Derivation of a Non-Local Interfacial Hamiltonian for Short-Ranged Wetting II: General Diagrammatic Structure

In our first paper, we showed how a non-local effective Hamiltionian for short-ranged wetting may be derived from an underlying Landau-Ginzburg-Wilson model. Here, we combine the Green's function method with standard perturbation theory to determine the general diagrammatic form of the binding potential functional beyond the double-parabola approximation for the Landau-Ginzburg-Wilson bulk potential. The main influence of cubic and quartic interactions is simply to alter the coefficients of the double parabola-like zig-zag diagrams and also to introduce curvature and tube-interaction corrections (also represented diagrammatically), which are of minor importance. Non-locality generates effective long-ranged many-body interfacial interactions due to the reflection of tube-like fluctuations from the wall. Alternative wall boundary conditions (with a surface field and enhancement) and the diagrammatic description of tricritical wetting are also discussed.Comment: (14 pages, 2 figures) Submitted J. Phys. Condens. Matte

Experimental studies of the non-adiabatic escape problem

Noise-induced transitions between coexisting stable states of a periodically driven nonlinear oscillator have been investigated by means of analog experiments and numerical simulations in the nonadiabatic limit for a wide range of oscillator parameters. It is shown that, for over-damped motion, the field-induced corrections to the activation energy can be described quantitatively in terms of the logarithmic susceptibility (LS) and that the measured frequency dispersion of the corresponding corrections for a weakly damped nonlinear oscillator is in qualitative agreement with the theoretical prediction. Resonantly directed diffusion is observed in numerical simulations of a weakly damped oscillator. The possibility of extending the LS approach to encompass escape from the basin of attraction of a quasi-attractor is discussed

Crossover behavior and multi-step relaxation in a schematic model of the cut-off glass transition

We study a schematic mode-coupling model in which the ideal glass transition is cut off by a decay of the quadratic coupling constant in the memory function. (Such a decay, on a time scale tau_I, has been suggested as the likely consequence of activated processes.) If this decay is complete, so that only a linear coupling remains at late times, then the alpha relaxation shows a temporal crossover from a relaxation typical of the unmodified schematic model to a final strongly slower-than-exponential relaxation. This crossover, which differs somewhat in form from previous schematic models of the cut-off glass transition, resembles light-scattering experiments on colloidal systems, and can exhibit a `slower-than-alpha' relaxation feature hinted at there. We also consider what happens when a similar but incomplete decay occurs, so that a significant level of quadratic coupling remains for t>>tau_I. In this case the correlator acquires a third, weaker relaxation mode at intermediate times. This empirically resembles the beta process seen in many molecular glass formers. It disappears when the initial as well as the final quadratic coupling lies on the liquid side of the glass transition, but remains present even when the final coupling is only just inside the liquid (so that the alpha relaxation time is finite, but too long to measure). Our results are suggestive of how, in a cut-off glass, the underlying `ideal' glass transition predicted by mode-coupling theory can remain detectable through qualitative features in dynamics.Comment: 14 pages revtex inc 10 figs; submitted to pr

Alibava : A portable readout system for silicon microstrip sensors

A portable readout system for silicon microstrip sensors is currently being developed. This system uses a front-end readout chip, which was developed for the LHC experiments. The system will be used to investigate the main properties of this type of sensors and their future applications. The system is divided in two parts: a daughter board and a mother board. The first one is a small board which contains two readout chips and has fan-ins and sensor support to interface the sensors. The last one is intended to process the analogue data that comes from the readout chips and from external trigger signals, to control the whole system and to communicate with a PC via USB. The core of this board is a FPGA that controls the readout chips, a 10 bit ADC, an integrated TDC and an USB controller. This board also contains the analogue electronics to process the data that comes from the readout chips. There is also provision for an external trigger input (e.g. scintillator trigger) and a 'synchronised' trigger output for pulsing an external excitation source (e.g. laser system)

Disk-like bicelles in block copolymer/homopolymer blends

Mixtures of micelle-forming and lamella-forming amphiphiles in solution can form disk-shaped bilayers, sometimes referred to as bicelles. Using self-consistent field theory (SCFT), we investigate the structure and stability of these aggregates in a blend of two species of PS-PDMS diblock with PDMS homopolymer at 225C. We find that the center of each disk is mainly composed of lamella-forming diblocks, while its thicker rim is mostly formed of micelle-forming diblocks. However, this segregation is not perfect, and the concentration of micelle formers is of the order of 10% on the flat central surface of the bicelle. We also find that the addition of micelle former to the mixture of lamella former and homopolymer is necessary for disk-like bicelles to be stable. Specifically, the free energy density of the disk has a minimum as a function of the disk radius when both micelle- and lamella-forming diblocks are present, indicating that the bicelles have a preferred, finite radius. However, it decays monotonically when only lamella former is present, indicating that the bicelle structure is always unstable with respect to further aggregation in these systems. Finally, we identify a concentration range where the bicelle is predicted to have a lower free energy density than the simple spherical, cylindrical and lamellar aggregates formed with similar amphiphile number fractions

A double-sided silicon micro-strip super-module for the ATLAS inner detector upgrade in the high-luminosity LHC

The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 × 1034 cm−2 s−1. For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail

A double-sided, shield-less stave prototype for the ATLAS upgrade strip tracker for the high luminosity LHC

A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools