Large Bi-2212 single crystal growth by the floating-zone technique

Effects of the growth velocity on the crystal growth behavior of Bi_2Sr_2Ca_1Cu_2O_x (Bi-2212) have been studied by floating zone technique. The results show that a necessary condition for obtaining large single crystals along the c-axis is that the solid-liquid interface of a growing rod maintains a stable planar growth front. The planar liquid-solid growth interface tends to break down into a cellular interface, while the growth velocity is higher than 0.25 mm/h. Single crystals of up to 50x7.2x7 mm3 along the a-, b- and caxes have been cut in a 7.2 mm diameter rod with optimum growth conditions. Tconset is 91 K measured by magnetic properties measurement system (MPMS) for as-grown crystals. Optical polarization microscope and neutron diffraction show that the quality of the single crystals is good.Comment: 5 pages, 4 figure

Structured illumination microscopy using micro-pixellated light-emitting diodes

Structured illumination is a flexible and economical method of obtaining optical sectioning in wide-field microscopy [1]. In this technique the illumination system is modified to project a single-spatial frequency grid pattern onto the sample [2, 3]. The pattern can only be resolved in the focal plane and by recording images for different transverse grid positions (or phases) an image of the in-focus parts of the object can be calculated. Light emitting diodes (LEDs) are becoming increasingly popular for lighting and illumination systems due to their low cost, small dimensions, low coherence, uniform illumination, high efficiency and long lifetime. These properties, together with recent developments in high brightness, ultraviolet operation and microstructured emitter design offer great potential for LEDs as light sources for microscopy. In this paper we demonstrate a novel structured illumination microscope using a blue micro-structured light emitting diode as the illumination source. The system is potentially very compact and has no-moving-parts

Beam divergence measurements of InGaN/GaN micro-array light-emitting diodes using confocal microscopy

The recent development of high-density, two-dimensional arrays of micrometer-sized InGaN/GaN light-emitting diodes (micro-LEDs) with potential applications from scientific instrumentation to microdisplays has created an urgent need for controlled manipulation of the light output from these devices. With directed light output these devices can be used in situations where collimated beams or light focused onto several thousand matrix points is desired. In order to do this effectively, the emission characteristics of the devices must be fully understood and characterized. Here we utilize confocal microscopy to directly determine the emission characteristics and angular beam divergences from the individual micro-LED elements. The technique is applied to both top (into air) and bottom (through substrate) emission in arrays of green (540 nm), blue (470 nm), and UV (370 nm) micro-LED devices, at distances of up to 50 µm from the emission plane. The results are consistent with simple optical modeling of the expected beam profiles

Correlation between muonic levels and nuclear structure in muonic atoms

A method that deals with the nucleons and the muon unitedly is employed to investigate the muonic lead, with which the correlation between the muon and nucleus can be studied distinctly. A "kink" appears in the muonic isotope shift at a neutron magic number where the nuclear shell structure plays a key role. This behavior may have very important implications for the experimentally probing the shell structure of the nuclei far away from the $\beta$-stable line. We investigate the variations of the nuclear structure due to the interaction with the muon in the muonic atom and find that the nuclear structure remains basically unaltered. Therefore, the muon is a clean and reliable probe for studying the nuclear structure. In addition, a correction that the muon-induced slight change in the proton density distribution in turn shifts the muonic levels is investigated. This correction to muonic level is as important as the Lamb shift and high order vacuum polarization correction, but is larger than anomalous magnetic moment and electron shielding correction.Comment: 2 figure

