2,827 research outputs found

    Radio Sources in the NCP Region Observed with the 21 Centimeter Array

    Full text link
    We present a catalog of 624 radio sources detected around the North Celestial Pole (NCP) with the 21 Centimeter Array (21CMA), a radio interferometer dedicated to the statistical measurement of the epoch of reionization (EoR). The data are taken from a 12 h observation made on 2013 April 13, with a frequency coverage from 75 to 175 MHz and an angular resolution of ~ 4 arcmin. The catalog includes flux densities at eight sub-bands across the 21CMA bandwidth and provides the in-band spectral indices for the detected sources. To reduce the complexity of interferometric imaging from the so-called "w" term and ionospheric effects, the present analysis are restricted to the east-west baselines within 1500 m only. The 624 radio sources are found within 5 degrees around the NCP down to ~ 0.1 Jy. Our source counts are compared, and also exhibit a good agreement, with deep low-frequency observations made recently with the GMRT and MWA. In particular, for fainter radio sources below ~ 1 Jy, we find a flattening trend of source counts towards lower frequencies. While the thermal noise (~0.4 mJy) is well controlled to below the confusion limit, the dynamical range (~10^4) and sensitivity of current 21CMA imaging is largely limited by calibration and deconvolution errors, especially the grating lobes of very bright sources, such as 3C061.1, in the NCP field which result from the regular spacings of the 21CMA. We note that particular attention should be paid to the extended sources, and their modeling and removals may constitute a large technical challenge for current EoR experiments. Our analysis may serve as a useful guide to design of next generation low-frequency interferometers like the Square Kilometre Array.Comment: 16 pages, 21 figures, 7 tables, 1 machine readable table, accepted for publication in Ap

    Endoplasmic Reticulum Stress-Mediated Apoptosis Involved in Indirect Recognition Pathway Blockade Induces Long-Term Heart Allograft Survival

    Get PDF
    Implementation of dendritic cell- (DC-) based therapies in organ transplantation can reduce dependency on nonspecific immunosuppression. Despite extensive research, mechanisms of equipped DCs inducing transplant tolerance remain incomplete. Here, we applied RNA interference technique to inhibit CD80 and CD86 expression in host bone marrow-derived DCs. This approach could specifically and effectively knock down CD80 and CD86 expression. T cells primed by these DCs inhibited allogeneic responses. Administration of recipient DCs loaded with alloantigen after CD80 and CD86 blockade prolonged cardiac allograft survival. We also found a higher percentage of apoptotic T cells in lymph tissues and grafts than that detected in control group. In addition, these T cells expressed high expression of GRP78 than controls, indicating activation of unfolded protein responses. Upregulation of CHOP expression among these cells suggested that the endoplasmic reticulum stress (ERS) response switched to a proapoptotic response. Our results indicated that ERS-induced apoptosis may be involved in allogeneic T-cell apoptosis, and the ERS-mediated apoptosis pathway may be a novel target in clinical prevention and therapy of allograft rejection

    Global Flow of Foreign Aid and Change in Recipients’ Local Labor Institutions

    Get PDF
    How does foreign aid affect recipient countries’ labor institutions? Extant empirical evidence is sparse due to ambiguous theoretical predictions and potential endogeneity issues. This study uses data detailing aid flow and institutional functions to mitigate such inconclusiveness and displays originality by constructing a concise theoretical framework in which foreign aid contributes to the improvement of the labor institutions in recipient countries through two mechanisms—economic growth purpose and expected aid attraction. The findings indicate that only aid to enhance local economic growth provides incentives to change domestic labor markets. Such effects have a more crucial influence on labor institutions of minimum wage, collective bargaining rights, and working hours than those related to hiring and firing regulations, mandated costs for worker dismissal, and conscription. For comparison with the actual aid level, we construct forecasted proxies to capture exogenous fluctuations in aid, determining that domestic labor markets can also change via a novel mechanism, as the recipient voluntarily mimics the funder’s labor policies in anticipation of receiving future aid, with exact amounts derived from the noninstitutional characteristics of pairs of bilateral recipient and giver economies. Therefore, we provide policy implications for the aid giver on how to secure a continued and increased aid flow and for the aid receivers on which aspects of reforming measures are most effective in enhancing the labor market regulations

    Fully Probabilistic Analysis of FRP-to-Concrete Bonded Joints Considering Model Uncertainty

