2%. No significant increase of MMP-9 level was detected when comparing patients with recurrence and healthy controls (+49.4%; p=0.074). The sensitivity value of MMP-9 was 100% whereas the specificity value was 26.7% with AUC of 0.698. The present data indicates that the elevation of salivary levels of MMP-9 may be a useful adjunctive diagnostic tool for detection of OSCC. However, further studies are necessary to provide scientific and clinical validation

Quality of Postoperative Pain Management After Maxillofacial Fracture Repair

Background: Effective pain management is an essential component in the perioperative care of surgical patients. However, post-operative pain after maxillofacial fracture repair and its optimal therapy has not been described in detail. Materials and Methods: In a prospective cohort study, 95 adults rated their pain on the first postoperative day after maxillofacial fracture repair using the questionnaire of the Quality Improvement in Postoperative Pain Management (QUIPS) project. Quality Improvement in Postoperative Pain Management allowed for a standardized assessment of patients’ characteristics and pain- related parameters. Results: Overall, the mean maximal pain and pain on activity (numeric rating scales) were significantly higher in patients with mandibular fractures than in patients with midface fractures (P = 0.002 and P = 0.045, respectively). In patients with mandibular fractures, a longer duration of surgery was significantly associated with higher satisfaction with pain intensity (P = 0.015), but was more frequently associated with postoperative vomiting (P = 0.023). A shorter duration of surgery and an absence of preoperative pain counseling in these patients were significantly correlated to desire for more pain medication (P = 0.049 and P = 0.004, respectively). Patients with mandibular fractures that received opioids in the recovery room had significantly higher strain-related pain (P = 0.017). In patients with midface fractures, a longer duration of surgery showed significantly higher levels of decreased mobility (P = 0.003). Patients receiving midazolam for premedication had significantly less minimal pain (P = 0.021). Conclusions: Patients with mandibular fractures seem to have more postoperative pain than patients with midface fractures. Monitoring of postsurgical pain and a procedure-specific pain-treatment protocol should be performed in clinical routine