Fabrication of Diamond Nanowires for Quantum Information Processing Applications

We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and optical modes of a nanowire, and to find an optimal range of nanowire diameters that allows for large collection efficiency of emitted photons. Inductively coupled plasma (ICP) reactive ion etching (RIE) with oxygen is used to fabricate the nanowires. Drop-casted nanoparticles (including $\mathrm{Au}$, $\mathrm{SiO_{2}}$ and $\mathrm{Al_2O_3}$) as well as electron beam lithography defined spin-on glass and evaporated $\mathrm{Au}$ have been used as an etch mask. We found $\mathrm{Al_2O_3}$ nanoparticles to be the most etch resistant. At the same time FOx e-beam resist (spin-on glass) proved to be a suitable etch mask for fabrication of ordered arrays of diamond nanowires. We were able to obtain nanowires with near vertical sidewalls in both polycrystalline and single crystal diamond. The heights and diameters of the polycrystalline nanowires presented in this paper are \unit[\approx1]{\mu m} and \unit[120-340]{nm}, respectively, having a \unit[200]{nm/min} etch rate. In the case of single crystal diamond (types Ib and IIa) nanowires the height and diameter for different diamonds and masks shown in this paper were \unit[1-2.4]{\mu m} and \unit[120-490]{nm} with etch rates between \unit[190-240]{nm/min}.Comment: 11 pages, 26 figures, submitted to Diamond and related Materials; http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TWV-4Y7MM1M-1&_user=10&_coverDate=01%2F25%2F2010&_rdoc=1&_fmt=high&_orig=search&_sort=d&_docanchor=&view=c&_acct=C000050221&_version=1&_urlVersion=0&_userid=10&md5=6dc58b30f4773a710c667306fc541cc

Equilibrium and dynamical properties of the ANNNI chain at the multiphase point

We study the equilibrium and dynamical properties of the ANNNI (axial next-nearest-neighbor Ising) chain at the multiphase point. An interesting property of the system is the macroscopic degeneracy of the ground state leading to finite zero-temperature entropy. In our equilibrium study we consider the effect of softening the spins. We show that the degeneracy of the ground state is lifted and there is a qualitative change in the low temperature behaviour of the system with a well defined low temperature peak of the specific heat that carries the thermodynamic ``weight'' of the ground state entropy. In our study of the dynamical properties, the stochastic Kawasaki dynamics is considered. The Fokker-Planck operator for the process corresponds to a quantum spin Hamiltonian similar to the Heisenberg ferromagnet but with constraints on allowed states. This leads to a number of differences in its properties which are obtained through exact numerical diagonalization, simulations and by obtaining various analytic bounds.Comment: 9 pages, RevTex, 6 figures (To appear in Phys. Rev. E

Charge order and low frequency spin dynamics in lanthanum cuprates revealed by Nuclear Magnetic Resonance

We report detailed 17O, 139La, and 63Cu Nuclear Magnetic Resonance (NMR) and Nuclear Quadrupole Resonance (NQR) measurements in a stripe ordered La1.875Ba0.125CuO4 single crystal and in oriented powder samples of La1.8-xEu0.2SrxCuO4. We observe a partial wipeout of the 17O NMR intensity and a simultaneous drop of the 17O electric field gradient (EFG) at low temperatures where the spin stripe order sets in. In contrast, the 63Cu intensity is completely wiped out at the same temperature. The drop of the 17O quadrupole frequency is compatible with a charge stripe order. The 17O spin lattice relaxation rate shows a peak similar to that of the 139La, which is of magnetic origin. This peak is doping dependent and is maximal at x ~ 1/8.Comment: submitted to European Physical Journal Special Topic

Electron-phonon anomaly related to charge stripes: static stripe phase versus optimally-doped superconducting La1.85Sr0.15CuO4

Inelastic neutron scattering was used to study the Cu-O bond-stretching vibrations in optimally doped La1.85Sr0.15CuO4 (Tc = 35 K) and in two other cuprates showing static stripe order at low temperatures, i.e. La1.48Nd0.4Sr0.12CuO4 and La1.875Ba0.125CuO4. All three compounds exhibit a very similar phonon anomaly, which is not predicted by conventional band theory. It is argued that the phonon anomaly reflects a coupling to charge inhomogeneities in the form of stripes, which remain dynamic in superconducting La1.85Sr0.15CuO4 down to the lowest temperatures. These results show that the phonon effect indicating stripe formation is not restricted to a narrow region of the phase diagram around the so-called 1/8 anomaly but occurs in optimally doped samples as well.Comment: to appear in J. Low Temp. Phy