    Get PDF
    This work presents a full reliability-based analysis framework for fiber-reinforced polymer(FRP)-to-concrete bonded joints considering model uncertainty. Eight frequently used bond strength models for FRP-to-concrete bonded joints were calibrated by defining a model factor. A total of 641 well-documented tests were considered. Four of the eight models had model factors that correlated with input design parameters and the systematic part of the model factor was removed by a regression equation f. By doing this type of characterization, all eight model factors could be comparatively uniform and described by lognormally distributed random variables. The merit of the uniform model uncertainties after calibration for the eight models was established by the reliability analysis. This study improves the predictability of concrete strengthened with fiber composites and provides useful suggestions on their model uncertainties in engineering practice

    Flexural Strength of Carbon Fiber Reinforced Polymer Repaired Cracked Rectangular Hollow Section Steel Beams

    Get PDF
    The flexural behavior of rectangular hollow section (RHS) steel beams with initial crack strengthened externally with carbon fiber reinforced polymer (CFRP) plates was studied. Eight specimens were tested under three-point loading to failure. The experimental program included three beams as control specimens and five beams strengthened with CFRP plates with or without prestressing. The load deflection curves were graphed and failure patterns were observed. The yield loads and ultimate loads with or without repairing were compared together with the strain distributions of the CFRP plate. It was concluded that yield loads of cracked beams could be enhanced with repairing. Meanwhile, the ultimate loads were increased to some extent. The effect of repair became significant with the increase of the initial crack depth. The failure patterns of the repaired specimens were similar to those of the control ones. Mechanical clamping at the CFRP plate ends was necessary to avoid premature peeling between the CFRP plate and the steel beam. The stress levels in CFRP plates were relatively low during the tests. The use of prestressing could improve the utilization efficiency of CFRP plates. It could be concluded that the patching repair could be used to restore the load bearing capacity of the deficient steel beams

    Quetiapine N-oxide–fumaric acid (2/1)

    Get PDF
    The title compound (systematic name: 2-{2-[4-(dibenzo[b,f][1,4]thia­zepin-11-yl)piperazin-1-yl 1-oxide]eth­oxy}ethanol–fumaric acid (2/1)), C21H25N3O3S·0.5C4H4O4, is one of the oxidation products of quetiapine hemifumaric acid. In the tricyclic fragment, the central thia­zepine ring displays a boat conformation and the benzene rings are inclined to each other at a dihedral angle of 72.0 (2)°. The piperazine ring adopts a chair conformation with its eth­oxy­ethanol side chain oriented equatorially. In addition to the main mol­ecule, the asymmetric unit contains one-half mol­ecule of fumaric acid, the complete mol­ecule being generated by inversion symmetry. In the crystal, O—H⋯O hydrogen bonds link the components into corrugated layers parallel to bc plane

    A Study of the Merger History of the Galaxy Group HCG 62 Based on X-Ray Observations and SPH Simulations

    Full text link
    We choose the bright compact group HCG 62, which was found to exhibit both excess X-ray emission and high Fe abundance to the southwest of its core, as an example to study the impact of mergers on chemical enrichment in the intragroup medium. We first reanalyze the high-quality Chandra and XMM-Newton archive data to search for the evidence for additional SN II yields, which is expected as a direct result of the possible merger-induced starburst. We reveal that, similar to the Fe abundance, the Mg abundance also shows a high value in both the innermost region and the southwest substructure, forming a high-abundance plateau, meanwhile all the SN Ia and SN II yields show rather flat distributions in >0.1r200>0.1r_{200} in favor of an early enrichment. Then we carry out a series of idealized numerical simulations to model the collision of two initially isolated galaxy groups by using the TreePM-SPH GADGET-3 code. We find that the observed X-ray emission and metal distributions, as well as the relative positions of the two bright central galaxies with reference to the X-ray peak, can be well reproduced in a major merger with a mass ratio of 3 when the merger-induced starburst is assumed. The `best-match' snapshot is pinpointed after the third pericentric passage when the southwest substructure is formed due to gas sloshing. By following the evolution of the simulated merging system, we conclude that the effects of such a major merger on chemical enrichment are mostly restricted within the core region when the final relaxed state is reached.Comment: Accepted for publication in the Astrophysical Journa
    corecore